Separation of Water in Diesel Using Filter Media Containing Kapok Fibers

Traditional water-repellent filter media for water separation in diesel fail to meet requirements due to the high content of surfactants in low sulfur diesel and ULSD (ultra low sulfur diesel). To improve the water separation performance of filter media, a novel dual-layer filter medium was prepared by hydrophilic fibers (glass microfibers) and hydrophobic fibers (kapok fibers and bi-component PET fibers). The results showed that the separation efficiency of a filter medium (sample #2) with the upstream layer containing 20 wt% kapok fibers was 89.5%, which was higher than that of filter samples with the upstream layer containing 0 wt%, 40 wt%, 60 wt% and 80 wt% kapok fibers. When the interfacial tension (IFT) of water in diesel was 21 mN/m, 17 mN/m and 13 mN/m, the separation efficiency of filter sample #2 was 99.5%, 89.5% and 30.5%, respectively, which was 23.9%, 57.4% and 17.8% higher than that of the commercial water-repellent filter samples composed of a polybutylene terephthalate (PBT) fiber layer and cellulose fiber layer.