Next Article in Journal
β-Si3N4 Microcrystals Prepared by Carbothermal Reduction-Nitridation of Quartz
Previous Article in Journal
Enzymatically Functionalized Composite Materials Based on Nanocellulose and Poly(Vinyl Alcohol) Cryogel and Possessing Antimicrobial Activity
 
 
Article
Peer-Review Record

Determination of Strain Properties of the Leather Semi-Finished Product and Moisture-Removing Materials of Compression Rolls

Materials 2019, 12(21), 3620; https://doi.org/10.3390/ma12213620
by Auezhan Amanov 1,*, Gayrat Bahadirov 2, Tileubay Amanov 2, Gerasim Tsoy 2 and Ayder Nabiev 2
Reviewer 1:
Reviewer 2: Anonymous
Reviewer 3: Anonymous
Materials 2019, 12(21), 3620; https://doi.org/10.3390/ma12213620
Submission received: 13 September 2019 / Revised: 31 October 2019 / Accepted: 31 October 2019 / Published: 4 November 2019
(This article belongs to the Section Manufacturing Processes and Systems)

Round 1

Reviewer 1 Report

     In this paper, a device was designed and manufactured to measure the strain characteristics of the leather semi-finished product under load. 

The leather has a certain rebound after being compressed, so the author should give specific measurement methods and conditions for the thickness of the leather.  The author should verify the resulting formula. The stand showed in Figure 4 is not detailed enough to explain how to feed and wind the multiple skin sandwich. Line 294, "With an increase in the number of layers of a leather semi-finished Product with a monchon, the amount of moisture removed from the leather semi-finished product Reduced." The author does not need to explain common sense after the trial.

Author Response

Please see the attachment

Author Response File: Author Response.pdf

Reviewer 2 Report

The authors in their paper describe the determination of Strain Properties of the Leather Semi-finished Product and Moisture-removing Materials of Compression Rolls.

We believe this is a very interesting argument and approach to gain deeper insight into the mechanism of leather processing. The work is nicely done and in good agreement with the scope of Materials journal. In our opinion the work is publishable in its current form.

Author Response

Thank you for your invaluable comments and opinions.  We appreciate your time and effort to review the paper.

 

Reviewer 3 Report

In section 2. Experimental procedures and results, line 69 it should be explained better what means bifurcation (chrome tanning and bifurcation).

Author Response

In section 2. Experimental procedures and results, line 69 it should be explained better what means bifurcation (chrome tanning and bifurcation).

 

Response: Thank you for your comment. The following sentences have been added to the revised manuscript:

 

Chrome tanning is the process of treating skins to produce leather which uses a solution of chromium sulfate to tan the hide. In turn, bifurcation is the process of splitting of a one-piece leather into sections (see Fig. 1).

Back to TopTop