Next Article in Journal
Wood Biomass Ash (WBA) from the Heat Production Process as a Mineral Amendment for Improving Selected Soil Properties
Next Article in Special Issue
Characterizing the Wake Effects on Wind Power Generator Operation by Data-Driven Techniques
Previous Article in Journal
Investigation of Heat Transfer and Pressure Drop for R744 in a Horizontal Smooth Tube of R744/R404A Hybrid Cascade Refrigeration System—Part 2: Low-Temperature Region
Previous Article in Special Issue
Discussion on Incentive Compatibility of Multi-Period Temporal Locational Marginal Pricing
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Energies
Volume 16
Issue 13
10.3390/en16135109
energies-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Use of Park’s Vector Method for Monitoring the Rotor Condition of an Induction Motor as a Part of the Built-In Diagnostic System of Electric Drives of Transport

by
Oleg Gubarevych
1,
Juraj Gerlici
2,
Oleksandr Kravchenko
2,*,
Inna Melkonova
3 and
Olha Melnyk
4
1
Department of Electromechanics and Rolling Stock of Railways, Kyiv Institute of Railway Transport ofState University of Infrastructure and Technologies, 04071 Kyiv, Ukraine
2
Department of Transport and Handling Machines, Faculty of Mechanical Engineering, University of Zilina, 01026 Zilina, Slovakia
3
Department of Electrical Engineering, Volodymyr Dahl East Ukrainian National University, 91000 Kyiv, Ukraine
4
Department of Ship Power Units, Auxiliary Mechanisms of Ships and their Operation, Kyiv Institute of Water Transport of State University of Infrastructure and Technologies, 04071 Kyiv, Ukraine
*
Author to whom correspondence should be addressed.
Energies 2023, 16(13), 5109; https://doi.org/10.3390/en16135109
Submission received: 4 June 2023 / Revised: 26 June 2023 / Accepted: 30 June 2023 / Published: 2 July 2023
(This article belongs to the Special Issue Power System Analysis Control and Operation)
Browse Figures
Versions Notes

Abstract

The article is devoted to the use of Park’s vector method for operational control of the rotor condition of induction motors of traction and auxiliary drives of railway rolling stock. In the course of the analysis, it was established that in order to increase the reliability and efficiency of the operation of vehicles, it is necessary to improve and implement diagnostic systems for monitoring the current state of the most damaged elements of induction electric motors built into the drive. This paper presents the development of a new approach to monitoring the state of a squirrel-cage rotor, which is based on the use of Park’s vector approach. In the course of the research, the issue of taking into account the asymmetric power supply of the engine during the diagnostic period during industrial operation was solved, which affects the accuracy of determining the degree of damage to the rotor. On the basis of the conducted research, the algorithm of the module for diagnosing the state of the squirrel-cage rotor of an induction motor has been developed for practical use in the built-in on-board systems of vehicles, which allows us to determine the degree of damage and monitor the development of the rotor defect during operation, including in automated mode.
Keywords: induction motor; fault detection; Park’s vector approach; rotor diagnostics; transport equipment monitoring; on-board diagnostic system induction motor; fault detection; Park’s vector approach; rotor diagnostics; transport equipment monitoring; on-board diagnostic system

Share and Cite

MDPI and ACS Style

Gubarevych, O.; Gerlici, J.; Kravchenko, O.; Melkonova, I.; Melnyk, O. Use of Park’s Vector Method for Monitoring the Rotor Condition of an Induction Motor as a Part of the Built-In Diagnostic System of Electric Drives of Transport. Energies 2023, 16, 5109. https://doi.org/10.3390/en16135109

AMA Style

Gubarevych O, Gerlici J, Kravchenko O, Melkonova I, Melnyk O. Use of Park’s Vector Method for Monitoring the Rotor Condition of an Induction Motor as a Part of the Built-In Diagnostic System of Electric Drives of Transport. Energies. 2023; 16(13):5109. https://doi.org/10.3390/en16135109

Chicago/Turabian Style

Gubarevych, Oleg, Juraj Gerlici, Oleksandr Kravchenko, Inna Melkonova, and Olha Melnyk. 2023. "Use of Park’s Vector Method for Monitoring the Rotor Condition of an Induction Motor as a Part of the Built-In Diagnostic System of Electric Drives of Transport" Energies 16, no. 13: 5109. https://doi.org/10.3390/en16135109

APA Style

Gubarevych, O., Gerlici, J., Kravchenko, O., Melkonova, I., & Melnyk, O. (2023). Use of Park’s Vector Method for Monitoring the Rotor Condition of an Induction Motor as a Part of the Built-In Diagnostic System of Electric Drives of Transport. Energies, 16(13), 5109. https://doi.org/10.3390/en16135109

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop