Search Results (48)

Autonomous vehicles (AVs) have emerged as a promising sustainable urban mobility solution, expected to lead to enhanced road safety, smoother traffic flows, less traffic congestion, improved accessibility, better energy utilization and environmental performance, as well as more efficient passenger and freight transportation, in terms of time and cost, due to better fleet management and platooning. However, challenges also arise, mostly related to data privacy, security and cyber-security, high acquisition and infrastructure costs, accident liability, even possible increased traffic congestion and air pollution due to induced travel demand. This paper presents the results of a survey conducted among 654 residents who experienced an autonomous bus (AB) service in the city of Trikala, Greece, in order to assess their willingness to use (WTU) and willingness to pay (WTP) for ABs, through testing a range of factors based on a literature review. Results useful to policy-makers were extracted, such as that the intention to use ABs was mostly shaped by psychological factors (e.g., users’ perceptions of usefulness and safety, and trust in the service provider), while WTU seemed to be positively affected by previous experience in using ABs. In contrast, sociodemographic factors were found to have very little effect on the intention to use ABs, while apart from personal utility, users’ perceptions of how autonomous driving will improve the overall life standards in the study area also mattered. Full article

With the rapid acceleration of global urbanization and the advent of smart city initiatives, large metropolises confront the dual challenges of surging logistics demand and constrained surface transportation resources. Traditional surface logistics networks struggle to support sustainable urban development in high-density areas due to traffic congestion, high carbon emissions, and inefficient last-mile delivery. This paper addresses the layout optimization of a hub-and-spoke underground space logistics system (ULS) network for smart cities under stochastic scenarios by proposing an immune-inspired multi-objective particle swarm optimization (IS-MPSO) algorithm. By integrating a stochastic robust Capacity–Location–Allocation–Routing (CLAR) model, the approach concurrently minimizes construction costs, maximizes operational efficiency, and enhances underground corridor load rates while embedding probability density functions to capture multidimensional uncertainty parameters. Case studies in Beijing’s Fifth Ring area demonstrate that the IS-MPSO algorithm reduces the total objective function value from 9.8 million to 3.4 million within 500 iterations, achieving stable convergence in an average of 280 iterations. The optimized ULS network adopts a “ring–synapse” topology, elevating the underground corridor load rate to 59% and achieving a road freight alleviation rate (RFAR) of 98.1%, thereby shortening the last-mile delivery distance to 1.1 km. This research offers a decision-making paradigm that balances economic efficiency and robustness for the planning of underground logistics space in smart cities, contributing to the sustainable urban development of high-density regions and validating the algorithm’s effectiveness in large-scale combinatorial optimization problems. Full article

The expected growth of electric vehicle (EV) usage will not only increase the energy demand but also bring the requirement to provide the necessary electrical infrastructure to handle the load. While charging infrastructure is becoming increasingly present in urban areas, special attention is required for transit traffic, not just for passengers but also for freight transport. Differences in the nature of battery charging compared to that of classical refueling require careful planning in order to provide a resilient electrical infrastructure that will supply enough energy at critical locations during peak hours. This paper presents a hybrid simulation model for analyzing fast-charging demand based on traffic flow, projected EV adoption, battery characteristics, and environmental conditions. The model integrates a probabilistic model for evaluating the charging requirements based on traffic flows with a discrete-event simulation (DES) framework to analyze charger utilization, waiting queues, and energy demand. The presented case of traffic flow on Slovenian motorways explored the expected power demands at various seasonal traffic intensities. The findings provide valuable insight for planning the charging infrastructure, the electrical grid, and also the layout by anticipating the number of vehicles seeking charging services. The modular design of the model allowed replacing key parameters with different traffic projections, supporting a robust scenario analysis and adaptive infrastructure planning. Replacing the parameters with real-time data opens the path for integration into a digital twin framework of individual EV charging hubs, providing the basis for development of an EV charging hub network digital twin. Full article

Urban freight transportation is facing significant challenges due to increasing demand, driven by globalization, e-commerce growth, and the adoption of just-in-time logistics. These trends have led to rising vehicle flows in urban areas, negatively impacting sustainability, economic efficiency, and road safety. In response, cities are exploring innovative last-mile delivery strategies that emphasize sustainability, flexibility, and cost efficiency. Among these strategies, cargo bikes—particularly electric cargo bikes (e-cargo bikes)—are emerging as promising low-emission solutions for urban freight distribution. However, despite their potential, a generalized methodology for estimating their demand share in urban contexts remains underdeveloped. This study proposes a comprehensive modelling framework to evaluate the freight demand share that can be addressed by e-cargo bikes, integrating quantity, restocking service, modal, and delivery sub-models, calibrated using data from a case study in Italy. The results demonstrate that e-cargo bikes could fulfil up to 20% of urban freight demand, depending on the category of goods transported, and underscore the feasibility of integrating e-cargo bikes into urban logistics systems. However, critical challenges related to scalability and cost-effectiveness persist, highlighting the need for further research and reliable cost data to support broader implementation. Full article

