Next Article in Journal
The Effect of Abrasive Waterjet Machining Parameters on the Condition of Al-Si Alloy
Next Article in Special Issue
Piezoelectric Implant Site Preparation: Influence of Handpiece Movements on Temperature Elevation
Previous Article in Journal
First Human Leucocyte Antigen (HLA) Response and Safety Evaluation of Fibrous Demineralized Bone Matrix in a Critical Size Femoral Defect Model of the Sprague-Dawley Rat
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Materials
Volume 13
Issue 14
10.3390/ma13143123
materials-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Five Degree Internal Conical Connection and Marginal Bone Stability around Subcrestal Implants: A Retrospective Analysis

by
Diego Lops
1,*,
Michele Stocchero
2,
Jason Motta Jones
3,
Alessandro Freni
4,
Antonino Palazzolo
1 and
Eugenio Romeo
1
1
Department of Prosthodontics, Dental Clinic, School of Dentistry, University of Milan, 20142 Milan, Italy
2
Department of Neurosciences, University of Padova, 35128 Padua, Italy
3
Department of Oral Surgery, Dental Clinic, Humanitas University, 20089 Milan, Italy
4
Private Practice, 22030 Orsenigo, Italy
*
Author to whom correspondence should be addressed.
Materials 2020, 13(14), 3123; https://doi.org/10.3390/ma13143123
Submission received: 3 June 2020 / Revised: 5 July 2020 / Accepted: 7 July 2020 / Published: 13 July 2020
(This article belongs to the Special Issue Advanced Materials and Techniques in Oral Implantology)
Browse Figures
Versions Notes

Abstract

:
Background: There is limited information on the effect of the connection between subcrestally placed implants and abutments on marginal bone levels. The aim of the present retrospective study was to evaluate marginal bone levels after definitive prosthesis delivery around implants with an internal 5° conical connection placed in a subcrestal position. Materials and methods: Patients treated with fixed prostheses supported by implants placed at a subcrestal level between 2012 and 2018 were recalled for a follow-up examination. All implants had 5° internal conical connection with platform switching. Radiographic marginal bone level (MBL) was measured. MBL change between prosthetic delivery (t0) and follow-up examination (t1) was calculated. A multiple regression model was performed to identify the most significant predictors on MBL change. Results: Ninety-three patients and 410 implants, with a mean follow-up of 2.72 ± 1.31 years, were examined. Mean MBL was −1.09 ± 0.65 mm and −1.00 ± 0.37 mm at t0 and t1, respectively, with a mean bone remodeling of 0.09 ± 0.68 mm. An implant’s vertical position in relation to the bone crest, the year of follow up and the presence of type-2 controlled diabetes were demonstrated to be influencing factors for MBL modifications. Conclusions: Subcrestally placed implants with platform switching and internal conical connection maintained stable bone levels over a mean follow-up of more than 2 years. How a tight internal conical connection between abutment and implant may contribute to this clinical evidence should be more deeply investigated. MBL variations seem to be mostly influenced by an implant’s vertical position and presence of type-2 controlled diabetes.

1. Introduction

The use of dental implants has become a common option for the fixed rehabilitation of single, multiple, and complete edentulous areas [1,2]. Long-term stability of marginal bone level (MBL) around implants is one of the most commonly used criteria for defining implant success [3]. According to previous reports on two-piece implants, marginal bone resorption mostly occurs within the first year of implant functioning [4,5]. After this initial crestal alteration, an implant typically develops a steady state situation with no relevant further bone loss in the following years [6]. Nevertheless, for an optimal result, preserving the initially-achieved marginal bone levels to be as coronal as possible has been advocated for [7].
From the treatment protocol proposed by Brånemark, several modifications have been introduced over the past decades [8,9]. Different implant macro and micro designs, surgical procedures, and prosthetic protocols have been developed in order to improve implant treatments’ functional and aesthetic outcomes [10,11]. More specifically, implant-abutment interface (IAI) design and location have been deeply examined to minimize early marginal bone resorption [12,13,14]. It was observed that internal tapered IAI may provide better results in terms of stability, seal performance, and better load distribution compared to butt-joint interfaces [15,16,17]. Another strategy was to generate a horizontal discrepancy in diameter between the implant and the abutment, namely platform-switching [18]. Such an approach may contribute to preserving crestal bone levels [13].
Conical connections have proven to be superior to butt-joint interfaces at achieving a tight seal and reducing the microgap at the IAI, and have demonstrated improvements in crestal bone maintenance [19]. Nevertheless, most of clinical data on this type of connection are in reference to bone level implants [19]. A further factor that may influence the stability of peri-implant tissues is the IAI vertical position according to the bone ridge [20]. The surgical placement of the implant below the level of the crestal bone has been proposed to increase the esthetic emergence profile and avoid the implant threads’ exposure after the initial bone remodeling [21,22,23]. Peri-implant tissue alterations around implants placed subcrestally after 12 and 18 months were evaluated by some recent clinical trials [24,25]. No influence of implant vertical positioning was found. However, data on marginal bone maintenance for implants placed in a subcrustal position is actually limited, and the effect of the type of conical seal between abutment and fixture is still controversial.
Therefore, the aim of the present retrospective study was to assess marginal bone levels after definitive prosthesis delivery around implants with an internal 5° conical connection placed in a subcrestal position.

2. Materials and Methods

2.1. Patient Selection

The protocol of the present human study was approved by the University of Milan Ethical Committee (Prot. No. EC 02.04.20 REF 28/20) and was in accordance with the Helsinki Declaration guidelines, as revised in Fortaleza (2013).
All patients consecutively referred to a single dental clinic (Department of Prosthodontics, University of Milan, Milan, Italy) and treated with implant-supported fixed prostheses between January 2012 and December 2018 were screened for inclusion in this retrospective study. To be included in the study, all cases must have been treated with the same implant system provided with a 5 degree internal tapered IAI (Figure 1) and platform-switched abutments (Anyridge, MegaGen Implant Co., Gyeongbuk, South Korea) and placed at least 1 mm subcrestally.
Additional inclusion criteria were: absence of local inflammation; absence of oral mucosal disease; adequate oral hygiene; adequate bone volume at the implant site (enough for placement of implant at least 3.5 mm in diameter and 8 mm in length); and final rehabilitation with fixed implant-supported prosthesis.
Cases in which bone augmentation was necessary, or cases of immediate loading, were excluded. Furthermore, cases with no complete radiographical documentation from the implant placement to the follow-up control visit were excluded.
Additional exclusion criteria were: patients with systemic diseases (such as heart, coagulation, and leukocyte diseases or metabolic disorders); history of radiation therapy in the head and neck region; current treatment with steroids; neurological or psychiatric handicap that could interfere with good oral hygiene; immuno-compromised status, including infection with human immunodeficiency virus; severe clenching or bruxism; smoking habit (more than 15 cigarettes per day); drug or alcohol abuse; and inadequate compliance.
All included patients gave their written consent after being informed in detail about the objectives of the study. Surgical and prosthetic procedures were performed by a single operator (AF), as described in the following paragraphs.

2.2. Surgical and Prosthetic Procedures

All implants were placed with a two-stage surgical protocol. Implants with internal conical connection were inserted by keeping the vertical position of the IAI 1–2 mm below the nominal crestal level, as recommended by the manufacturer. An intra-operative radiograph was taken to confirm the subcrestal position of the implant. An inter-implant distance of 3 mm at least, and/or an interproximal space from 1.5 to 3 mm between an implant and the adjacent tooth were observed [26,27,28,29,30]. Three months later, a surgical re-entry was performed and trans-mucosal healing abutments were connected to the implants.
Two weeks after surgical re-entry, an implant-level impression was taken for the fabrication of a one-piece ti-base screw-retained temporary prosthesis. Provisional restorations were inserted from one week to 6 weeks after implant level impression. After a further waiting period from 8 to 12 weeks for soft tissue conditioning, a definitive impression was taken.
Different types of fixed restoration were delivered, based on clinical indications: single crowns (SC), partial fixed dentures (FPD), full fixed dentures (FFD), or Toronto bridges (TO). For screw-retained prostheses, a torque of 25 Ncm was used to install the definitive restorations by means of a proper torque wrench. For cemented restorations, abutments were torqued down to 25 Ncm and restorations were luted with a temporary cement (Temp-Bond Clear, Kerr Corporation, OR, USA). At definitive prosthesis delivery (t0), an intraoral periapical radiograph was taken.

2.3. Clinical and Radiographic Evaluations

All selected patients were recalled for a follow-up visit (t1) between September 2018 and February 2019. The following data were recorded: type of prosthesis, implant diameter and length, implant site, date of the prosthetic delivery, patient condition, including smoking habit (>10 cig/die), presence of type-2 diabetes, oral bisphosphonates drug intake. During the follow-up visit, an intraoral periapical radiograph and a clinical examination were performed. Furthermore, the peri-implant tissues and implant health status were evaluated following the guidelines on peri-implantitis and peri-implant mucositis diagnosis by the European Federation of Periodontology and the American Academy of Periodontology [31]. Peri-implant mucositis was defined if any bleeding and/or suppuration on gentle probing without bone loss. Besides, peri-implantitis was defined if any bleeding and/or suppuration on gentle probing, an increased probing depth and bone loss was detected.
All radiographs were taken with a standardized parallel technique with an X-ray apparatus supplied with a long cone and a Rinn Universal Collimator (Dentsply RINN, York, Pennsylvania) The following exposure parameters were used: 65-90 kV, 7.5-10 mA and 0.22-0,25 s. All radiographs were stored on a PC. Radiographic images were then analyzed with a software program (Image J, National Insitute of Health, Bethesda, Rockville, MA, USA). Before measurement, each radiograph was calibrated by using the implant diameter and length as reference measures to correct any distortion.
Marginal Bone Level (MBL) was measured for t0 and t1 according to Linkevicius et al. as the following [32]: the distance between the implant neck (bevel) and the first bone-to-implant contact or the distance between the implant neck and the marginal bone in contact with the line drawn from the implant bevel following the long axis of the implant. Measurements were taken for the mesial and the distal aspect of each implant (Figure 2). An average value for each implant was then calculated. Measurements (in mm) were performed to the nearest 0.1 mm using a monitor with the screen resolution of 1920 x 1080 and a magnification (7x) of the images. A single operator performed all measurements (A.P.).
Measurements in which the implant neck was located below the bone level were classified as negative values. On the contrary, measurements in which implant neck was above the bone level were classified as positive values.
Based on the time elapsed between t0 and t1, cases were grouped by years of follow-up (2 years, 3 years, 4 years, 5 years, 6 years, 7 years and 9 years).

2.4. Statistical Analysis

Each implant was considered as the statistical unit. The following outcomes were considered: MBL, MBL change, implant survival, presence of mucositis, and presence of peri-implantitis. No significant differences were found by comparing the means of mesial and distal MBL at each follow-up with a t-test for paired data, hence the mean between mesial and distal MBL was used in the subsequent analysis. Descriptive statistics was performed by calculating mean and standard deviation for continuous variables and frequency distribution for categorical variables respectively. The normality of data distribution was checked. A univariate analysis on MBL change according to the effects of type of prosthesis, implant diameter, implant length, implant position, and jaw was performed using Kruskal-Wallis or Mann-Whitney U-tests. Moreover, the prosthesis type frequency distribution based on the follow-up was calculated. MBL change at patient level, using the patient as a unit was calculated as well. The influence of the patient’s clinical condition on MBL changes was verified using a Kruskal-Wallis test. Variables which showed a significant relationship with MBL change in a univariate analysis (MBL(t0) and pathology) were introduced into a step-wise multiple regression model, and the MBL change was used as the dependent variable. Major outliers were excluded, and the “pathology” outcome was transformed into “diabetes” (yes/no). A statistical software package (IBM SPSS Statistics for Mac, v. 22) was used for descriptive statistics and model processing.

3. Results

3.1. Patient Features

Of all treated patients, 93 patients (44 males and 49 females) aged from 22 to 86 years (mean age 57.3 ± 34.4 years) were selected for the present study, according to the inclusion and exclusion criteria.
A total of 410 implants were positioned and the average follow-up period was 2.72 years. Frequencies of implant diameter and length are reported in Table 1. Two-hundred thirty-one implants were inserted in the maxilla, while 179 in the mandible, respectively; fixture distribution in anterior or posterior area was reported in Table 2. The frequencies for each type of prosthesis are reported in Table 3.

3.2. Clinical and Radiographic Evaluations

Mean MBL was −1.09 ± 0.65 mm and −1.00 ± 0.37 mm at t0 and t1, respectively, with a mean marginal bone remodeling of 0.09 ± 0.68 mm (Table 4). MBL at t1 was significantly lower than MBL at t0 (p < 0.001, Wilcoxon-Mann. Whitney). There was a statistically significant difference on MBL change among the clinical conditions (p = 0.031, Kruskal-Wallis) (Table 5). Mean MBL change was greater in patients with diabetes (−0.42 ± 0.73 mm), however, 1 vs. 1 post-hoc tests did not reveal any difference between one condition and another. Mean values of MBL change at implants with 2 years of follow-up and implants with >2 years are showed in Table 6. Mean MBL change at implants with 2 years of follow-up was significantly lower than implants with >2 years (p < 0.001 Mann-Whitney U Test).
Cumulative MBL at baseline (t0) and after 2 years from loading were calculated and are reported in Figure 3.
Mean MBL change was also calculated for each patient based on clinical systemic conditions (Table 5, Table 6 and Table 7).
The multiple regression analysis revealed that the combination of time from prosthetic delivery (follow-up), the initial vertical position of the implant (MBL(t0)), and the presence of type-2 diabetes (Diabetes) may provide the highest predictability of MBL change (adjusted R2: 0.213). Follow-up resulted to be the most significant predictor for MBL change followed by the MBL(t0) and diabetes (Table 7). Estimated average values of MBL change according to the initial vertical position of the implant is shown in Figure 4, and according to the other predictors in Table 8.

