Search Results (29)

Benzalkonium chloride (BC) is widely used as a disinfectant in the food industry; however, increasing reports of Listeria innocua isolates exhibiting tolerance to this compound highlight the need to better understand their adaptive mechanisms. This study aimed to evaluate BC tolerance in 51 L. innocua isolates originating from raw and processed meat products (n = 32) and meat-processing environments in Poland (n = 19). Phenotypic tolerance was assessed using the agar diffusion method on two media: Brain Heart Infusion (BHI) agar and Mueller–Hinton (M-H) agar supplemented with 1.2% sheep blood, across BC concentrations of 0, 5, 10, 15, 20, 25, 30, 35, 40, and 45 µg/mL, allowing the determination of minimum inhibitory concentrations (MICs). Genotypic analysis of tolerance determinants (brcABC, ermC, qacE, qacF, qacG, qacH, and qacJ) was performed by PCR. On BHI agar, MIC values ranged from 15 to 30 µg/mL, with 15 µg/mL most frequently observed, whereas on blood-supplemented M-H agar, MICs were lower (5–20 µg/mL), most commonly 10 µg/mL. Among tolerance-associated genes, qacH was the most prevalent (29% of isolates), followed by brcABC (4%) and ermC (2%), while the remaining genes were absent. These findings suggest that food products may serve as a reservoir for L. innocua isolates harboring tolerance to BC and contribute to a deeper understanding of how this species adapts to quaternary ammonium compounds. Full article

Cationic surfactants from the group of quaternary ammonium compounds (QACs) are widely used in disinfectants, cosmetics, and household and industrial products. Their strong antimicrobial activity and chemical stability make them valuable in applications but also highly persistent and toxic when released into aquatic environments. This problem has become increasingly relevant during and after the COVID-19 pandemic, when global use of QAC-based disinfectants increased drastically, resulting in their frequent detection in municipal, hospital, and industrial effluents. The concentrations of QACs reported in wastewater range from trace levels to several mg/L, often reaching inhibitory thresholds for biological treatment processes. Although surfactants are not listed in any current European directive, the revised Directive (EU) 2024/1440 classifies micropollutants as a priority group, imposing stricter environmental quality standards and mandatory monitoring requirements. Within this regulatory framework, QACs are recognized as compounds of emerging concern, and their effective removal from wastewater has become a critical challenge. This review summarizes the current knowledge on conventional treatment technologies (coagulation, adsorption, ion exchange, advanced oxidation, and biological processes) and membrane-based methods (ultrafiltration, nanofiltration, reverse osmosis, forward osmosis, and hybrid systems) for the removal of cationic surfactants from water and wastewater. Mechanisms of separation, performance, and operational limitations are discussed. Full article

Managing bacterial infections and the spread of microbial resistance is one of the most critical and complex tasks of modern healthcare infrastructures. Antiseptics and disinfectants such as biocides play a significant role in controlling microbial resistance by reducing the microbial load on surfaces, skin, and environments, thereby limiting the opportunity for pathogens to proliferate and develop resistance. Herein, we tested the different interactions of quaternary ammonium compound (QAC)-based biocide compositions in pursuit of a better antimicrobial performance. An extensive microbiological analysis was conducted for 12 selected compositions of various combinations of mono-QACs, bis-QACs, and alcohols on 17 strains of bacteria of the ESKAPEE group and fungi, including 11 clinical highly resistant varieties, highlighting synergistic or additive dynamics. The evaluation showed noticeable improvements in activity, with up to 16-fold MBC and 32-fold MBEC reductions for alcohol-based compositions of lead QAC. Moreover, synergistic interactions were detected and confirmed via an optimized checkerboard assay for pyridinium QAC combinations against planktonic Gram-positive S. aureus with a fractional inhibitory concentration index (FICI) and fractional bactericidal concentration index (FBCI) of 0.39–0.5 and Gram-negative A. baumannii biofilms. The studied biocides demonstrated the long-term preservation of antimicrobial efficiency without resistance development during a 40-day period and do not induce QAC-associated cross-resistance for four commercially available antibiotics with similar mechanisms of action. Full article

Quaternary ammonium compounds (QACs) are a class of chemicals used for their antimicrobial, surfactant, and antistatic properties. QACs are present in many consumer products, and people are regularly exposed to them. We have previously shown reproductive toxicity in mice exposed to the disinfectants alkyl dimethyl benzyl ammonium chloride (ADBAC) and dodecyl dimethyl ammonium chloride (DDAC). To assess the long-term reproductive impacts, a generational reproductive study was conducted. Sperm parameters were determined by CASA and epigenetic enzyme mRNA expression was determined by pathway-focused RT-PCR. Mice ambiently exposed to ADBAC+DDAC exhibited decreases in reproductive indices that persisted through the F1 generation. Male mice (F0) dosed with 120 mg/kg/day of ADBAC+DDAC exhibited decreased sperm concentration and motility that persisted through the F1 generation. Changes in the mRNA expression of chromatin-modifying enzymes in the testes were seen. Two histone acetyltransferases (Hat1 and Kat2b) were upregulated, and one lysine-specific demethylase (Kdm6b) was downregulated in the F0 generation. The DNA methyltransferase Dnmt1 was downregulated in F1 males. These changes in chromatin-modifying enzymes are known to decrease fertility and could be a mechanism for ADBAC+DDAC reproductive toxicity. In all experiments, the F2 generation was similar to the controls, showing multi-generational but not trans-generational epigenetic inheritance. Full article

As the primary biological risk threatening safe dairy production, bovine mastitis control highly relies on environmental disinfection measures. However, the mechanisms by which chemical disinfectants influence host–environment microbial interactions remain unclear. This study systematically investigated the disinfection efficacy and regulatory effects on microbial community composition and diversity of glutaraldehyde-benzalkonium chloride (BAC) and glutaraldehyde-didecyl dimethyl ammonium bromide (DAB) at recommended concentrations (2–5%), using 80 environmental samples from intensive dairy farms in Xinjiang, China. Combining 16S rDNA sequencing with culturomics, the results showed that BAC achieved a disinfection rate of 99.33%, higher than DAB’s 97.87%, and reduced the environment–gut microbiota similarity index by 23.7% via a cationic bacteriostatic film effect. Microbiome analysis revealed that BAC selectively suppressed Fusobacteriota abundance (15.67% reduction) and promoted Bifidobacterium proliferation (7.42% increase), enhancing intestinal mucosal barrier function through butyrate metabolism. In contrast, DAB induced Actinobacteria enrichment in the environment (44.71%), inhibiting pathogen colonization via bioantagonism. BAC’s long-acting bacteriostatic properties significantly reduced disinfection costs and mastitis incidence. This study first elucidated the mechanism by which quaternary ammonium compound (QAC) disinfectants regulate host health through “environment-gut” microbial interactions, providing a critical theoretical basis for developing precision disinfection protocols integrating “cost reduction-efficiency enhancement-risk mitigation.” Full article

While the pandemic is behind us, the world community faces a global threat of bacterial resistance outbreak. One of the key ways to combat the spread of multi-resistant bacteria is infection prevention and control tactics using modern antiseptic and disinfectant compositions. Herein, we continue the path to unravel the structure–activity relationship (SAR) of potent pyridine-derived biocide class bis-quaternary ammonium compounds (QACs). In this study, twenty dihydroxynaphthalene-derivative bis-QACs were subjected to extensive microbiological analysis on planktonic cells and biofilms of the ESKAPE microorganisms. Among them, hit compounds were superior in their bacteriostatic and bactericidal action to commercial mono-QACs and were comparable to the best bis-QAC antiseptic on the market. SAR analysis indicated that the linker conformation does not significantly affect the activity, though structure symmetry and especially lipophilicity had an influence on antibacterial performance. Furthermore, we delve deeper in investigation of the antimicrobial potential of bis-QACs and conducted a variety of assays, including time–kill kinetics, bacterial resistance formation, cell morphology, and cytotoxicity. Studies showed promising results for compounds 5d and 6d, indicating 2 to 3-fold less cytotoxicity and hemotoxicity compared to commercial QACs. Moreover, SEM imaging revealed that bis-QACs can cause severe membrane damage to S. aureus and P. aeruginosa strains, confirming great potential of novel compounds as antiseptic and disinfectant. Full article

Antibacterial coatings based on quaternary ammonium compounds (QACs) have been widely investigated in controlled release applications. Quaternary ammonium compounds are low-cost and easily accessible disinfectants that have been extensively used, especially after the COVID-19 outbreak. There has been a growing interest in developing a clearer understanding of various aspects that need to be taken into account for the design of quaternary ammonium compounds to be used in the biomedical field. In this contribution, we outline the mechanism of action of those materials as well as the key design parameters associated with their structure and antibacterial activity. Moreover, emphasis has been placed on the type of antibacterial coatings based on QACs and their applications in the biomedical field. A brief outlook on future research guidelines for the development of dual-function antibacterial coatings is also discussed. Full article

A carbapenem-resistant Acinetobacter baumannii (CRAB) outbreak in an intensive care unit (ICU) was contained by an improved infection-control measure that included a disinfectant policy. In our retrospective cohort study, we describe the epidemiological investigations and infection-control measures during this outbreak. Descriptive analysis was used to summarize patient demographics, neurological diseases, surgical treatment, underlying diseases, infection, and outcomes. In December 2023, two CARB-positive patients were observed in the ICU, and four more patients became CRAB-positive in January. During this outbreak, there was an overlap of hospitalization periods among the CRAB-positive patients, and CRAB was isolated from the environment; the isolated CRAB strain was identical. Infection-control measures, including hand hygiene, contact precautions and isolation, surveillance, decolonization, environmental cleaning, and disinfection, were reviewed and modified. The aim of this study was to examine the molecular background of the effectiveness of the disinfectant shift used during successful outbreak control. Experiments were carried out to study the phenotypic sensitivity and genetic background of different disinfectant agents. A thorough analysis of the detected CRAB strain included whole-genome sequencing (WGS), investigation of the qacE and qacEΔ1 genes’ relative expression by qPCR after exposure to different disinfectant solutions, as well as an analysis of biofilm formation. WGS analysis of the CRAB strain identified that an ST2 high-risk clone was responsible for the outbreak, which produced OXA-83 and ADC-30 beta-lactamases; in addition, qacE and qacEΔ1 genes were also detected, which confer resistance to disinfectants containing quaternary ammonium compounds (QACs). A qPCR analysis demonstrated that after exposure to different disinfectants, the gene expression levels of qacE and qacEΔ1 increased and correlated with concentrations of QACs of disinfectants. During the outbreak, the standard-of-care QAC-based disinfectant was changed to a mainly alcohol-based agent in the ICU, which contributed to the successful control of this outbreak, and no additional patients were identified with CRAB. We conclude that continuous surveillance and hand hygiene training combined with fast identification and reaction to new cases, as well as an in-depth analysis of multidrug-resistant outbreak strains and investigation of their disinfectant tolerance/resistance during an outbreak, are essential to effectively control the spread of nosocomial pathogens. The smart policy of disinfectant agent selection played a crucial role in controlling the outbreak and ensuring patient safety in the ICU. Full article

Quaternary ammonium compounds (QACs) are active ingredients in hundreds of disinfectants for controlling the epidemic of infectious diseases like SARS-CoV-2 (COVID-19), and are also widely used in shale gas exploitation. The occurrence of QAC-resistant bacteria in the environment could enlarge the risk of sterilization failure, which is not fully understood. In this study, QAC-resistant bacteria were enumerated and characterized in 25 soils collected from shale gas exploitation areas. Total counts of QAC-resistant bacteria ranged from 6.81 × 10³ to 4.48 × 10⁵ cfu/g, accounting for 1.59% to 29.13% of the total bacteria. In total, 29 strains were further purified and identified as Lysinibacillus, Bacillus, and Klebsiella genus. There, bacteria covering many pathogenic bacteria showed different QACs tolerance with MIC (minimum inhibition concentration) varying from 4 mg/L to 64 mg/L and almost 58.6% of isolates have not previously been found to tolerate QACs. Meanwhile, the QAC-resistant strains in the produced water of shale gas were also identified. Phylogenetic trees showed that the resistant species in soil and produced water are distinctly different. That is the first time the distribution and characterization of QAC-resistant bacteria in the soil environment has been analyzed. Full article

(1) Background: L. monocytogenes is a food pathogen of great importance, characterized by a high mortality rate. Quaternary ammonium compounds (QACs), such as benzalkonium chloride (BC), are often used as disinfectants in food processing facilities. The effectiveness of disinfection procedures is crucial to food safety. (2) Methods: A collection of 153 isolates of L. monocytogenes from meat processing industry was analyzed for their sensitivity to BC using the agar diffusion method. Genes of interest were detected with PCR. (3) Results: Genes emrC, bcrABC, and qacH were found in 64 (41.8%), 6 (3.9%), and 1 isolate (0.7%), respectively, and 79 isolates (51.6%) were classified as having reduced sensitivity to BC. A strong correlation between carrying QACs resistance-related genes and phenotype was found (p-value < 0.0001). Among 51 isolates originating from bacon (collected over 13 months), 48 had the emrC gene, which could explain their persistent presence in a processing facility. Isolates with the ilsA gene (from LIPI-3) were significantly (p-value 0.006) less likely to carry QACs resistance-related genes. (4) Conclusions: Reduced sensitivity to QACs is common among L. monocytogenes from the meat processing industry. Persistent presence of these bacteria in a processing facility is presumably caused by emrC-induced QACs resistance. Full article

Selecting the appropriate disinfectant to control and prevent healthcare-associated infections (HAIs) is a challenging task for environmental health experts due to the large number of available disinfectant products. This study aimed to develop a label-free flow cytometry (FCM) method for the rapid evaluation of bactericidal activity and to compare its efficacy with that of standard qualitative/quantitative suspension tests. The bactericidal efficiency of eight commercial disinfectants containing quaternary ammonium compounds (QACs) was evaluated against four strains recommended by EN 13727 (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, Enterococcus hirae) and four multidrug-resistant pathogens. The proposed FCM protocol measures changes in scattered light and counts following disinfectant exposure, neutralization, and culture steps. Unlike other available FCM-based methods, this approach does not rely on autofluorescence measurements, impedance cytometry, or fluorescent dyes. The FCM scattered light signals revealed both decreased count rates and morphological changes after treatment with minimum inhibitory concentrations (MICs) and higher concentrations for all tested bacteria. The results from the FCM measurements showed excellent correlation with those from standard assays, providing a rapid tool for monitoring the susceptibility profile of clinical, multidrug-resistant pathogens to chemical disinfectants, which could support infection prevention and control procedures for healthcare environments. This label-free FCM protocol offers a novel and rapid tool for environmental health experts, aiding in the optimization of disinfectant selection for the prevention and control of HAIs. Full article

Antimicrobial tolerance is a significant concern in the food industry, as it poses risks to food safety and public health. To overcome this challenge, synergistic combinations of antimicrobials have emerged as a potential solution. In this study, the combinations of two essential oil constituents (EOCs), namely carvacrol (CAR) and eugenol (EUG), with the quaternary ammonium compounds (QACs) benzalkonium chloride (BAC) and didecyldimethylammonium chloride (DDAC) were evaluated for their antimicrobial effects against Escherichia coli and Bacillus cereus, two common foodborne bacteria. The checkerboard assay was employed to determine the fractional inhibitory concentration index (FICI) and the fractional bactericidal concentration index (FBCI), indicating the presence of bactericidal, but not bacteriostatic, synergy in all QAC–EOC combinations. Bactericidal synergism was clearly supported by Bliss independence analysis. The bactericidal activity of the promising synergistic combinations was further validated by time–kill curves, achieving a >4-log₁₀ reduction of initial bacterial load, which is significant compared to typical industry standards. The combinations containing DDAC showed the highest efficiency, resulting in the eradication of bacterial population in less than 2–4 h. These findings emphasize the importance of considering both bacteriostatic and bactericidal effects when evaluating antimicrobial combinations and the potential of EOC–QAC combinations for sanitization and disinfection in the food industry. Full article

This review provides a comprehensive overview of recent advancements in the design and synthesis of biologically active quaternary ammonium compounds (QACs). The covered scope extends beyond commonly reviewed antimicrobial derivatives to include synthetic agents with antifungal, anticancer, and antiviral properties. Additionally, this review highlights examples of quaternary ammonium compounds exhibiting activity against protozoa and herbicidal effects, as well as analgesic and anesthetic derivatives. The article also embraces the quaternary-ammonium-containing cholinesterase inhibitors and muscle relaxants. QACs, marked by their inherent permanent charge, also find widespread usage across diverse domains such as fabric softeners, hair conditioners, detergents, and disinfectants. The effectiveness of QACs hinges greatly on finding the right equilibrium between hydrophilicity and lipophilicity. The ideal length of the alkyl chain varies according to the unique structure of each QAC and its biological settings. It is expected that this review will provide comprehensive data for medicinal and industrial chemists to design and develop novel QAC-based products. Full article

Cellulose-based fibers are desirable materials for nonwoven wipes for their good absorbency, strength, cleaning, and biodegradable properties. However, quaternary ammonium compounds (QACs), being cationic in nature, show electrostatic interactions with anionic cellulosic fibers, reducing the available QACs to efficiently clean surfaces. This research presents sustainable alternative fibers that show better controlled exhaustion than commercial wipes and textile fibers. Textile and lignocellulosic fibers were prepared, soaked in QAC, and a UV–vis spectrophotometer was used to measure their exhaustion percentages. Factors such as immersion time and concentration of the disinfectant were also investigated, which affect the rate of exhaustion of the disinfectant from the fibers. A higher immersion time resulted in better exhaustion, whereas the total exhaustion decreased with an increase in the initial concentration of the disinfectant. The exhaustion of benzalkonium chloride (BAC) from the commercial wipes was also investigated at different immersion times and BAC concentrations. It was found that the wood and non-wood fibers showed more controlled exhaustion than the textile fibers and commercial wipes, and could be considered an alternative option for renewable and sustainable wipes and hygiene products. Full article

Quaternary ammonium compounds (QACs) are among the most potent antimicrobial agents increasingly used by humans as disinfectants, antiseptics, surfactants, and biological dyes. As reports of bacterial co- and cross-resistance to QACs and their toxicity have emerged in recent years, new attempts are being made to develop soft QACs by introducing hydrolyzable groups that allow their controlled degradation. However, the development of such compounds has been hindered by the structural features that affect the bioactivity of QACs, one of them being polarity of the substituent near the quaternary center. To further investigate the influence of the polar group on the bioactivity of QACs, we synthesized 3-aminoquinuclidine salts for comparison with their structural analogues, 3-acetamidoquinuclidines. We found that the less polar amino-substituted compounds exhibited improved antibacterial activity over their more polar amide analogues. In addition to their better minimum inhibitory concentrations, the candidates were excellent at suppressing Staphylococcus aureus biofilm formation and killing bacteria almost immediately, as shown by the flow cytometry measurements. In addition, two candidates, namely QNH₂-C₁₄ and QNH₂-C₁₆, effectively suppressed bacterial growth even at concentrations below the MIC. QNH₂-C₁₄ was particularly effective at subinhibitory concentrations, inhibiting bacterial growth for up to 6 h. In addition, we found that the compounds targeted the bacterial membrane, leading to its perforation and subsequent cell death. Their low toxicity to human cells and low potential to develop bacterial resistance suggest that these compounds could serve as a basis for the development of new QACs. Full article