The integration of postal and passenger transport is an effective measure to enhance the utilization efficiency of passenger and freight transportation resources and to promote the sustainable development of urban–rural transit and logistics. This paper considers the uncertainty in passenger and freight demand as well as transit operation times, constructing an optimization model for integrated urban–rural transit and postal services based on uncertainty theory. Passenger and freight demand, along with the inverse uncertain distribution of events, serve as constraints, while minimizing passenger travel time and the cost for passenger transport companies are the optimization objectives. Taking into account the uncertainty of urban–rural bus travel time, the scheduling model is transformed into a robust form for scenarios involving single and multiple origin stations. The model is solved using an improved NSGA-II (Nondominated Sorting Genetic Algorithm II) to achieve effective coordinated scheduling of both passenger and freight services. Through a case study in Lotus County, Jiangxi Province, vehicle routing plans with varying levels of conservativeness were obtained. Comparing the results from different scenarios, it was found that when the total vehicle operating mileage increased from 1.96% to 62.26%, passenger transport costs rose from 2.95% to 62.66%, while the total passenger travel time decreased from 55.99% to 172.31%. In terms of optimizing costs and improving passenger travel efficiency, operations involving multiple starting stations for a single vehicle demonstrated greater advantages. Meanwhile, at a moderate level of robustness, it was easier to achieve a balance between operational costs and passenger travel time. The research findings provide theoretical support for improving travel conditions and resource utilization in rural areas, which not only helps enhance the operational efficiency of urban–rural transit but also contributes positively to promoting balanced urban–rural sustainable development and narrowing the urban–rural gap. Full article

The growth of urbanization, population, and economic activity has led to a substantial increase in freight transportation demand, exceeding the capacity of existing infrastructure and creating new challenges across various regions. This has resulted in significant traffic congestion, increased travel times, and higher operational costs for commercial vehicle fleets. Leveraging topological data, such as road networks and traffic patterns, can enable more efficient routing strategies to navigate around congested areas. This study presents a comprehensive approach to truck rerouting strategy by integrating spatial analysis, truck characteristics, traffic conditions, road geometry, and cost–benefit analysis to select alternative routes suitable for commercial vehicle fleets. Incorporating real-time traffic information and predictive analytics, commercial vehicle operators can optimize their routes, reduce fuel consumption, and improve overall delivery efficiency. Three case studies were presented to demonstrate the proposed diversion decision framework. Two scenarios were designed for each case study: a base scenario with no diversion and an optimized scenario with a diversion strategy. The travel times, fuel consumption, and economic impacts between the two scenarios were compared and quantified as a total annual saving of USD 52 million. This approach goes beyond selecting alternative routes and provides decision makers with measurable benefits that justify diversion strategies. Full article

City manufacturing has once again become one of the priority areas for the sustainable development of smart cities thanks to the use of a wide range of green technologies and, first of all, additive technologies. Shortening the supply chain between producers and consumers has significant effects on economic, social, and environmental dimensions. Zoning of city multifloor manufacturing (CMFM) in areas with a compact population in large cities in the form of clusters with their own city logistics nodes (CLNs) creates favorable conditions for promptly meeting the needs of citizens for goods of everyday demand and for passenger and freight transportation. City multifloor manufacturing clusters (CMFMCs) have been already studied quite a lot for their possible uses; nevertheless, an identified research gap is related to supply chain design efficiency concerning CMFMCs. Thus, the main objective of this study was to explore the possibilities of lean supply chain management (LSCM) as the integrated application of lean manufacturing (LM) approaches and I4.0 technologies for customer-centric value stream management based on eliminating all types of waste, reducing the use of natural and energy resources, and continuous improvement of processes related to logistics activities. This paper presents a decision support model for LSCM in CMFMCs, which is a mathematical deterministic model. This model justifies the minimization of the number of road transport transfers within the urban area and the amount of stock that is stored in CMFMC buildings and in CLNs, and also regulating supplier lead time. The model was verified and validated using appropriately selected test data based on the case study, which was designed as a typical CMFM manufacturing system with various parameters of CMFMCs and urban freight transport frameworks. The feasibility of using the proposed model for value stream mapping (VSM) and managing logistics processes and inventories in clusters is discussed. The findings can help decisionmakers and researchers improve the planning and management of logistics processes and inventory in clusters, even in the face of unexpected disruptions. Full article

