Search Results (39)

The El Bola mafic–ultramafic intrusion (EBMU) in Egypt’s Northern Eastern Desert represents an example of Neoproterozoic post-collisional layered mafic–ultramafic magmatism in the Arabian–Nubian Shield (ANS). The intrusion is composed of pyroxenite, olivine gabbro, pyroxene gabbro, pyroxene–hornblende gabbro, and hornblende-gabbro, exhibiting adcumulate to heter-adcumulate textures. Mineralogical and geochemical analyses reveal a coherent trend of fractional crystallization. Compositions of whole rock and minerals indicate a parental magma of ferropicritic affinity, derived from partial melting of a hydrous, metasomatized spinel-bearing mantle source, likely modified by subduction-related fluids. Geothermobarometric calculations yield crystallization temperatures from ~1120 °C to ~800 °C and pressures from ~5.2 to ~3.1 kbar, while oxygen fugacity estimates suggest progressive oxidation (log fO₂ from −17.3 to −15.7) during differentiation. The EBMU displays Light Rare Earth element (LREE) enrichment, trace element patterns marked by Large Ion Lithophile Element (LILE) enrichment, Nb-Ta depletion and high LILE/HFSE (High Field Strength Elements) ratios, suggesting a mantle-derived source that remained largely unaffected by crustal contribution and was metasomatized by slab-derived fluids. Tectonic discrimination modeling suggests that EBMU magmatism was triggered by asthenospheric upwelling and slab break-off. Considering these findings alongside regional geologic features, we propose that the mafic–ultramafic intrusion from the ANS originated in a tectonic transition between subduction and collision (slab break-off) following the assembly of Gondwana. Full article

Recently, we introduced random complex and phase screen methods as powerful tools for numerically investigating the evolution of partially coherent pulses (PCPs) in nonlinear dispersive media. However, these methods are restricted to the Schell model type. Non-Schell model light has attracted growing attention in recent years for its distinctive characteristics, such as self-focusing, self-shifting, and non-diffraction properties as well as its critical applications in areas such as particle trapping and information encryption. In this study, we incorporate the Monte Carlo method into the pseudo-mode superposition method to derive the random electric field of any PCPs, including non-Schell model pulses (nSMPs). By solving the nonlinear Schrödinger equations through numerical simulations, we systematically explore the propagation dynamics of nSMPs in nonlinear dispersive media. By leveraging the nonlinearity and optical coherence, this approach allows for effective control over the focal length, peak power, and full width at half the maximum of the pulses. We believe this method offers valuable insights into the behavior of coherence-related phenomena in nonlinear dispersive media, applicable to both temporal and spatial domains. Full article

In the simulation of partially coherent light propagation within optical systems utilizing the Wigner function, the constraints imposed by the Fourier transform necessitate that the dimensions of the input and output matrices remain congruent. Consequently, the extent of the image plane is dictated by the dimensions of the light source matrix and the propagation distance. For optical systems of greater complexity, such simulations are highly memory-intensive. This paper innovatively incorporates the displacement theorem of the chirp z-transform and integrates it with the Wigner function. This approach affords enhanced flexibility in the simulation of partially coherent light transmission, enabling the targeted simulation of regions of interest within the frequency domain of the optical system, thereby significantly improving simulation efficiency. The efficacy of this novel method is demonstrated through the simulation of a Wigner transmission algorithm based on the chirp z-transform, applied to an RC (Ritchey–Chrétien) telescope system. The RC telescope, known for its optical design that minimizes aberrations and provides high-quality imaging, serves as a critical foundation for the simulation. The resultant simulations exhibit a high degree of consistency with traditional methods while offering increased flexibility, thus corroborating the validity and effectiveness of the proposed approach. Full article

Any calculation of thin film optical spectra requires the formulation of certain model assumptions. In general, those model assumptions concern geometrical features as well as material properties. We review important facets of the thin film optics’ “standard model” that provides the basis of generally accepted relevant modern spectra calculation routines. Moreover, we discuss phenomena arising when certain model assumptions are violated. Examples are provided by the Goos–Hänchen shift, the polarization leakage, interaction with partially coherent light, rough surfaces, as well as the emergence of thickness-dependent, time-dependent, or non-linear optical material parameters. Corresponding challenges in coating characterization and design are discussed, and future prospects are identified. Full article

Laser, an acronym for Light Amplification by Stimulated Emission of Radiation, is a powerful tool with diverse applications in modern dentistry. It emits monochromatic, coherent light resulting from photon-induced chain reactions. Available dental lasers include diode, argon, Er,Cr:YSGG, Er:YAG, Nd:YAG, and CO₂. The unique property of these lasers, allowing them to be effectively used on both soft and hard tissues based on the operational parameters, positions them as particularly suited for a wide range of dental procedures. Compared to traditional methods, lasers offer advantages such as improved hemostasis and quicker wound healing. Such benefits stress the shift towards laser technology in dental treatment. In the realm of dental prosthodontics, which focuses on esthetics, functionality, and the physiological aspects of dental prostheses, lasers provide promising outcomes. Among the prosthetic options, fixed partial dentures stand out for their ability to mimic natural teeth, offering both esthetic and functional features, leading to satisfactory long-term outcomes if managed properly. This review paper delves into the specific application of laser technology in the context of prosthetic rehabilitation involving fixed partial dentures. By investigating intraoral laser procedures, it contributes to understanding laser’s role in improving patients’ satisfaction and clinical efficiency in this field. Full article

We have recently demonstrated that the 3D shape of micro-parts can be measured using LED illumination based on speckle contrast evaluation in the recently developed SPICE profilometry (shape measurements based on imaging with spatially partially coherent illumination). The main advantage of SPICE is its improved robustness and measurement speed compared to confocal or white light interferometry. The limited spatial coherence of the LED illumination is used for depth discrimination. An electrically tunable lens in a $4f$-configuration is used for fast depth scanning without mechanically moving parts. The approach is efficient, takes less than a second to capture required images, is eye-safe and offers a depth of focus of a few millimeters. However, SPICE’s main limitation is its assumption of a small illumination aperture. Such a small illumination aperture affects the axial scan resolution, which dominates the measurement uncertainty. In this paper, we propose a novel method to overcome the aperture angle limitation of SPICE by illuminating the object from different directions with several independent LED sources. This approach reduces the full width at half maximum of the contrast envelope to one-eighth, resulting in a twofold improvement in measurement accuracy. As a proof of concept, shape measurements of various metal objects are presented. Full article

The full Poincaré (FP) beam, encompassing all possible polarization states in its beam cross-section, has demonstrated advantages in various applications. However, conventional FP beams are typically considered as spatially fully coherent, rendering them sensitive to disturbances in the propagation path and susceptible to speckle effects. In this work, we propose an alternative approach to synthesize the optical beam with a FP polarization state through the spatial coherence engineering of a partially coherent beam. In this process, the FP polarization state is initially encoded into the spatial coherence structure of the beam source. We demonstrate that during the encoding process, the vector nature of the beam transitions from the FP polarization state to the spatial coherence structure of the source. However, during the propagation of the partially coherent beam, the vectorness reverts to the polarization state, resulting in the re-emergence of the encoded FP polarization in the output plane. We illustrate that the synthesized FP polarization state, achieved through spatial coherence engineering, is highly robust against obstructions in the propagation path. Furthermore, we examine the effect of the spatial coherence area of the beam on the quality of the recovered FP polarization state. The findings of this work can have valuable applications in optical trapping and optical imaging in complex environments. Full article

Monolayer graphene absorbs 2.3 percent of the incident visible light. This “small” absorption has been used to emphasize the visual transparency of graphene, but it in fact means that multilayer graphene absorbs a sizable fraction of incident light, which causes non-negligible fluorescence. In this paper, we formulate the light emission properties of multilayer graphene composed of tens to hundreds of layers using a transfer matrix method and confirm the method’s validity experimentally. We quantitatively explain the measured contrasts of multilayer graphene on SiO₂/Si substrates and find sizable corrections, which cannot be classified as incoherent light emissions, to the reflectance of visible light. The new component originates from coherent emission caused by absorption at each graphene layer. Multilayer graphene thus functions as a partial coherent light source of various wavelengths, and it may have surface-emitting laser applications. Full article