4. Discussion

The aim of the present cohort study was to investigate the peri-implant marginal bone behavior around implants placed at subcrestal level in the medium to long-term period. Overall, the results showed that marginal bone alterations after definitive prosthesis delivery were modest during the follow-up period. On average, the implant neck was located 1.09 mm apical to the marginal bone level at time of definitive prosthesis delivery (t0). At follow-up examination, the average MBL was 1.00 mm apical to the marginal bone, and a clinically irrelevant bone loss of 0.09 mm was observed from t0 to t1. This finding is in accordance with previous studies showing that the major component of early marginal bone loss around both equicrestal and subcrestal implants occurs after implant uncovering and increases in the first months after functional loading before stabilizing [32,33,34]. In the present study, baseline radiography was performed at definitive prosthesis delivery (11–20 weeks after second stage surgery), when the greatest amount of bone remodeling due to the initial adaptation of the epithelial attachment and connective tissue compartment had already occurred. In fact, in a study on humans, Tomasi et al. retrieved biopsies around bone level implants and it was demonstrated that the thickness of the soft tissue barrier increased up to 3.6 mm until full tissue maturation, which occurred at 8 weeks from the abutment placement [35]. According to a recent meta-analysis, there are no relevant differences in bone loss between implants placed at subcrestal and equicrestal levels [36]. Likewise, the 1-year and 3-year outcomes of randomized clinical trials which compared implants placed 1.5 mm and 0.5 mm apical to the bone level, did not find any appreciable difference in marginal bone loss and clinical performance [25,37]. On the other hand, studies evaluating bone remodeling, rather than marginal bone loss, showed that implants placed subcrestally observed a greater extent of bone resorption during the first 12 month after prosthetic delivery [24,38]. Moreover, some clinical trials suggest that, in presence of thin supracrestal tissue, a subcrestal implant placement may reduce the probability for the implant to become exposed over time [39,40,41]. From the findings of the present study, it can be observed that at t1, the implant neck was located coronal to the marginal bone level only in very few cases. This indicates that the effect of the initial bone remodeling was limited. Such finding should be evaluated, since exposed treated surfaces may lead to plaque accumulation and inflammatory response, representing a potential factor for the onset of peri-implant inflammatory diseases [42]. Moreover, in the present report, a technical parameter, that is, the type of connection between the abutment and the fixture, was crucial for the achievement of clinical and radiographic outcomes during the entire follow-up period, as demonstrated in a recent meta-analysis concluding that crestal bone levels are better maintained in the short-medium term when implants with internal conical connections are used [43]. The multiple regression analysis performed in the present study aimed to identify the predictors for peri-implant bone loss. According to our findings, the most significant factors were implant vertical position and the presence of type-2 controlled diabetes. The MBL change was influenced by the initial vertical position of the implant at the time of prosthetic delivery. More in detail, the more apical the initial position of the implant, the greater the estimated bone loss value (Figure 2). This preliminary finding is of relevant clinical interest, since it would indicate which is the optimal position of the implant in relation to the marginal bone level. For implants placed 1 mm below the bone crest, no hard tissue remodeling was observed. For implants placed 2 or 3 mm below the bone level, a slight remodeling occurred, even though the implant neck was never exposed. It can be assumed that the conical connection as technical factor may help to achieve and maintain marginal bone level stability, but if the implant is placed too deeply in the bone, a bone remodeling will occur. This result is in agreement with a recent multicenter prospective clinical study showing a statistically significant positive correlation between the depth of implant insertion and early MBL [35]. Similarly, the present analysis suggested that the presence of type-2 controlled diabetes is also a predictor of bone loss. Such finding is in agreement with the current literature, since it has been established that implants in diabetic patients have a lower survival rate and a greater bone resorption than in non-diabetic patients [44,45]. However, the number of diabetic patients included in the present study (n = 4) was very low. The present results should be interpreted with caution, since a number of limitations are present. One limitation of this study was that the subgroups based on the follow-up were not equally distributed. The majority of included cases were analyzed after 2 years, and this might have influenced the overall results. Despite the promising outcomes on the peri-implant hard tissues’ stability, it can be concluded that more long-term data are required to confirm the clinical validity of implants placed at subcrestal level. Moreover, MBL was measured from the time of the definitive prosthetic delivery, while no information is available on the crestal alterations from the implant placement to the baseline. In this time frame, a number of different factors influence bone remodeling, including surgical trauma, biological width re-establishment, and number of abutment connection/disconnections. Another limitation is that the cases included in this analysis were restored with different kinds of prosthesis. Even though the influence of the type of rehabilitation on MBL change was not significant, a more comprehensive investigation on the prosthetic components is required in future studies. Finally, since only a single type of implant was selected in the analysis, the findings of the present study have to be interpreted cautiously when comparing different implant types. In fact, clinical and histological behavior of peri-implant hard and soft tissues in different implant platform surface configurations were studied by Monteiro et. al. [46]. Because marginal bone loss was less pronounced in roughened designs when compared to machined designs, it will be interesting to follow in time both machined and roughened implants with a 5° internal conical connection so that the real efficacy of such kinds of connections could be better understood. The effectiveness of a subcrestal implant placement has to be verified in long-term prospective clinical studies.

5. Conclusions

Within the limits of the present retrospective investigation, in a pool of subcrestally-placed implants, with 5 degree internal conical connection and a platform-switched abutment, MBL was stable. How a tight internal conical connection between abutment and implant may contribute to this clinical evidence should be more deeply investigated, due the fact that all implants had an internal connection. MBL change seems to be mostly influenced by the initial vertical position of the implant and the presence of type-2 controlled diabetes.

Author Contributions

D.L. and E.R. conceived the ideas; A.F., A.P. and J.M.J. collected the data; D.L. and M.S. analyzed the data; D.L. and M.S. led the writing; E.R, A.F., J.M.J. and A.P. led the review and editing of the paper, E.R. and J.M.J. led the supervision of the study. All authors gave final approval of the manuscript and agree to be accountable for all aspects of the work.

Funding

This research received no external funding.

Conflicts of Interest

The authors declare no conflict of interest.

References

  1. Jung, R.E.; Zembic, A.; Pjetursson, B.E.; Zwahlen, M.; Thoma, D.S. Systematic review of the survival rate and the incidence of biological, technical, and aesthetic complications of single crowns on implants reported in longitudinal studies with a mean follow-up of 5 years. Clin. Oral Implants Res. 2012, 23, 2–21. [Google Scholar] [CrossRef] [PubMed]
  2. Bragger, U.; Karoussis, I.; Persson, R.; Pjetursson, B.; Salvi, G.; Lang, N. Technical and biological complications/failures with single crowns and fixed partial dentures on implants: A 10-year prospective cohort study. Clin. Oral Implants Res. 2005, 16, 326–334. [Google Scholar] [CrossRef] [PubMed]
  3. Chrcanovic, B.R.; Kisch, J.; Albrektsson, T.; Wennerberg, A. Factors Influencing Early Dental Implant Failures. J. Dent. Res. 2016, 95, 995–1002. [Google Scholar] [CrossRef]
  4. Albrektsson, T.; Zarb, G.; Worthington, P.; Eriksson, A.R. The long-term efficacy of currently used dental implants: A review and proposed criteria of success. Int. J. Oral Maxillofac. Implants 1986, 1, 11–25. [Google Scholar]
  5. Adell, R.; Lekholm, U.; Rockler, B.; Branemark, P.I.; Lindhe, J.; Eriksson, B.; Sbordone, L. Marginal tissue reactions at osseointegrated titanium fixtures (I). A 3-year longitudinal prospective study. Int. J. Oral Maxillofac. Surg. 1986, 15, 39–52. [Google Scholar] [CrossRef]
  6. Albrektsson, T.; Canullo, L.; Cochran, D.; De Bruyn, H. “Peri-Implantitis”: A Complication of a Foreign Body or a Man-Made “Disease”. Facts and Fiction. Clin. Implant Dent. Relat. Res. 2016, 18, 840–849. [Google Scholar] [CrossRef] [PubMed]
  7. Laurell, L.; Lundgren, D. Marginal bone level changes at dental implants after 5 years in function: A meta-analysis. Clin. Implant Dent. Relat. Res. 2011, 13, 19–28. [Google Scholar] [CrossRef]
  8. Branemark, P.I.; Hansson, B.O.; Adell, R.; Breine, U.; Lindstrom, J.; Hallen, O.; Ohman, A. Osseointegrated implants in the treatment of the edentulous jaw. Experience from a 10-year period. Scand. J. Plast. Reconstr. Surg. Suppl. 1977, 16, 1–132. [Google Scholar] [PubMed]
  9. Hermann, F.; Lerner, H.; Palti, A. Factors influencing the preservation of the periimplant marginal bone. Implant Dent. 2007, 16, 165–175. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  10. Misch, C.E. Dental Implant Prosthetics-E-Book; Elsevier Health Sciences: Amsterdam, The Netherlands, 2004. [Google Scholar]
  11. Misch, C.E. Contemporary Implant Dentistry-E-Book; Elsevier Health Sciences: Amsterdam, The Netherlands, 2007. [Google Scholar]
  12. Canullo, L.; Pesce, P.; Patini, R.; Antonacci, D.; Tommasato, G. What Are the Effects of Different Abutment Morphologies on Peri-implant Hard and Soft Tissue Behavior? A Systematic Review and Meta-Analysis. Int. J. Prosthodont. 2020, 33, 297–306. [Google Scholar] [CrossRef] [PubMed]
  13. Canullo, L.; Fedele, G.R.; Iannello, G.; Jepsen, S. Platform switching and marginal bone-level alterations: The results of a randomized-controlled trial. Clin. Oral Implants Res. 2010, 21, 115–121. [Google Scholar] [CrossRef] [PubMed]
  14. Pieri, F.; Aldini, N.N.; Marchetti, C.; Corinaldesi, G. Influence of implant-abutment interface design on bone and soft tissue levels around immediately placed and restored single-tooth implants: A randomized controlled clinical trial. Int. J. Oral Maxillofac. Implants 2011, 26, 169–178. [Google Scholar] [PubMed]
  15. Schmitt, C.M.; Nogueira-Filho, G.; Tenenbaum, H.C.; Lai, J.Y.; Brito, C.; Doring, H.; Nonhoff, J. Performance of conical abutment (Morse Taper) connection implants: A systematic review. J. Biomed. Mater. Res. A 2014, 102, 552–574. [Google Scholar] [CrossRef] [PubMed]
  16. Ugurel, C.S.; Steiner, M.; Isik-Ozkol, G.; Kutay, O.; Kern, M. Mechanical resistance of screwless morse taper and screw-retained implant-abutment connections. Clin. Oral Implants Res. 2015, 26, 137–142. [Google Scholar] [CrossRef] [PubMed]
  17. Hansson, S. A conical implant-abutment interface at the level of the marginal bone improves the distribution of stresses in the supporting bone. An axisymmetric finite element analysis. Clin. Oral Implants Res. 2003, 14, 286–293. [Google Scholar] [CrossRef] [PubMed]
  18. Lazzara, R.J.; Porter, S.S. Platform switching: A new concept in implant dentistry for controlling postrestorative crestal bone levels. Int. J. Periodontics Restor. Dent. 2006, 26, 9–17. [Google Scholar]
  19. Luongo, R.; Traini, T.; Guidone, P.C.; Bianco, G.; Cocchetto, R.; Celletti, R. Hard and soft tissue responses to the platform-switching technique. Int. J. Periodontics Restor. Dent. 2008, 28, 551–557. [Google Scholar]
  20. Koutouzis, T.; Neiva, R.; Nonhoff, J.; Lundgren, T. Placement of implants with platform-switched Morse taper connections with the implant-abutment interface at different levels in relation to the alveolar crest: A short-term (1-year) randomized prospective controlled clinical trial. Int. J. Oral Maxillofac. Implants 2013, 28, 1553–1563. [Google Scholar] [CrossRef] [Green Version]
  21. Degidi, M.; Perrotti, V.; Shibli, J.A.; Novaes, A.B.; Piattelli, A.; Iezzi, G. Equicrestal and subcrestal dental implants: A histologic and histomorphometric evaluation of nine retrieved human implants. J. Periodontol. 2011, 82, 708–715. [Google Scholar] [CrossRef] [PubMed]
  22. Koutouzis, T.; Neiva, R.; Nair, M.; Nonhoff, J.; Lundgren, T. Cone beam computed tomographic evaluation of implants with platform-switched Morse taper connection with the implant-abutment interface at different levels in relation to the alveolar crest. Int. J. Oral Maxillofac. Implants 2014, 29, 1157–1163. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  23. Welander, M.; Abrahamsson, I.; Berglundh, T. Subcrestal placement of two-part implants. Clin. Oral Implants Res. 2009, 20, 226–231. [Google Scholar] [CrossRef] [PubMed]
  24. Froum, S.J.; Cho, S.C.; Suzuki, T.; Yu, P.; Corby, P.; Khouly, I. Epicrestal and subcrestal placement of platform-switched implants: 18 month-result of a randomized, controlled, split-mouth, prospective clinical trial. Clin. Oral Implants Res. 2018, 29, 353–366. [Google Scholar] [CrossRef] [PubMed]
  25. Gualini, F.; Salina, S.; Rigotti, F.; Mazzarini, C.; Longhin, D.; Grigoletto, M.; Trullenque-Eriksson, A.; Sbricoli, L.; Esposito, M. Subcrestal placement of dental implants with an internal conical connection of 0.5 mm versus 1.5 mm: Outcome of a multicentre randomised controlled trial 1 year after loading. Eur. J. Oral Implantol. 2017, 10, 73–82. [Google Scholar]
  26. Cosyn, J.; Eghbali, A.; De Bruyn, H.; Collys, K.; Cleymaet, R.; De Rouck, T. Immediate single-tooth implants in the anterior maxilla: 3-year results of a case series on hard and soft tissue response and aesthetics. J. Clin. Periodontol. 2011, 38, 746–753. [Google Scholar] [CrossRef] [PubMed]
  27. Lops, D.; Chiapasco, M.; Rossi, A.; Bressan, E.; Romeo, E. Incidence of inter-proximal papilla between a tooth and an adjacent immediate implant placed into a fresh extraction socket: 1-year prospective study. Clin. Oral Implants Res. 2008, 19, 1135–1140. [Google Scholar] [CrossRef]
  28. Galindo-Moreno, P.; Fernandez-Jimenez, A.; O’Valle, F.; Monje, A.; Silvestre, F.J.; Juodzbalys, G.; Sanchez-Fernandez, E.; Catena, A. Influence of the crown-implant connection on the preservation of peri-implant bone: A retrospective multifactorial analysis. Int. J. Oral Maxillofac. Implants 2015, 30, 384–390. [Google Scholar] [CrossRef] [Green Version]
  29. Lops, D.; Parpaiola, A.; Paniz, G.; Sbricoli, L.; Magaz, V.R.; Venezze, A.C.; Bressan, E.; Stellini, E. Interproximal Papilla Stability Around CAD/CAM and Stock Abutments in Anterior Regions: A 2-Year Prospective Multicenter Cohort Study. Int. J. Periodontics Restor. Dent. 2017, 37, 657–665. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  30. Lops, D.; Romeo, E.; Chiapasco, M.; Procopio, R.M.; Oteri, G. Behaviour of soft tissues healing around single bone-level-implants placed immediately after tooth extraction A 1 year prospective cohort study. Clin. Oral Implants Res. 2013, 24, 1206–1213. [Google Scholar] [CrossRef]
  31. Lang, N.P.; Berglundh, T. Periimplant diseases: Where are we now?--Consensus of the Seventh European Workshop on Periodontology. J. Clin. Periodontol. 2011, 38, 178–181. [Google Scholar] [CrossRef] [Green Version]
  32. Galindo-Moreno, P.; León-Cano, A.; Ortega-Oller, I.; Monje, A.; O’Valle, F.; Catena, A. Marginal bone loss as success criterion in implant dentistry: Beyond 2 mm. Clin. Oral Implants Res. 2015, 26, 28–34. [Google Scholar] [CrossRef]
  33. Spinato, S.; Stacchi, C.; Lombardi, T.; Bernardello, F.; Messina, M.; Zaffe, D. Biological width establishment around dental implants is influenced by abutment height irrespective of vertical mucosal thickness: A cluster randomized controlled trial. Clin. Oral Implants Res. 2019, 30, 649–659. [Google Scholar] [CrossRef] [PubMed]
  34. Lombardi, T.; Berton, F.; Salgarello, S.; Barbalonga, E.; Rapani, A.; Piovesana, F.; Gregorio, C.; Barbati, G.; Di Lenarda, R.; Stacchi, C. Factors Influencing Early Marginal Bone Loss around Dental Implants Positioned Subcrestally: A Multicenter Prospective Clinical Study. J. Clin. Med. 2019, 8, 1168. [Google Scholar] [CrossRef] [PubMed] [Green Version]
  35. Tomasi, C.; Tessarolo, F.; Caola, I.; Piccoli, F.; Wennstrom, J.L.; Nollo, G.; Berglundh, T. Early healing of peri-implant mucosa in man. J. Clin. Periodontol. 2016, 43, 816–824. [Google Scholar] [CrossRef]
  36. Palacios-Garzón, N.; Velasco-Ortega, E.; López-López, J. Bone Loss in Implants Placed at Subcrestal and Crestal Level: A Systematic Review and Meta-Analysis. Materials 2019, 12, 154. [Google Scholar] [CrossRef] [Green Version]
  37. Salina, S.; Gualini, F.; Rigotti, F.; Mazzarini, C.; Longhin, D.; Grigoletto, M.; Buti, J.; Sbricoli, L.; Esposito, M. Subcrestal placement of dental implants with an internal conical connection of 0.5 mm versus 1.5 mm: Three-year after loading results of a multicentre within-person randomised controlled trial. Int. J. Oral Implantol. 2019, 12, 155–167. [Google Scholar]
  38. Gatti, C.; Gatti, F.; Silvestri, M.; Mintrone, F.; Rossi, R.; Tridondani, G.; Piacentini, G.; Borrelli, P. A Prospective Multicenter Study on Radiographic Crestal Bone Changes Around Dental Implants Placed at Crestal or Subcrestal Level: One-Year Findings. Int. J. Oral Maxillofac. Implants 2018, 33, 913–918. [Google Scholar] [CrossRef]
  39. Linkevicius, T.; Puisys, A.; Linkevicius, R.; Alkimavicius, J.; Gineviciute, E.; Linkeviciene, L. The influence of submerged healing abutment or subcrestal implant placement on soft tissue thickness and crestal bone stability. A 2-year, randomized clinical trial. Clin. Implant Dent. Relat. Res. 2020, 6. [Google Scholar] [CrossRef]
  40. Vervaeke, S.; Matthys, C.; Nassar, R.; Christiaens, V.; Cosyn, J.; De Bruyn, H. Adapting the vertical position of implants with a conical connection in relation to soft tissue thickness prevents early implant surface exposure: A 2-year prospective intra-subject comparison. J. Clin. Periodontol. 2018, 45, 605–612. [Google Scholar] [CrossRef]
  41. Pico, A.; Martín-Lancharro, P.; Caneiro, L.; Nóvoa, L.; Batalla, P.; Blanco, J. Influence of abutment height and implant depth position on interproximal peri-implant bone in sites with thin mucosa: A 1-year randomized clinical trial. Clin. Oral Implants Res. 2019, 30, 595–602. [Google Scholar] [CrossRef]
  42. Wennerberg, A.; Sennerby, L.; Kultje, C.; Lekholm, U. Some soft tissue characteristics at implant abutments with different surface topography. A study in humans. J. Clin. Periodontol. 2003, 30, 88–94. [Google Scholar] [CrossRef]
