Next Article in Journal
Changes to Material Phase and Morphology Due to High-Level Molybdenum Doping of ZnO Nanorods: Influence on Luminescence and Defects
Previous Article in Journal
Preparation of Titania–Silica Composite Aerogel at Atmospheric Pressure and Its Catalytic Performance in the Synthesis of Poly (Butylene Succinate)
Previous Article in Special Issue
Effect of Heating on Hot Deformation and Microstructural Evolution of Ti-6Al-4V Titanium Alloy
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 16
Issue 9
10.3390/ma16093293
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Editorial

Advances in Sheet Metal Forming Processes of Lightweight Alloys

by
Mateusz Kopec
1 and
Denis J. Politis
2,*
1
Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warsaw, Poland
2
Department of Mechanical and Manufacturing Engineering, University of Cyprus, Nicosia 1678, Cyprus
*
Author to whom correspondence should be addressed.
Materials 2023, 16(9), 3293; https://doi.org/10.3390/ma16093293
Submission received: 5 April 2023 / Accepted: 16 April 2023 / Published: 22 April 2023
(This article belongs to the Special Issue Advances in Sheet Metal Forming Processes of Lightweight Alloys)
Versions Notes

Excerpt

Note: In lieu of an abstract, this is an excerpt from the first page.

With the continuously growing need for more fuel-efficient and sustainable vehicles, the characterization and modeling of metal-forming processes have been indispensable in the development of new products [...]

Share and Cite

MDPI and ACS Style

Kopec, M.; Politis, D.J. Advances in Sheet Metal Forming Processes of Lightweight Alloys. Materials 2023, 16, 3293. https://doi.org/10.3390/ma16093293

AMA Style

Kopec M, Politis DJ. Advances in Sheet Metal Forming Processes of Lightweight Alloys. Materials. 2023; 16(9):3293. https://doi.org/10.3390/ma16093293

Chicago/Turabian Style

Kopec, Mateusz, and Denis J. Politis. 2023. "Advances in Sheet Metal Forming Processes of Lightweight Alloys" Materials 16, no. 9: 3293. https://doi.org/10.3390/ma16093293

APA Style

Kopec, M., & Politis, D. J. (2023). Advances in Sheet Metal Forming Processes of Lightweight Alloys. Materials, 16(9), 3293. https://doi.org/10.3390/ma16093293

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop