Search Results (9)

This study explored innovative approaches to produce ethanol and xylitol from sugarcane bagasse using a hydrodynamic cavitation-assisted photo-Fenton process as the pretreatment, and yeast co-culture for hydrolysate fermentation. Pretreatment conditions were optimized (20 mg/L of iron sulfate, pH 5.0, and reaction time of 14 min) resulting in glucan and xylan hydrolysis yields of 96% and 89%, respectively. The hydrolysate produced under these conditions was fermented using a co-culture of Saccharomyces cerevisiae IR2 (an ethanol-producing strain) and Candida tropicalis UFMGBX12 (a xylitol-producing strain). Optimal co-culture conditions consisted of using an inoculum concentration of 1.5 g/L for each yeast strain. After 36 h of fermentation, ethanol and xylitol concentrations reached 20 g/L and 13 g/L, respectively. These results demonstrate the potential of combining hydrodynamic cavitation-assisted photo-Fenton pretreatment with co-culture fermentation to simultaneously produce ethanol and xylitol. This strategy presents a promising approach for enhancing the efficiency of lignocellulosic biorefineries. Full article

Xylanases, key enzymes for hydrolyzing xylan, have diverse industrial applications. The bioprocessing of agricultural byproducts to produce xylanase through fermentation approaches is gaining importance due to its significant potential to reduce enzyme production costs. In this work, the productivity of Streptomyces thermocarboxydus TKU045 xylanase was enhanced through liquid fermentation employing wheat bran as the sole carbon source. The maximum xylanase activity (25.314 ± 1.635 U/mL) was obtained using the following optima factors: 2% (w/v) wheat bran, 1.4% (w/v) KNO₃, an initial pH of 9.8, an incubation temperature of 37.3 °C, and an incubation time of 2.2 days. Xylanase (Xyn_TKU045) of 43 kDa molecular weight was isolated from the culture supernatant and was biochemically characterized. Analysis through liquid chromatography with tandem mass spectrometry revealed a maximum amino acid identity of 19% with an endo-1,4-β-xylanase produced by Streptomyces lividans. Xyn_TKU045 exhibited optimal activity at pH 6, with remarkable stability within the pH range of 6.0 to 8.0. The enzyme demonstrated maximum efficiency at 60 °C and considerable stability at ≤70 °C. Mg²⁺, Mn²⁺, Ba²⁺, Ca²⁺, 2-mercaptoethanol, Tween 20, Tween 40, and Triton X-100 positively influenced Xyn_TKU045, while Zn²⁺, Fe²⁺, Fe³⁺, Cu²⁺, and sodium dodecyl sulfate exhibited adverse impact. The kinetic properties of Xyn_TKU045 were a K_m of 0.628 mg/mL, a k_cat of 75.075 s⁻¹ and a k_cat/K_m of 119.617 mL mg⁻¹s⁻¹. Finally, Xyn_TKU045 could effectively catalyze birchwood xylan into xylotriose and xylobiose as the major products. Full article

Hot springs worldwide can be a source of extremophilic microorganisms of biotechnological interest. In this study, samplings of a hot spring in Hidalgo, Mexico, were conducted to isolate, identify, and characterize morphologically, biochemically, and molecularly those bacterial strains with potential industrial applications. In addition, a physicochemical and geochemical examination of the hot spring was conducted to fully understand the study region and its potential connection to the strains discovered. The hot spring was classified as sulfate-calcic according to the Piper Diagram; the hydrogeochemical analysis showed the possible interactions between minerals and water. Eighteen bacterial strains were isolated with optimal growth temperatures from 50 to 55 °C. All strains are Gram-positive, the majority having a rod shape, and one a round shape, and 17 produce endospores. Hydrolysis tests on cellulose, pectin, and xylan agar plates demonstrated enzymatic activity in some of the strains. Molecular identification through the 16S rDNA gene allowed classification of 17 strains within the Phylum Firmicutes and one within Deinococcus-Thermus. The bacterial strains were associated with the genera Anoxybacillus, Bacillus, Anerunibacillus, Paenibacillus, and Deinococcus, indicating a diversity of bacterial strains with potential industrial applications. Full article

