Search Results (8)

A computational fluid dynamics investigation of a turbulent supersonic jet impacting a solid flat plate is conducted utilizing the OpenFOAM software. The research focuses on simulating the three-dimensional mean compressible flow for jet impingement on an inclined plate by analyzing the complex flow field and the surface distribution of pressure. Various simulations are carried out at a jet Mach number of 2.2 maintaining a constant nozzle-to-plate distance while varying the angle of inclination of the plate. In contrast to earlier numerical studies, this work employs a modern turbulence modeling technique known as detached eddy simulation (DES), along with a traditional unsteady Reynolds-averaged Navier–Stokes model. Making a comparison with experimental findings, the current analysis reveals that both turbulence modeling techniques effectively predict the mean pressure distribution on the plate. However, the DES approach offers deeper insights into the turbulent flow field, showing notable consistency with the experiments. The complex compressible flow patterns are simulated with higher accuracy compared to the traditional approach. Enhanced turbulence resolution is attained by utilizing the same computational grid with a limited increase in computational complexity. Full article

When a motor is accidentally started, the solid particles produced by fuel combustion have impact and erosion effects on the surrounding structure via gas ejection, and the structure of the bulkhead is damaged. Therefore, in this paper, the effect of solid particle phase motion on a bulkhead was investigated. A two-dimensional SST k-ω model was used for the analysis. The grid size of the core area of a supersonic jet was selected as R_N/24 by the calculation accuracy, and the resources and time consumption of the calculation were comprehensively considered. Based on the simulation of supersonic impact jets, the influence of the phase motion of solid particles was introduced, and the impact of a two-phase jet field on a wall was investigated. The addition of a particle phase created a hysteresis effect on the airflow, changing the shock structure of the pure gas-phase flow field. The rebound of the particle phase at the wall caused the waves in front of the wall to move forward and the stagnation bubble structures to disappear in some cases. The particle aggregation degree and collision angle would affect the particle erosion rate of solid bulkheads. The increase in particle jet impingement distance would change the distribution of particle aggregation and would influence the distribution of wall particle erosion rate and deposition rate. This paper would provide theoretical and engineering guidance for the safety protection design of magazines, which is of great significance for the safety assurance of ship magazines. Full article

The current study explores the flowfield and noise characteristics of an ideally expanded supersonic (Mach 1.44) rectangular jet impinging on a flat surface. The existing literature is primarily concentrated on axisymmetric jets, known for their resonance dominance, pronounced unsteadiness, and acoustic signatures. In contrast, non-axisymmetric jets remain relatively less understood, particularly those impinging on a ground surface. By employing Schlieren imaging, high-frequency pressure measurements using high-bandwidth transducers, and particle image velocimetry (PIV), this research comprehensively examines the flow-acoustic phenomena. Schlieren imaging revealed distinct, coherent structures and strong acoustic waves, while pressure measurements at the impingement surface exhibited high-amplitude fluctuations, peaking at approximately 186 dB. Acoustic analysis identified multiple high-amplitude tones with unique directional characteristics, suggesting the potential for multiple simultaneous modes in rectangular jets. Furthermore, the PIV data elucidated differences in the jet shear layer and wall jet development attributed to the nozzle orientation. These findings contribute to a deeper understanding of non-axisymmetric jet behavior, offering insights relevant to fundamental flow physics and practical applications such as vertical takeoff and landing aircraft. Full article

Supersonic impinging jets are a versatile configuration that can model the compressible flows of cold-spray manufacturing and vertical take-off-and landing strategy. In this work, rhoCentralFoam, solver of the OpenFOAM framework, and a large-eddy simulation formulation were used to simulate an underexpanded supersonic jet of Mach $1.45$ and nozzle pressure ratio of 4, impinging on a flat wall situated at $1.5$ nozzle diameters away from the jet outlet. Care was taken in the mesh construction to properly capture the characteristic standoff shock and vortical structures. The grid convergence index was evaluated with three meshes of increasing spatial resolution. All meshes can generally be considered as sufficient in terms of results focused on time-averaged values and mean physical properties such as centerline Mach number profile. However, the highest resolution mesh was found to capture fine shear vortical structures and behaviors that are absent in the coarser cases. Therefore, the notion of adequate grid convergence may differ between analyses of time-averaged and transient information, and so should be determined by the user’s intention for conducting the simulations. To guide the selection of mesh resolution, scaling analyses were performed, for which the current rhoCentralFoam solver displays a good weak scaling performance and maintains a linear strong scaling up to 4096 cores (32 nodes) for an approximately 40 million-cell mesh. Due to the internode communication bottlenecks of OpenFOAM and improvements in central processing units, this work recommends, for future scaling analyses, adopting a “cells-per-node” basis over the conventional “cells-per-core” basis, with particular attention to the interconnect speed and architecture used. Full article

Though inclined under-expanded planar jets are used in many practical applications, the wall stress resulting from their impingement has not been adequately characterized. Reduced-order models for wall shear as a function of jet parameters have not been reported. This work uses computational fluid dynamics to determine wall shear stress as a function of the nozzle parameters and jet angle. The simulations of the impinging jet are validated against the experimental data and direct numerical simulation; then, the jet parameters are varied to formulate an empirical relationship for maximum wall shear stress as a function of a nozzle pressure ratio, standoff distance, jet Reynolds number, and impingement angle. The global expression for shear stress agrees with the numerical results within a mean deviation of 3%. The relationship can be used for applications where shear stress information is required to design or assess the performance of practical systems, such as surface cleaning, particle resuspension from the surface, and surface cooling. Full article

Successive impingement of droplets after refining in supersonic plasma jet generally yields a submicron-sized lamellar coating with excellent comprehensive properties. Nevertheless, physical insight into the flattening and rapid solidification with crystallization behavior of supersonic impingement of refined droplets is difficult to understand. In this research, the content of refinement droplets reached 90% and displayed the multi-scale distribution of equiaxed grains. The boundary migration of equiaxed grains and anisotropic coalescence was found in the dynamic temperature gradient. Furthermore, an optimized model was established in order to accurately reproduce the multi-physical coupling process of supersonic impingement of single or two refined droplets, which was based on the numerical calculation of nonlinear equations (including the Mass and momentum, energy balance, Cahn–Hilliard, phase-field and orientational field equations). The size distribution and growth orientation of columnar grains within single or two flattened droplets were in good agreement with the experimental results. Epitaxial growth of columnar grains was found in the two-flattened droplet interface during the extremely rapid cooling stage. This optimized model could be an effective method in predicting the flattening and solidification with crystallization behavior of droplets during plasma spraying. Full article

Supersonic impinging jet flows always occur when aircrafts start short takeoff and vertical landing from the ground. Supersonic flows with residues produced by chemical reaction of fuel mixture have the potential of reducing aircraft performance and landing ground. The adverse flow conditions such as impinging force, high noise spectrum, and high shear stress always take place. Due to rare data on particle-gas impinging jet flows to date, three-dimensional numerical simulations were carried out to investigate supersonic impinging jet flows of particle-gas two phases in the present studies. A convergent sonic nozzle and a convergent-divergent supersonic nozzle were used to induce supersonic impinging jet flows. Discrete phase model (DPM), where interaction with continuous phase and two-way turbulence coupling model were considered, was used to simulate particle-gas flows. Effects of different particle diameter and Stokes number were investigated. Particle mass loading of 10% were considered for all simulations. Gas and particle velocity contours, wall shear stress, and impinging force on the ground surface were obtained to describe different phenomena inside impinging and wall jet flows of single gas phase and gas-particle two phases. Full article

The spatiotemporal dynamics of the coherent structures in an under-expanded supersonic impinging jet are studied using a spectral proper orthogonal decomposition technique. For this analysis, a large eddy simulation of an under-expanded supersonic impinging jet at a pressure ratio of 3.4 and a stand-off distance of 2 jet diameters at a Reynolds number of 50,000 is performed. The mean flow fields illustrate some striking features of this flow, such as an oblique shock, a stand-off shock, a Mach disk, and a recirculation bubble. The spectral proper orthogonal decomposition method is applied to time-resolved three-dimensional flow fields. The accumulative energy of modes within each azimuthal mode number reveals that the first three azimuthal modes contain most of the energy of the flow. The spectra of these azimuthal modes show that the flow exhibits a low-ranked behaviour with discrete frequencies at the optimal symmetric azimuthal mode while other two azimuthal modes have negligible contributions in this behaviour. Three peaks are observed in the spectra of the optimal symmetric azimuthal mode. The spatial fields of the streamwise velocity and pressure of these peaks show that the complex structures are consequences of the under-expansion, Mach disk, and the impingement. Strong hydrodynamic instabilities exist in the shear layer of the jet in the optimal azimuthal mode at each of these dominant frequencies. High-amplitude acoustic waves are also present in the near-field of the jet. These acoustic waves are strong at the nozzle lip, suggesting that a feedback loop linking these two processes exists for dominant frequencies in the optimal mode. High cross-spectrum density of near-field pressure fluctuations and streamwise velocity fluctuations near the nozzle lip at these frequencies confirms the hydro-acoustic coupling, which is necessary to close the feedback loop. Full article