Frequency Seismic Response for EEWS Testing on Uniaxial Shaking Table

Earthquake early warning systems are used as important tools in earthquake risk management, providing timely information to residents and both public and private emergency managers. By doing this, the potential impact of large magnitude seismic events is significantly reduced. These systems use seismic sensors in order to acquire real-time data for the weaker but fast moving P wave (usually the first 3–5 s of the earthquake) and specific algorithms to predict the magnitude and the arrival time of the slower but more destructive surface waves. Most of these projection algorithms make use only of the vertical component of the acceleration and need extensive training in earthquake simulators in order to enhance their performance. Therefore, a low-inertial-mass uniaxial shaking table is proposed and analyzed in terms of frequency response in this paper, providing an effective cost/control ratio and high daily duty cycle. Furthermore, with the large variety of prediction algorithms, which use different frequency ranges, a new concept of selective frequency band error is also introduced and discussed in this paper as being a necessary tool for the final assessment of magnitude estimation algorithm error.