Next Article in Journal
Effect of Electrolytic Manganese Residue in Fly Ash-Based Cementitious Material: Hydration Behavior and Microstructure
Next Article in Special Issue
Measurement of the Anisotropic Dynamic Elastic Constants of Additive Manufactured and Wrought Ti6Al4V Alloys
Previous Article in Journal
Structure and Phase State of Ti49.4Ni50.6 (at%) Hydrogenated in Normal Saline
Previous Article in Special Issue
Directionally-Dependent Mechanical Properties of Ti6Al4V Manufactured by Electron Beam Melting (EBM) and Selective Laser Melting (SLM)
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 7048

Article: Wear Behavior of a Heat-Treatable Al-3.5Cu-1.5Mg-1Si Alloy Manufactured by Selective Laser Melting
Authors: by Pei Wang, Yang Lei, Jun-Fang Qi, Si-Jie Yu, Rossitza Setchi, Ming-Wei Wu, Jürgen Eckert, Hai-Chao Li and Sergio Scudino
Link: https://www.mdpi.com/1996-1944/14/22/7048

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop