Search Results (7)

Developing a biomolecular detection method that minimizes photodamage while preserving an environment suitable for biological constituents to maintain their physiological state is expected to drive new diagnostic and mechanistic breakthroughs. In addition, ultra-sensitive diagnostic platforms are needed for rapid and point-of-care technologies for various diseases. Considering this, surface-enhanced Raman scattering (SERS) is proposed as a non-destructive and sensitive approach to address the limitations of fluorescence, electrochemical, and other optical detection techniques. However, to advance the applications of SERS, novel approaches that can enhance the signal of substrate materials are needed to improve reproducibility and costs associated with manufacture and scale-up. Due to their physical properties and synthesis, semiconductor-based nanostructures have gained increasing recognition as SERS substrates; however, low signal enhancements have offset their widespread adoption. To address this limitation and assess the potential for use in biological applications, zinc oxide (ZnO) was coated with different concentrations (0.01–0.1 M) of gold (Au) precursor. When crystal violet (CV) was used as a model target with the synthesized substrates, the highest enhancement was obtained with ZnO coated with 0.05 M Au precursor. This substrate was subsequently applied to differentiate exosomes derived from three cell types to provide insight into their molecular diversity. We anticipate this work will serve as a platform for colloidal hybrid SERS substrates in future bio-sensing applications. Full article

Surface-enhanced Raman spectroscopy (SERS) applications in clinical diagnosis and spectral pathology are increasing due to the potential of the technique to bio-barcode incipient and differential diseases via real-time monitoring of biomarkers in fluids and in real-time via biomolecular fingerprinting. Additionally, the rapid advancements in micro/nanotechnology have a visible influence in all aspects of science and life. The miniaturization and enhanced properties of materials at the micro/nanoscale transcended the confines of the laboratory and are revolutionizing domains such as electronics, optics, medicine, and environmental science. The societal and technological impact of SERS biosensing by using semiconductor-based nanostructured smart substrates will be huge once minor technical pitfalls are solved. Herein, challenges in clinical routine testing are addressed in order to understand the context of how SERS can perform in real, in vivo sampling and bioassays for early neurodegenerative disease (ND) diagnosis. The main interest in translating SERS into clinical practice is reinforced by the practical advantages: portability of the designed setups, versatility in using nanomaterials of various matter and costs, readiness, and reliability. As we will present in this review, in the frame of technology readiness levels (TRL), the current maturity reached by semiconductor-based SERS biosensors, in particular that of zinc oxide (ZnO)-based hybrid SERS substrates, is situated at the development level TRL 6 (out of 9 levels). Three-dimensional, multilayered SERS substrates that provide additional plasmonic hot spots in the z-axis are of key importance in designing highly performant SERS biosensors for the detection of ND biomarkers. Full article

The wide application of surface-enhanced Raman spectroscopy (SERS) is based on adaptable substrates, which are primarily limited to rough precious metals and colloidal nanoparticle materials. A novel method to enhance surface Raman scattering is present. This technique is reliant on the local surface plasmon resonance phenomena, in which incident light can be coupled to the plasma at the interface, resulting in a strong electric field. The field can propagate from the surface of the metal–dielectric interface, so adjacent molecules will experience more intense Raman scattering. The physical enhancement method was adopted; silver is deposited on the surface of different pH rough zinc oxide thin film, deposited by hydrothermal methods using the above principle, considerably improving the surface Raman scattering signal. Comparing the enhancement effects of zinc oxide substrates prepared in different pH environments on the Raman effect, the optimal acid–base environment was found, and the corresponding enhancement factors were calculated. Full article

Long-term exposure to nicotine causes a variety of human diseases, such as lung damage/adenocarcinoma, nausea and vomiting, headache, incontinence and heart failure. In this work, as a surface-enhanced Raman scattering (SERS) substrate, zinc oxide (ZnO) tips decorated with gold nanoparticles (AuNPs) are fabricated and designated as ZnO/Au. Taking advantage of the synergistic effect of a ZnO semiconductor with morphology of tips and AuNPs, the ZnO/Au-based SERS assay for nicotine demonstrates high sensitivity and the limit of detection 8.9 × 10⁻¹² mol/L is reached, as well as the corresponding linear dynamic detection range of 10⁻¹⁰–10⁻⁶ mol/L. Additionally, the signal reproducibility offered by the SERS substrate could realize the reliable determination of trace nicotine in saliva. Full article

An explosion in the production of substrates for surface enhanced Raman scattering (SERS) has occurred using novel designs of plasmonic nanostructures (e.g., nanoparticle self-assembly), new plasmonic materials such as bimetallic nanomaterials (e.g., Au/Ag) and hybrid nanomaterials (e.g., metal/semiconductor), and new non-plasmonic nanomaterials. The novel plasmonic nanomaterials can enable a better charge transfer or a better confinement of the electric field inducing a SERS enhancement by adjusting, for instance, the size, shape, spatial organization, nanoparticle self-assembly, and nature of nanomaterials. The new non-plasmonic nanomaterials can favor a better charge transfer caused by atom defects, thus inducing a SERS enhancement. In last two years (2019–2020), great insights in the fields of design of plasmonic nanosystems based on the nanoparticle self-assembly and new plasmonic and non-plasmonic nanomaterials were realized. This mini-review is focused on the nanoparticle self-assembly, bimetallic nanoparticles, nanomaterials based on metal-zinc oxide, and other nanomaterials based on metal oxides and metal oxide-metal for SERS sensing. Full article

Surface-enhanced Raman scattering (SERS) sensors are very powerful analytical tools for the highly sensitive detection of chemical and biological molecules. Substantial efforts have been devoted to the design of a great number of hybrid SERS substrates such as silicon or zinc oxide nanosystems coated with gold/silver nanoparticles. By comparison with the SERS sensors based on Au and Ag nanoparticles/nanostructures, higher enhancement factors and excellent reproducibilities are achieved with hybrid SERS nanosensors. This enhancement can be due to the appearance of hotspots located at the interface between the metal (Au/Ag) and the semiconducting substrates. Thus, in this last decade, great advances in the domain of hybrid SERS nanosensors have occurred. In this short review, the recent advances of these hybrid metal-coated semiconducting nanostructures as SERS sensors of chemical and biological molecules are presented. Full article

In the present study, zinc oxide (ZnO) nanorods (NRs) with a hexagonal structure have been synthesized via a hydrothermal method assisted by microwave radiation, using specialized cardboard materials as substrates. Cardboard-type substrates are cost-efficient and robust paper-based platforms that can be integrated into several opto-electronic applications for medical diagnostics, analysis and/or quality control devices. This class of substrates also enables highly-sensitive Raman molecular detection, amiable to several different operational environments and target surfaces. The structural characterization of the ZnO NR arrays has been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM) and optical measurements. The effects of the synthesis time (5–30 min) and temperature (70–130 °C) of the ZnO NR arrays decorated with silver nanoparticles (AgNPs) have been investigated in view of their application for surface-enhanced Raman scattering (SERS) molecular detection. The size and density of the ZnO NRs, as well as those of the AgNPs, are shown to play a central role in the final SERS response. A Raman enhancement factor of 7 × 10⁵ was obtained using rhodamine 6 G (R6G) as the test analyte; a ZnO NR array was produced for only 5 min at 70 °C. This condition presents higher ZnO NR and AgNP densities, thereby increasing the total number of plasmonic “hot-spots”, their volume coverage and the number of analyte molecules that are subject to enhanced sensing. Full article