Quasi-Boundary Method for Design Consideration of Resonant DC-DC Converters

The paper presents a new unified method for designing the two basic types of serial resonant DC-DC converters (series and with a parallel-loaded capacitor). The method is based on the use of a simplified generalized approach for the analysis of this type of power electronic devices. It is characterized by the fact that regardless of the specific operating mode, with a control frequency below or above the resonant of the series resonant circuit to determine the relationship between input and output voltage or current, it is assumed that the converter operates in resonance. In this sense, it is called a quasi-boundary method for analysis and design. The use of the quasi-boundary method significantly accelerates and facilitates the design of the considered power circuits, which is very useful for the purposes of engineering practice, as well as in the training of power electronics. The applicability of this approach is proven by the methods of mathematical modeling and computer simulations.