  43. Caricasulo, R.; Malchiodi, L.; Ghensi, P.; Fantozzi, G.; Cucchi, A. The influence of implant-abutment connection to peri-implant bone loss: A systematic review and meta-analysis. Clin. Implant Dent. Relat. Res. 2018, 20, 653–664. [Google Scholar] [CrossRef] [PubMed]
  44. Chrcanovic, B.R.; Albrektsson, T.; Wennerberg, A. Diabetes and oral implant failure: A systematic review. J. Dent. Res. 2014, 93, 859–867. [Google Scholar] [CrossRef] [PubMed]
  45. Moraschini, V.; Barboza, E.S.; Peixoto, G.A. The impact of diabetes on dental implant failure: A systematic review and meta-analysis. Int. J. Oral Maxillofac. Surg. 2016, 45, 1237–1245. [Google Scholar] [CrossRef] [PubMed]
  46. Montero, J.; Fernandezruiz, A.; Pardalpelaez, B.; Jimenezguerra, A.; Velascoortega, E.; Nicolassilvente, A.I.; Monsalveguil, L. Effect of Rough Surface Platforms on the Mucosal Attachment and the Marginal Bone Loss of Implants: A Dog Study. Materials 2020, 13, 802. [Google Scholar] [CrossRef] [Green Version]
Materials 13 03123 g001 550
Figure 1. Schematic view of the implant system adopted in this study. Details of the 5 degree internal tapered IAI (implant abutment interface) are shown: the internal hexagon index was 2.3 mm wide, while the internal screw canal measured 1.8 × 3.5 mm.
Figure 1. Schematic view of the implant system adopted in this study. Details of the 5 degree internal tapered IAI (implant abutment interface) are shown: the internal hexagon index was 2.3 mm wide, while the internal screw canal measured 1.8 × 3.5 mm.
Materials 13 03123 g001
Materials 13 03123 g002 550
Figure 2. X-rays were taken at surgery, prosthetic delivery (baseline), and at the follow-up visit (t1). Measurements of marginal bone level (MBL) were taken for the mesial and the distal aspect of each implant.
Figure 2. X-rays were taken at surgery, prosthetic delivery (baseline), and at the follow-up visit (t1). Measurements of marginal bone level (MBL) were taken for the mesial and the distal aspect of each implant.
Materials 13 03123 g002
Materials 13 03123 g003 550
Figure 3. Cumulative percentage of MBL at baseline (t0) and after 2 years from loading.
Figure 3. Cumulative percentage of MBL at baseline (t0) and after 2 years from loading.
Materials 13 03123 g003
Materials 13 03123 g004 550
Figure 4. Estimated average MBL change according to MBL (t0). Results are in mm.
Figure 4. Estimated average MBL change according to MBL (t0). Results are in mm.
Materials 13 03123 g004
Table
Table 1. Frequency of implant length and implant diameter.
Table 1. Frequency of implant length and implant diameter.
Diameter (mm)Total
3.544.556.5
Length (mm)722781130
8.5413121232
10104539111106
11.511831023
1334836940190
1522340029
Total831541232624410
Table
Table 2. Frequency of implant distribution by jaw and site of placement.
Table 2. Frequency of implant distribution by jaw and site of placement.
AnteriorPosteriorTotal
Maxilla75156231
Mandible45134179
Total120290410
Table
Table 3. Frequency of prosthesis type and respective follow-up time. SC: Single Crown; FPD: Fixed partial denture; FFD: Fixed full denture; TO: Toronto bridge.
Table 3. Frequency of prosthesis type and respective follow-up time. SC: Single Crown; FPD: Fixed partial denture; FFD: Fixed full denture; TO: Toronto bridge.
Type of ProsthesisFollow-UpTotal
2 Years3 Years4 Years5 Years6 Years7 Years9 Years
SC2454110035
FPD5511141113196
FFD1002000012
TO1720101021
Total106182013241164
Table
Table 4. Mean marginal bone level (MBL) (mm) at implant insertion (t0) and at last follow-up visit (t1) and mean MBL change (mm) divided by time of follow-up. sd: Standard Deviation.
Table 4. Mean marginal bone level (MBL) (mm) at implant insertion (t0) and at last follow-up visit (t1) and mean MBL change (mm) divided by time of follow-up. sd: Standard Deviation.
Follow-upFrequencyMBL t0MBL t1MBL Change
MeansdMeansdMeansd
2 years280−1.090.37−0.850.29−0.240.41
3 years38−1.080.66−1.020.39−0.060.58
4 years50−0.771.32−1.360.190.591.28
5 years25−1.620.20−1.480.18−0.140.29
6 years3−1.470.29−1.300.17−0.170.12
7 years12−1.121.31−1.610.170.491.23
9 years2−2.100.14−1.950.07−0.150.21
Total410−1.090.65−1.000.37−0.090.68
Table
Table 5. Mean MBL change (mm) calculated for each patient based on clinical systemic conditions. “No” stands for healthy patients with no clinical condition. sd: Standard Deviation.
Table 5. Mean MBL change (mm) calculated for each patient based on clinical systemic conditions. “No” stands for healthy patients with no clinical condition. sd: Standard Deviation.
Clinical Conditions
No (n = 72)Smoke (n = 15)Diabetes (n = 4)Bisphosphonates (n = 2)p Value
MBL changeMean−0.13−0.14−0.421.300.031
sd0.490.140.251.98
Table
Table 6. MBL change 2 years vs. more than 2 years. sd: Standard Deviation.
Table 6. MBL change 2 years vs. more than 2 years. sd: Standard Deviation.
Vs. FollowupnMeansdp Value
MBL change2 years280−0.240.41p < 0.001
>2years1300.220.99
Table
Table 7. Multivariate linear regression analysis with MBL change as the dependent variable (surgery to 5 years) and time from prosthetic delivery (follow-up), the initial vertical position of the implant (MBL(t0)), and the presence of type-2 diabetes (diabetes) as predictors.
Table 7. Multivariate linear regression analysis with MBL change as the dependent variable (surgery to 5 years) and time from prosthetic delivery (follow-up), the initial vertical position of the implant (MBL(t0)), and the presence of type-2 diabetes (diabetes) as predictors.
PredictorsUnstandardized Coefficients (B)Standard Errort-Statisticsp-Value
Constant0.0620.0521.1950.233
Follow-up0.0860.0118.165<0.001
MBL(t0)0.3460.0497.126<0.001
Diabetes−0.2920.048−6.033<0.001
Table
Table 8. Estimated MBL change (mm) according to years of follow-up and presence of diabetes.
Table 8. Estimated MBL change (mm) according to years of follow-up and presence of diabetes.
PredictorMBL Change
Follow-up2 years, 3 years−0.43
4 years, 5 years, 6 years, 7 years, 9 years−0.21
Presence of diabetesyes−0.46
no−0.18

Share and Cite

MDPI and ACS Style

Lops, D.; Stocchero, M.; Motta Jones, J.; Freni, A.; Palazzolo, A.; Romeo, E. Five Degree Internal Conical Connection and Marginal Bone Stability around Subcrestal Implants: A Retrospective Analysis. Materials 2020, 13, 3123. https://doi.org/10.3390/ma13143123

AMA Style

Lops D, Stocchero M, Motta Jones J, Freni A, Palazzolo A, Romeo E. Five Degree Internal Conical Connection and Marginal Bone Stability around Subcrestal Implants: A Retrospective Analysis. Materials. 2020; 13(14):3123. https://doi.org/10.3390/ma13143123

Chicago/Turabian Style

Lops, Diego, Michele Stocchero, Jason Motta Jones, Alessandro Freni, Antonino Palazzolo, and Eugenio Romeo. 2020. "Five Degree Internal Conical Connection and Marginal Bone Stability around Subcrestal Implants: A Retrospective Analysis" Materials 13, no. 14: 3123. https://doi.org/10.3390/ma13143123

APA Style

Lops, D., Stocchero, M., Motta Jones, J., Freni, A., Palazzolo, A., & Romeo, E. (2020). Five Degree Internal Conical Connection and Marginal Bone Stability around Subcrestal Implants: A Retrospective Analysis. Materials, 13(14), 3123. https://doi.org/10.3390/ma13143123

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop