Next Article in Journal
Influences of Probe’s Morphology for Metal Ion Detection Based on Light-Addressable Potentiometric Sensors
Previous Article in Journal
Measurement of Moisture in Wood for Application in the Restoration of Old Buildings
 
 
Search for Articles:
Title / Keyword
Author / Affiliation / Email
Journal
Article Type
 
 
Advanced Search
 
Section
Special Issue
Volume
Issue
Number
Page
 
Journals
Sensors
Volume 16
Issue 5
10.3390/s16050698
sensors-logo
Submit to this Journal Review for this Journal Propose a Special Issue
► Article Menu

Article Menu

share Share announcement Help format_quote Cite question_answer Discuss in SciProfiles thumb_up
...
Endorse textsms
...
Comment
Erratum to Sensors 2015, 15(4), 8512-8526.
first_page
settings
Order Article Reprints
Font Type:
Arial Georgia Verdana
Font Size:
Aa Aa Aa
Line Spacing:
Column Width:
Background:
Erratum

Erratum: Sutapun, B. et al. Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses. Sensors, 2015, 15, 8512-8526

by
Boonsong Sutapun
1,*,
Armote Somboonkaew
2,
Ratthasart Amarit
2 and
Sataporn Chanhorm
2
1
School of Electronic Engineering, Institute of Engineering, Suranaree University of Technology, 111 University Ave., Muang, Nakhon Ratchasima 30000, Thailand
2
Photonics Technology Laboratory, National Electronics and Computer Technology Center (NECTEC), National Science and Technology Development Agency (NSTDA), 112 Thailand Science Park, Pahol Yothin Rd., Klong Luang, Pathumthani 12120, Thailand
*
Author to whom correspondence should be addressed.
Sensors 2016, 16(5), 698; https://doi.org/10.3390/s16050698
Submission received: 11 May 2016 / Revised: 11 May 2016 / Accepted: 12 May 2016 / Published: 14 May 2016
Versions Notes
The source of the funding of this work disclosed on the published paper [1] was incorrect. The authors would like to correct the acknowledgements of this article as follows:
Acknowledgments: This work was funded by Suranaree University of Technology’s research and development fund.
The authors would like to apologize for any inconvenience this may have caused to the readers.

References

  1. Sutapun, B.; Somboonkaew, A.; Amarit, R.; Chanhorm, S. Development and beam-shape analysis of an integrated fiber-optic confocal probe for high-precision central thickness measurement of small-radius lenses. Sensors 2015, 15, 8512–8526. [Google Scholar] [CrossRef] [PubMed]

Share and Cite

MDPI and ACS Style

Sutapun, B.; Somboonkaew, A.; Amarit, R.; Chanhorm, S. Erratum: Sutapun, B. et al. Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses. Sensors, 2015, 15, 8512-8526. Sensors 2016, 16, 698. https://doi.org/10.3390/s16050698

AMA Style

Sutapun B, Somboonkaew A, Amarit R, Chanhorm S. Erratum: Sutapun, B. et al. Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses. Sensors, 2015, 15, 8512-8526. Sensors. 2016; 16(5):698. https://doi.org/10.3390/s16050698

Chicago/Turabian Style

Sutapun, Boonsong, Armote Somboonkaew, Ratthasart Amarit, and Sataporn Chanhorm. 2016. "Erratum: Sutapun, B. et al. Development and Beam-Shape Analysis of an Integrated Fiber-Optic Confocal Probe for High-Precision Central Thickness Measurement of Small-Radius Lenses. Sensors, 2015, 15, 8512-8526" Sensors 16, no. 5: 698. https://doi.org/10.3390/s16050698

Note that from the first issue of 2016, this journal uses article numbers instead of page numbers. See further details here.

Article Metrics

Back to TopTop