Next Article in Journal
Adaptive Machining Method for Helical Milling of Carbon Fiber-Reinforced Plastic/Titanium Alloy Stacks Based on Interface Identification
Next Article in Special Issue
Microhardness and Microstructure Analysis of the LPBF Additively Manufactured 18Ni300
Previous Article in Journal
Development of Thermodynamic Criteria for Determining the Composition of Duplex Stainless Steels with High Corrosion Resistance
Previous Article in Special Issue
Evaluation of the Depth and Width of Cuts after Controlled-Depth Abrasive Water Jet Machining Using Low Pressure
 
 
Article

Article Versions Notes

Materials 2024, 17(2), 295; https://doi.org/10.3390/ma17020295
Action Date Notes Link
article xml file uploaded 7 January 2024 09:31 CET Original file -
article xml uploaded. 7 January 2024 09:31 CET Update https://www.mdpi.com/1996-1944/17/2/295/xml
article pdf uploaded. 7 January 2024 09:31 CET Version of Record https://www.mdpi.com/1996-1944/17/2/295/pdf
article html file updated 7 January 2024 09:33 CET Original file https://www.mdpi.com/1996-1944/17/2/295/html
Back to TopTop