Next Article in Journal
Investigations of Effects of Intermetallic Compound on the Mechanical Properties and Shape Memory Effect of Ti–Au–Ta Biomaterials
Next Article in Special Issue
Influence of C and N on Strain-Induced Martensite Formation in Fe-15Cr-7Mn-4Ni-0.5Si Austenitic Steel
Previous Article in Journal
Parameter Optimization of Laser Direct-Write Patterning on Indium Tin Oxide/Polycarbonate Thin Films Using Multi-Performance Characteristics Analysis
Previous Article in Special Issue
Dissimilar Laser Welding of Austenitic Stainless Steel and Abrasion-Resistant Steel: Microstructural Evolution and Mechanical Properties Enhanced by Post-Weld Heat Treatment
 
 

Order Article Reprints

Journal: Materials, 2021
Volume: 14
Number: 5809

Article: Tensile Properties and Deformation of AISI 316L Additively Manufactured with Various Energy Densities
Authors: by Matias Jaskari, Sumit Ghosh, Ilkka Miettunen, Pentti Karjalainen and Antti Järvenpää
Link: https://www.mdpi.com/1996-1944/14/19/5809

MDPI offers high quality article reprints with convenient shipping to destinations worldwide. Each reprint features a 270 gsm bright white cover and 105 gsm premium white paper, bound with two stitches for durability and printed in full color. The cover design is customized to your article and designed to be complimentary to the journal.

Order Cost and Details

Shipping Address

Billing Address

Notes or Comments

Validate and Place Order

The order must be prepaid after it is placed

req denotes required fields.
Back to TopTop