Estimating origin-destination (OD) demand is integral to urban, regional, and national freight transportation planning and modeling systems. However, in developing countries, existing studies reveal significant inconsistencies between OD estimates for domestic and import/export commodities derived from interregional input-output (IO) tables and those from regional IO tables. These discrepancies create a significant challenge for properly forecasting the freight demand of regional/interregional multimodal transportation networks. To this end, this study proposes a novel integrated framework for estimating regional and international (import/export) OD freight flows for a set of key commodities that dominate long-distance transportation. The framework leverages multisource data and follows a three-step process. First, a spatial economic model, PECAS activity allocation, is developed to estimate freight OD demand within a specific region. Second, the international (import and export) freight OD is estimated from different zones to foreign countries, including major import and export nodes such as international seaports, using a gravity model with the zone-pair friction obtained from a multimodal transportation model. Third, the OD matrices are converted from monetary value to tonnage and assigned to the multimodal transportation super network using the incremental freight assignment method. The model is calibrated using traffic counts of the highways, railways, and port throughput data. The proposed framework is tested through a case study of the Province of Jiangxi, which is crucial for forecasting freight demand before the planning, design, and operation of the Ganyue Canal. The predictive analytics of the proposed framework demonstrated high validity, where the goodness-of-fit (R²) between the observed and estimated freight flows on specific links for each of the three transport modes was higher than 0.9. This indirectly confirms the efficacy of the model in predicting freight OD demands. The proposed framework is adaptable to other regions and aids practitioners in providing a comprehensive tool for informed decision-making in freight demand modeling. Full article

The incorporation of Artificial Intelligence (AI) models into various optimization systems is on the rise. However, addressing complex urban and environmental management challenges often demands deep expertise in domain science and informatics. This expertise is essential for deriving data and simulation-driven insights that support informed decision-making. In this context, we investigate the potential of leveraging the pre-trained Large Language Models (LLMs) to create knowledge representations for supporting operations research. By adopting ChatGPT-4 API as the reasoning core, we outline an applied workflow that encompasses natural language processing, Methontology-based prompt tuning, and Generative Pre-trained Transformer (GPT), to automate the construction of scenario-based ontologies using existing research articles and technical manuals of urban datasets and simulations. From these ontologies, knowledge graphs can be derived using widely adopted formats and protocols, guiding various tasks towards data-informed decision support. The performance of our methodology is evaluated through a comparative analysis that contrasts our AI-generated ontology with the widely recognized pizza ontology, commonly used in tutorials for popular ontology software. We conclude with a real-world case study on optimizing the complex system of multi-modal freight transportation. Our approach advances urban decision support systems by enhancing data and metadata modeling, improving data integration and simulation coupling, and guiding the development of decision support strategies and essential software components. Full article

With the rapid development of the logistics industry, the demand for logistics activities is increasing significantly. Concurrently, growing urbanization is causing the space for logistics and warehousing to become limited. Thus, more and more attention is being paid to the planning and construction of logistics facilities. However, due to spatiotemporal trajectory data (such as truck GPS data) being used less often in planning, the method of quantitative analysis for freight spatiotemporal activity is limited. Thus, the spatial layout of logistics and warehousing land does not match the current demand very well. In addition, it is necessary to consider the interactive relationship with the urban built environment in the process of optimizing layout, in order to comprehensively balance the spatial coupling with the functions of housing, transportation, industry, and so on. Therefore, the layout of logistics and warehouse land could be treated as a multi-objective optimization problem. This study aims to establish a model for logistics and warehouse land layout optimization to achieve a supply–demand matching. The proposed model comprehensively considers economic benefits, time benefits, cost benefits, environmental benefits, and other factors with freight GPS data, land-use data, transportation network data, and other multi-source data. A genetic algorithm is built to solve the model. Finally, this study takes the Wuhan urban development area as an example to practice the proposed method in three scenarios in order to verify its effectiveness. The results show that the optimization model solves the problem of mismatch between the supply and demand of logistics spaces to a certain extent, demonstrating the efficiency and scientificity of the optimization solutions. Based on the results of the three scenarios, it is proven that freight activities could effectively enhance the scientific validity of the optimization solution and the proposed model could optimize layouts under different scenario requirements. In summary, this study provides a practical and effective tool for logistics- and warehouse-land layout evaluation and optimization for urban planners and administrators. Full article

This research germinates from the statement that cities need to solve the impacts caused by freight transport to improve their sustainability by implementing a set of city logistic measures. Urban freight distribution through environmentally friendly vehicle measures is one of the main sustainable actions being implemented worldwide, with a significant potential to reduce the congestion and pollution levels according to the assessment performed around the world. In this context, this paper aims to explore the use of railways for urban freight transport and then focuses on the potential of shifting from a road to railway system, which uses an advanced demand modelling framework specified and calibrated according to the results of surveys carried out in the study area. Subsequently, the potential benefits of introducing this urban freight transport through the metro system in Rome (Italy) are investigated, showing significant positive effects, both in terms of operational and external costs. Full article

