Search Results (5)

This article examines the first Spanish American lacquerwares produced by Indigenous artisans in the seventeenth century, barniz de Pasto in Colombia and Peribán lacquer in Mexico, and discusses how the evolution of the decorative motifs, techniques, and forms of these lacquerwares can establish an initial dating chronology. Over the last thirty years, a sufficient number of examples of seventeenth-century Spanish American lacquerware have come to light that are datable, whether through provenance, historical references, or radiocarbon dating, and that make possible tentative chronologies for their production. The Hispanic Society of America in New York City holds at present the most significant collection of datable pieces of barniz de Pasto and Peribán lacquerware that now provide the key dates that can serve as the basis for establishing dating chronologies. Full article

Color reintegration is a restoration treatment that involves applying paint or colored plaster to an object of cultural heritage to facilitate its perception and understanding. This study examines the impact of lighting on the visual appearance of one such restored piece: a tiled skirting panel from the Nasrid period (1238–1492), permanently on display at the Museum of the Alhambra (Spain). Spectral images in the range of 380–1080 nm were obtained using a hyperspectral image scanner. CIELAB and CIEDE2000 color coordinates at each pixel were computed assuming the CIE 1931 standard colorimetric observer and considering ten relevant illuminants proposed by the International Commission on Illumination (CIE): D65 plus nine white LEDs. Four main hues (blue, green, yellow, and black) can be distinguished in the original and reintegrated areas. For each hue, mean color difference from the mean (MCDM), CIEDE2000 average distances, volumes, and overlapping volumes were computed in the CIELAB space by comparing the original and the reintegrated zones. The study reveals noticeable average color differences between the original and reintegrated areas within tiles: 6.0 and 4.7 CIEDE2000 units for the yellow and blue tiles (with MCDM values of 3.7 and 4.5 and 5.8 and 7.2, respectively), and 16.6 and 17.8 CIEDE2000 units for the black and green tiles (with MCDM values of 13.2 and 12.2 and 10.9 and 11.3, respectively). The overlapping volume of CIELAB clouds of points corresponding to the original and reintegrated areas ranges from 35% to 50%, indicating that these areas would be perceived as different by observers with normal color vision for all four tiles. However, average color differences between the original and reintegrated areas changed with the tested illuminants by less than 2.6 CIEDE2000 units. Our current methodology provides useful quantitative results for evaluation of the color appearance of a reintegrated area under different light sources, helping curators and museum professionals to choose optimal lighting. Full article

Doctrinal texts on architectural heritage conservation emphasize the importance of fully understanding the structural and material characteristics and utilizing information systems. Photogrammetry allows for the generation of detailed, geo-referenced Digital Elevation Models of architectural elements at a low cost, while GIS software enables the addition of layers of material characteristic data to these models, creating different property maps that can be combined through map algebra. This paper presents the results of the mechanical characterization of materials and salt-related decay forms of the polygonal apse of the 13th-century monastery of Santa María de Bonaval (Guadalajara, Spain), which is primarily affected by salt crystallization. Rock strength is estimated using on-site nondestructive testing (ultrasound pulse velocity and Leeb hardness). They are mapped and combined through map algebra to derive a single mechanical soundness index (MSI) to determine whether the decay of the walls could be dependent on the orientation. The presented results show that salt decay in the building is anisotropic, with the south-facing side of the apse displaying an overall lower MSI than the others. The relative overheating of the south-facing side of the apse enhances the effect of salt crystallization, thereby promoting phase transitions between epsomite and hexahydrite. Full article

Dissimilar welding used in the automotive area are possible joints with the GMAW process; however, its structural performance must be evaluated. The focus of this work is to study the microstructural–mechanical properties of dissimilar welding DPC340Y590T dual phase–JSC270C low carbon steels. Microhardness profile, tensile, and impact tests were used to evaluate the mechanical behavior, while optical and scanning electron microscopy were employed to evaluate the microstructural changes. The tensile strength was 540 and 275 MPa in dual phase and low carbon, respectively. Weld thermal cycles were obtained by means of K type thermocouples. The welding heat input generated martensite and grain growth in the dual phase heat affect zone, while grain growth and perlite phase increased in the low carbon heat affected zone. The variation in microhardness profile was produced by the presence of different phases, and the temperature at the end of dual phase heat affect zone was approximately 242 °C. During impact tests, the absorbed energies were 19.3, 50.7, and 50.2 J for low carbon, dual phase steel, and the welded dissimilar joint respectively. Finally, dissimilar welding subjected to tensile test failed in the low carbon steel (270 MPa), out of the heat affect zone, thus a good dissimilar joint between both steels was obtained. Full article

In central Italy, particularly in the Umbria-Marche Apennines, there are some complete, high-altitude weather stations, which are very important for assessing the climate in these areas. The mountain weather stations considered in this study were Monte Bove Sud (1917 m.a.s.l.), Monte Prata (1816 m.a.s.l.) and Pintura di Bolognola (1360 m.a.s.l.). The aim of this research was to compare the differences between the precipitation measured by the rain gauges and the data obtained by satellite using the IMERG algorithm, at the same locations. The evaluation of possible errors in the estimation of precipitation using one method or the other is fundamental for obtaining a reliable estimate of precipitation in mountain environments. The results revealed a strong underestimation of precipitation for the rain gauges at higher altitudes (Monte Bove Sud and Monte Prata) compared to the same pixel sampled by satellite. On the other hand, at lower altitudes, there was a better correlation between the rain gauge value and the IMERG product value. This research, although localised in well-defined locations, could help to assess the problems in rain detection through mountain weather stations. Full article