Next Article in Journal
The Influence of Solar Sintering on Copper Heat Exchanger Parts with Controlled 3D-Printed Morphology
Previous Article in Journal
Waterborne Polyurethane Acrylates Preparation towards 3D Printing for Sewage Treatment
 
 

Order Article Reprints

Journal: Materials, 2022
Volume: 15
Number: 3323

Article: Multiobjective Optimization of Laser Polishing of Additively Manufactured Ti-6Al-4V Parts for Minimum Surface Roughness and Heat-Affected Zone
Authors: by Juliana S. Solheid, Ahmed Elkaseer, Torsten Wunsch, Steffen Scholz, Hans J. Seifert and Wilhelm Pfleging
Link: https://www.mdpi.com/1996-1944/15/9/3323

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop