Next Article in Journal
Multifunctional Scatterometer System for Measuring Physical Oceanographic Parameters Using Range-Doppler FMCW Radar
Previous Article in Journal
Heart Rate Variability from Wearable Photoplethysmography Systems: Implications in Sleep Studies at High Altitude
 
 
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Article

Cost-Effective Bull’s Eye Aperture-Style Multi-Band Metamaterial Absorber at Sub-THz Band: Design, Numerical Analysis, and Physical Interpretation

by
Zohreh Vafapour
1,2
1
Department of Electrical and Computer Engineering, Queen’s University, Kingston, ON K7L 3N6, Canada
2
Department of Physics, School of Natural Sciences, University of California Merced, Merced, CA 95343, USA
Sensors 2022, 22(8), 2892; https://doi.org/10.3390/s22082892
Submission received: 17 March 2022 / Revised: 4 April 2022 / Accepted: 5 April 2022 / Published: 9 April 2022
(This article belongs to the Section Optical Sensors)

Abstract

Theoretical and numerical studies were conducted on plasmonic interactions at a polarization-independent semiconductor–dielectric–semiconductor (SDS) sandwiched layer design and a brief review of the basic theory model was presented. The potential of bull’s eye aperture (BEA) structures as device elements has been well recognized in multi-band structures. In addition, the sub-terahertz (THz) band (below 1 THz frequency regime) is utilized in communications and sensing applications, which are in high demand in modern technology. Therefore, we produced theoretical and numerical studies for a THz-absorbing-metasurface BEA-style design, with N-beam absorption peaks at a sub-THz band, using economical and commercially accessible materials, which have a low cost and an easy fabrication process. Furthermore, we applied the Drude model for the dielectric function of semiconductors due to its ability to describe both free-electron and bound systems simultaneously. Associated with metasurface research and applications, it is essential to facilitate metasurface designs to be of the utmost flexible properties with low cost. Through the aid of electromagnetic (EM) coupling using multiple semiconductor ring resonators (RRs), we could tune the number of absorption peaks between the 0.1 and 1.0 THz frequency regime. By increasing the number of semiconductor rings without altering all other parameters, we found a translation trend of the absorption frequencies. In addition, we validated our spectral response results using EM field distributions and surface currents. Here, we mainly discuss the source of the N-band THz absorber and the underlying physics of the multi-beam absorber designed structures. The proposed microstructure has ultra-high potentials to utilize in high-power THz sources and optical biomedical sensing and detection applications based on opto-electronics technology based on having multi-band absorption responses.
Keywords: sensors; metasurface; high-power THz sources; semiconductor device; THz absorber; cost-effective optical absorber; ultra-narrow N-beam absorber; multi-band structures sensors; metasurface; high-power THz sources; semiconductor device; THz absorber; cost-effective optical absorber; ultra-narrow N-beam absorber; multi-band structures

Share and Cite

MDPI and ACS Style

Vafapour, Z. Cost-Effective Bull’s Eye Aperture-Style Multi-Band Metamaterial Absorber at Sub-THz Band: Design, Numerical Analysis, and Physical Interpretation. Sensors 2022, 22, 2892. https://doi.org/10.3390/s22082892

AMA Style

Vafapour Z. Cost-Effective Bull’s Eye Aperture-Style Multi-Band Metamaterial Absorber at Sub-THz Band: Design, Numerical Analysis, and Physical Interpretation. Sensors. 2022; 22(8):2892. https://doi.org/10.3390/s22082892

Chicago/Turabian Style

Vafapour, Zohreh. 2022. "Cost-Effective Bull’s Eye Aperture-Style Multi-Band Metamaterial Absorber at Sub-THz Band: Design, Numerical Analysis, and Physical Interpretation" Sensors 22, no. 8: 2892. https://doi.org/10.3390/s22082892

APA Style

Vafapour, Z. (2022). Cost-Effective Bull’s Eye Aperture-Style Multi-Band Metamaterial Absorber at Sub-THz Band: Design, Numerical Analysis, and Physical Interpretation. Sensors, 22(8), 2892. https://doi.org/10.3390/s22082892

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop