Article Versions Notes

Szablewski P, Legutko S, Mróz A, Garbiec D, Czajka R, Smak K, Krawczyk B. Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique. Materials. 2023; 16(3):949. https://doi.org/10.3390/ma16030949

Szablewski, Piotr, Stanisław Legutko, Adrian Mróz, Dariusz Garbiec, Rafał Czajka, Krzysztof Smak, and Bartłomiej Krawczyk. 2023. "Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique" Materials 16, no. 3: 949. https://doi.org/10.3390/ma16030949

Szablewski, P., Legutko, S., Mróz, A., Garbiec, D., Czajka, R., Smak, K., & Krawczyk, B. (2023). Surface Topography Description after Turning Inconel 718 with a Conventional, Wiper and Special Insert Made by the SPS Technique. Materials, 16(3), 949. https://doi.org/10.3390/ma16030949