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more responses in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique’s potential to differentiate various red seaweed species. Full article

Xylanases are hydrolytic enzymes that have tremendous applications in different sectors of life, but the high cost of their production has limited their use. One solution to reduce costs and enhance xylanase production is the use of agro-wastes as a substrate in fungal cultures. In this study, olive mill pomace (OMP) and barley bran (BB) were used as carbon sources and possible inducers of xylanase production by three species of Trichoderma (atroviride, harzianum, and longibrachiatum), one major xylanase producer. The experiments were conducted under a solid-state fermentation system (SSF) in flask cultures and a packed-bed bioreactor. Cultures of OMP and BB were optimized by examining different ratios of OMP and BB, varied particle sizes, and inoculum size for the three species of Trichoderma. The ratio of 8:2 OMP and BB yielded the highest xylanase activity, with a particle size of 1 mm at 29 °C and an inoculum size of 1 × 10⁷ spores/mL. Studying the time profile of the process revealed that xylanase activity was highest after seven days of incubation in flask SSF cultures (1.779 U/mL) and after three days in a packed-bed bioreactor (1.828 U/mL). The maximum percentage of OMP degradation recorded was about 15% in the cultures of T. harzianum flask SSF cultures, compared to about 11% in T. longibrachiatum bioreactor cultures. Ammonium sulfate precipitation and dialysis experiments showed that Xylane enzyme activity ranged from 0.274 U/mL in T. harzianum to 0.837 U/mL in T. atroviride when crude extract was used, with the highest activity (0.628 U/mL) at 60% saturation. Xylose was the main sugar released in all purified fractions, with the G-50 and G-75 fractions showing the maximum units of xylanase. Full article

This narrative review highlights the complexities of the gut microbiome and health-promoting properties of prebiotic xylans metabolized by the gut microbiome. In animal husbandry, prebiotic xylans aid in the maintenance of a healthy gut microbiome. This prevents the colonization of the gut by pathogenic organisms obviating the need for dietary antibiotic supplementation, a practice which has been used to maintain animal productivity but which has led to the emergence of antibiotic resistant bacteria that are passed up the food chain to humans. Seaweed xylan-based animal foodstuffs have been developed to eliminate ruminant green-house gas emissions by gut methanogens in ruminant animals, contributing to atmospheric pollution. Biotransformation of pentosan polysulfate by the gut microbiome converts this semi-synthetic sulfated disease-modifying anti-osteoarthritic heparinoid drug to a prebiotic metabolite that promotes gut health, further extending the therapeutic profile and utility of this therapeutic molecule. Xylans are prominent dietary cereal components of the human diet which travel through the gastrointestinal tract as non-digested dietary fibre since the human genome does not contain xylanolytic enzymes. The gut microbiota however digest xylans as a food source. Xylo-oligosaccharides generated in this digestive process have prebiotic health-promoting properties. Engineered commensal probiotic bacteria also have been developed which have been engineered to produce growth factors and other bioactive factors. A xylan protein induction system controls the secretion of these compounds by the commensal bacteria which can promote gut health or, if these prebiotic compounds are transported by the vagal nervous system, may also regulate the health of linked organ systems via the gut–brain, gut–lung and gut–stomach axes. Dietary xylans are thus emerging therapeutic compounds warranting further study in novel disease prevention protocols. Full article

The main aim of this investigation was to study the interaction of sulfated xylans as antithrombotic substances with poly(ethylene terephthalate) (PET) model films as a model for blood contacting surfaces. The adsorption of sulfated xylans onto PET model films was studied as a function of pH and ionic strength using the quartz crystal microbalance with dissipation (QCM-D) technique. The application of positively charged polyethyleneimine (PEI) as an anchoring polymer was done to improve the adsorption. The hydrophilic/hydrophobic properties of functionalized PET surfaces were monitored by goniometry, whilst their elemental composition was determined by X-ray photoelectron spectroscopy. Sulfated xylans adsorbed favorably at pH 5 by physical interactions and by entropy gain driven adsorption. Higher ionic strengths of solutions improved adsorption, due to the reduction of electrostatic repulsive forces between PET surfaces and anionic xylans’ macromolecules. The intermediate PEI layer caused more extensive and stable adsorption due to Coulomb interactions. The surface modifications presented in this work provided important information regarding the adsorption/desorption phenomena between antithrombotic sulfated xylans and PET surfaces. The latter is of great interest when preparing advanced polymer composite material such as functional antithrombotic PET surfaces for blood-contacting medical devices and presents an extremely challenging research field. Full article

Pretreated dirty cotton residue (PDCR) from the textile industry was used as an alternative carbon source for the submerged cultivation of Aspergillus oryzae and the production of xylanases. The filtered culture supernatant was fractionated by ultrafiltration followed by three chromatographic steps, which resulted in the isolation of a homogeneous low-molecular-weight xylanase (Xyl-O1) with a mass of 21.5 kDa as determined by sodium dodecyl sulfate-polyacrilamide gel electrophoresis (SDS-PAGE) co-polymerized with 0.1% oat spelt xylan. Enzyme catalysis was the most efficient at 50 °C and pH 6.0. The K_m values (mg·mL⁻¹) for the soluble fraction of oat spelt and birchwood xylans were 10.05 and 3.34, respectively. Xyl-O1 was more stable in the presence of 5,5-dithio-bis-(2-nitrobenzoic acid) (DTNB), 1,4-dithiothreitol (DTT), l-cysteine or β-mercaptoethanol, which increased the rate of catalysis by 40%, 14%, 40% or 37%, respectively. The enzyme stability was improved at pH 7.0 in the presence of 20 mM l-cysteine, with the retention of nearly 100% of the activity after 6 h at 50 °C. Xyl-O1 catalyzed the cleavage of internal β-1,4 linkages of the soluble substrates containing d-xylose residues, with a maximum efficiency of 33% for the hydrolysis of birchwood xylan after 12 h of incubation. Identification of the hydrolysis products by high-performance anion exchange chromatography coupled with pulsed amperometric detection (HPAEC-PAD) indicated the predominance of the hydrolysis products X2-X6 during the first 12 h of incubation and the accumulation of higher xylooligomers after the elution of the last xylooligomer standard, xylohexaose. Full article

An antifungal protein produced by Bacillus licheniformis strain BS-3 was purified to homogeneity by ammonium sulfate precipitation, DEAE-52 column chromatography and Sephadex G-75 column chromatography. The purified protein was designated as F2 protein, inhibited the growth of Aspergillus niger, Magnaporthe oryzae and Rhizoctonia solani. F2 protein was a monomer with approximately molecular weight of 31 kDa in sodium dodecyl sulfate-polyacrylamide gel electrophoresis and gave a single peak on High Performance Liquid Chromatography (HPLC). Using Rhizoctonia solani as the indicator strain, the EC₅₀ of F2 protein was 35.82 µg/mL, displaying a higher antifungal activity in a range of pH 6.0 to pH 10.0, and at a temperature below 70 °C for 30 min. F2 protein was moderately resistant to hydrolysis by trypsin, proteinase K, after which its relative activities were 41.7% and 59.5%, respectively. F2 protein was assayed using various substrates to determine the enzymatic activities, the results showed the hydrolyzing activity on casein, however, no enzymatic activities on colloidal chitin, CM-cellulose, xylan, M. lysodeikticus, and p-nitrophenyl-N-acetylglucosaminide. Full article