Next Article in Journal
X-ray CT Analysis of the Cross-Section of a 3D-Printed Deformed Layer
Next Article in Special Issue
Advancements in Additive Manufacturing of Tantalum via the Laser Powder Bed Fusion (PBF-LB/M): A Comprehensive Review
Previous Article in Journal
The Influence of Density on the Value of Young’s Modulus for Dry Ice
Previous Article in Special Issue
Surface Finishing of Additive Manufactured Ti-6Al-4V Alloy: A Comparison between Abrasive Fluidized Bed and Laser Finishing
 
 
Article

Article Versions Notes

Materials 2021, 14(24), 7749; https://doi.org/10.3390/ma14247749
Action Date Notes Link
article html file updated 21 August 2026 03:30 CEST Update https://www.mdpi.com/1996-1944/14/24/7749/html
article html file updated 23 July 2026 16:35 CEST Update -
article html file updated 3 March 2026 04:36 CET Update -
article xml uploaded. 3 March 2026 04:33 CET Update https://www.mdpi.com/1996-1944/14/24/7749/xml
article xml uploaded. 3 March 2026 04:33 CET Update -
article pdf uploaded. 3 March 2026 04:33 CET Updated version of record https://www.mdpi.com/1996-1944/14/24/7749/pdf
Correction published 3 March 2026 00:00 CET Correction https://www.mdpi.com/1996-1944/19/5/968
article html file updated 30 July 2022 22:31 CEST Update -
article html file updated 15 December 2021 14:59 CET Original file -
article pdf uploaded. 15 December 2021 14:57 CET Version of Record https://www.mdpi.com/1996-1944/14/24/7749/pdf-vor
article xml uploaded. 15 December 2021 14:57 CET Update -
article xml file uploaded 15 December 2021 14:57 CET Original file -
Back to TopTop