Influence of Raw Material Drying Temperature on the Scots Pine (Pinus sylvestris L.) Biomass Agglomeration Process—A Preliminary Study

For biomass compaction, it is important to determine all aspects of the process that will affect the quality of pellets and briquettes. The low bulk density of biomass leads to many problems in transportation and storage, necessitating the use of a compaction process to ensure a solid density of at least 1000 kg·m⁻³ and bulk density of at least 600 kg·m⁻³. These parameters should be achieved at a relatively low compaction pressure that can be achieved through the proper preparation of the raw material. As the compaction process includes a drying stage, the aim of this work is to determine the influence of the drying temperature of pine biomass in the range of 60–140 °C on the compaction process. To determine whether this effect is compensated by the moisture, compaction was carried out on the material in a dry state and on the materials with moisture contents of 5% and 10% and for compacting pressures in the 130.8–457.8 MPa range. It was shown that drying temperature affects the specific density and mechanical durability of the pellets obtained from the raw material in the dry state, while an increase in the moisture content of the raw material neutralizes this effect.