To solve the problem of urban freight demand and build an efficient, practical, intelligent, green, and sustainable new logistics system, this paper considers the application of the subway network to urban freight transportation and studies the location problem of subway transit stations in the urban freight network. According to the differences between different subway stations, the nodal degree, medial centrality, proximity centrality, and regional accessibility are proposed as the evaluation indexes, and the improved fuzzy analytic hierarchy method and entropy weight method are used to calculate the index weight. The TOPSIS evaluation method is used to evaluate the importance of each subway station, and the importance evaluation model of subway stations is constructed. Combined with the distribution location and transportation demand of urban express delivery outlets, a two-tier planning model for the location of subway transfer stations was constructed with total cost and customer satisfaction as the objective functions, and the case studies were carried out by taking Jiangning District, Lishui District, and Gaochun District of Nanjing as the research objects. The results show that Hohai University Focheng West Road, Zhengfang Middle Road, Qunli, and Gaochun can be transformed into subway transfer stations and used as transshipment centers of the urban cargo transportation network. Compared with the original ground transportation network, 52.87% of the ground transportation distance in the optimized transportation network is replaced by subway transportation, and the total cost of logistics transportation is reduced by 8.73%, which verifies the feasibility of subway for urban cargo transportation, reduces logistics transportation costs, and relieves the pressure of ground transportation, which is of great significance for the sustainable development of urban logistics. Full article

The relentless expansion of urban populations and the surge in e-commerce have increased the demand for rapid delivery services, leading to an increase in truck traffic that contributes to urban congestion, environmental pollution, and economic inefficiencies. The critical challenge this poses is not only in managing urban spaces efficiently but also in aligning with global sustainability goals. This study addresses the pressing need for innovative solutions to reduce reliance on truck transportation in congested urban areas without compromising the efficiency of freight delivery systems. This study contributes a novel approach that leverages electrified and autonomous aircraft (EAA) cargo shuttles to shift the bulk of air transportable freight from road to air, specifically targeting underutilized airports and establishing vertiports in remote locations. By applying data mining techniques to analyze freight flow data, this research identifies key commodity categories and metropolitan statistical areas (MSAs) where the implementation of EAA services could significantly mitigate truck-induced congestion. The findings reveal that targeting a select few commodities and MSAs can potentially decrease truck traffic, with electronics emerging as the dominant commodity category, and cities like Los Angeles and Chicago as prime candidates for initial EAA service deployment. Stakeholders in urban planning, transportation logistics, and environmental policy will find this study’s insights beneficial. This work lays a foundation for future innovations in sustainable urban mobility and logistics. Full article

The development of Latin American cities has been characterised by disorderly expansion. This urbanisation looks set to continue, and, by 2050, there will be a considerable demand for resources, spaces, and food to survive in emerging societies. All this requires an increase in urban freight logistics operations. Although several stakeholders are involved, citizens tend to be overlooked when planners and decision makers look to solve the problems generated by freight operations. This research focuses on logistics activities and stakeholder perceptions in areas of high vehicular flow and commercial establishment density in the mid-sized Colombian city of Popayán. Drawing on the methods proposed in previous studies conducted in Latin American cities, this paper’s scientific value lies in its comprehensive approach, integration of quantitative and qualitative data, and application of PLS-SEM analysis. Its contribution to sustainable urban planning is evident through insights into optimising urban logistics, enhancing stakeholder engagement, promoting sustainable transport, and informing policy formulation. These aspects make the paper a valuable resource for researchers, policymakers, and urban planners seeking to create more sustainable and efficient urban logistics systems. The results show a correlation between commercial establishments’ locations and urban logistics operations. Overall, the research creates an ample scope for studying stakeholder perceptions and urban logistics in other mid-sized Latin American cities. Full article

Since the 1990s, studies and pilot tests have been conducted to reduce traffic, accidents, and pollution due to urban freight transport (UFT). These ended up in several policies, regulations, and restrictions for UFT, such as low emission zones, delivery time windows, and vehicle size and weight restrictions. However, issues in UFT under regulatory measures still persist. This study introduces an optimization framework for deriving an optimal combination of various types of vehicles with different capacities for vehicle replacement with UFT. This framework allows an understanding of how an urban freight company with a limited budget efficiently satisfies its freight demand within an urban area in the presence of regulatory measures by urban administrators. The introduced formulation, which is mixed-integer linear programming, will assist the operator in choosing the best investment strategy for introducing new vehicles of certain types and sizes, for operation in different zones, into its fleet while gaining economic benefits and having a positive impact on the liveability of the urban area. Furthermore, an elasticity analysis is performed to consider the effects of specific uncertain parameters on the total cost. The numerical results show that the share of electric vehicles in the fleet increases, and they are more competitive than diesel vehicles. Full article