Search Results (5)

In the launch environment, satellites are subjected to severe dynamic loads. These dynamic loads in the launch environment can lead to the malfunction of the payload, or to mission failure. In order to improve the structural stability of satellites and enable the reliable execution of space missions, it is necessary to have a reinforcement structure that reduces structural vibrations. However, for active small SAR satellites, the mass requirements are very strict, and this makes it difficult to apply an additional structure for vibration reduction. Therefore, we have developed a carbon fiber-reinforced plastic (CFRP)-based laminated patch to obtain a vibration reduction structure with a lightweight design for improving the structural stability of an S-STEP satellite. To verify the vibration reduction performance of the CFRP-based patch, sine and random vibration tests were conducted at the specimen level. Finally, the structural stability of the S-STEP satellite with the proposed CFRP-based laminated patch was experimentally verified using sine and random vibration tests. The validation results indicate that the CFRP-based laminated patch is an efficient solution which can effectively reduce the vibration response without the need for major changes to the design of the satellite structure. The lightweight vibration reduction mechanism developed in this study is one of the best solutions for protecting vibration-sensitive components. Full article

In a launch environment, all satellites are subjected to severe random vibration and acoustic loads owing to rocket separation, airflow, and injection/combustion of the fuel. Structural vibrations induced by mechanical loads cause the malfunction of vibration-sensitive components in a satellite, leading to failures during the launch process or an on-orbit mission. Therefore, in this study, a shape memory alloy-based vibration isolator was used on the connection between the launch vehicle and satellite to reduce the vibration transmission to a satellite. The vibration isolator exhibited a high performance in the vibration isolation, owing to the dynamic properties of super-elasticity and high damping. The vibration-reduction performance of the vibration isolator was experimentally verified using random vibration and acoustic tests in a structural thermal model of the satellite developed in the synthetic aperture radar technology experimental project. Owing to the super-elasticity and high attenuation characteristics of the vibration isolator, it was possible to significantly reduce the random vibration of the satellite in the launch environment. Although the mechanical load of the acoustic test mainly excited the antenna on the upper side of the satellite rather than the bottom side, the results of the acoustic test showed the same trend as the random vibration test. From this perspective, the vibration isolator can contribute to saving the costs required for satellite development. These advantages have made it possible to develop satellites according to the new space paradigm, which is a trend in the space industry worldwide. Full article

The small synthetic aperture radar (SAR) technology experimental project (S-STEP) mission aims to develop an innovative spaceborne SAR microsatellite as a constellation of 32 microsatellites featuring a high-resolution stripmap mode of 1 m. The S-STEP is a spaceborne SAR microsatellite technology demonstration program in which innovative approaches have been proposed and investigated for SAR payload system designs for improving the development speed, affordability, size and weight parameters, and quality of SAR satellite systems. In this study, the major design approach includes a bus–payload integrated flat-panel-type SAR payload based on an active phased-array antenna. This study conducted an SAR image performance analysis considering the mission requirements to validate the feasibility of the innovative SAR payload design of the S-STEP. These performance analysis results are presented to demonstrate the effectiveness of the proposed SAR payload design approach under the new space paradigm. Full article

The main objective of the S-STEP (the Small Synthetic Aperture Radar (SAR) Technology Experimental Project (S-STEP)) mission is developing an 80-kg-class active X-band SAR observation small satellite. For lighter, smaller, better, and cheaper development of the S-STEP system, a new thermal design strategy is essential. Therefore, we proposed a new thermal design strategy in this study. The main features of the proposed thermal design involve the minimization of heater power consumption by optimizing environmental heat fluxes on the satellite, the provision of long-term SAR imaging duration in both right- and left-looking modes, and the use of a lightweight flexible graphite sheet as a thermal interface for some high-power instruments. These features contribute to minimizing the satellite’s mass budget through heater power minimization and achieving on-orbit system performance of S-STEP. The effectiveness of the proposed thermal design was numerically verified by on-orbit thermal analysis of the S-STEP system. In addition, the thermal design on a key payload component and the multifunctional transmit/receive module structure were verified through a space-simulated thermal vacuum test. Full article

The Small SAR Technology Experimental Project (S-STEP) mission aims to develop a new (space-based 80 kg-class active X-band synthetic aperture radar (SAR)) satellite with a main imaging mode of 1 m resolution stripmap. In the S-STEP mission, to achieve the design goal of developing faster, cheaper, better, and lighter small SAR satellite systems, innovative thermo-mechanical design approaches have been proposed and investigated. The major design approaches are the bus-payload integrated flat plate-type structure, multifunctional transmit/receive (TR) module, and dedicated vibration-free orbit deployer (VFOD) with the function of whole spacecraft vibration isolation. To validate the feasibility of the innovative mechanical design of S-STEP, a structural analysis considering launch and on-orbit environments is performed. In addition, development test results are presented to confirm the effectiveness of the proposed design approach for VFOD. Full article