Study on Structural Design and Manufacturing of Sandwich Composite Floor for Automotive Structure

In this work, structural design and manufacturing of sandwich composite floor for automobile was performed. The tensile and compression strength of specimen were investigated. Based on this, structural design of floor board was performed. The sandwich composite floor board are subject to payload. The maximum load was analyzed in consideration of the safety factor. The structural design and analysis were performed in consideration of applied load. The finite element analysis method was applied to investigate structural safety. The stress, displacement, and buckling analysis was carried out. Through the structural analysis, it was confirmed that the designed floor board structure is safety. Based on the result, the manufacturing of prototype was conducted. Finally, test and evaluation of composite floor board was performed.