When coherent detection occurs, the polarization mismatch between signal light and local oscillator light can reduce the efficiency of coherent detection. This article combines the principle of optical mixers to derive the relationship between the polarization state and mixing efficiency of signal light and local oscillator light, and builds an experimental platform for the coherent detection of a partially coherent electromagnetic Gaussian Schell beam (EGSM). Polarization devices are used to regulate the polarization state of the signal EGSM light and local oscillator EGSM light, and different polarization states of the EGSM beams are generated. When the output power of the signal light is constant, the mixing efficiency is measured according to the output amplitude of the intermediate frequency signal. This experiment found that when the signal light is in a linearly polarized state and the local oscillator light is in a linearly polarized state, a circularly polarized state, or an elliptically polarized state, the amplitude of the intermediate frequency signal is 369.6 mv, 146.6 mv, or 92.1 mv, respectively. When the signal light is in a circularly polarized state, the amplitude of the intermediate frequency signal is 446.4 mv, 504.0 mv, or 159.2 mv, respectively. When the signal light is in an elliptical polarization state, the amplitude of the intermediate frequency signal is 94.4 mv, 124.0 mv, or 254.8 mv, respectively. Full article

The development and investigation of miniature narrow-line coherent light sources based on microresonators with low-power-consumption whispering gallery modes (WGMs) is an actual trend in modern photonics. Raman WGM microlasers can operate at wavelengths inaccessible to traditional laser media and provide a huge pump frequency tuning range. Here, we propose and theoretically study multicascade Raman microlasers based on soft tellurite TeO₂–WO₃–Bi₂O₃ glass WGM microresonators (microspheres) which can operate in the near-IR and mid-IR with the pump in the telecommunication range. Thanks to a large Raman gain (120 times exceeding the maximum Raman gain of silica glass) and a huge Raman frequency shift of 27.5 THz for this glass, the Raman waves at 1.83 µm, 2.21 µm, 2.77 µm, and 3.7 µm in the first, second, third, and fourth cascades, respectively, are theoretically demonstrated with a pump at 1.57 µm. We analyze in detail the influence of different factors on the characteristics of the generated Raman waves, such as microsphere diameters, Q-factors, pump powers, and detuning of the pump frequency from exact resonance. We also solve a thermo-optical problem to show that the temperature of a soft glass microresonator heated due to partial thermalization of pump power remains below the glass transition temperature. To the best of our knowledge, mid-IR tellurite glass Raman WGM microlasers have not been studied before. Full article

Background and Objectives: To report a case of microbial keratitis complicated by severe corneal melting and whole corneal descemetocele. Methods: A 72-year-old male farmer presented with a right corneal ulcer involving nearly the entire cornea, which was almost completely melted down with the remaining Descemet’s membrane (DM). The pupil area was filled with melted necrotic material, with the intraocular lens partially protruding from the pupil and indenting the DM. Corneal optical coherence tomography (OCT) examination revealed a corneal thickness of 37 µm that was attached to its back surface, with the iris and a part of the intraocular lens (IOL) protruding through the pupil. The patient was hospitalized and treated with local and systemic antibiotics until control of the inflammation was achieved. Corneoscleral transplantation plus excision/transplantation of the corneal limbus were performed, and the entire corneal limbus was lamellarly incised. After completely suturing all around the transplanted corneoscleral graft, the anterior chamber was formed. Postoperative treatment included local antibiotics, anti-inflammatory drugs, and cycloplegic drops. Results: There was no recurrence of infection, and the corneal epithelium gradually regenerated and covered the whole graft. Visual acuity was light perception at 6 months after the surgery. The patient was satisfied that the globe was preserved and did not wish to undergo any further treatment. Conclusions: Corneoscleral transplantation is preferred for the treatment of large-sized descemetoceles with active microbial keratitis and extensive infiltrates, especially in cases where the whole cornea has transformed into a large cyst. Full article

The generation of coherent light based on inelastic stimulated Raman scattering in photonic microresonators has been attracting great interest in recent years. Tellurite glasses are promising materials for such microdevices since they have large Raman gain and large Raman frequency shift. We experimentally obtained Raman lasing at a wavelength of 1.8 µm with a frequency shift of 27.5 THz from a 1.54 µm narrow-line pump in a 60 µm tellurite glass microsphere with a Q-factor of 2.5 × 10⁷. We demonstrated experimentally a robust, simple, and cheap way of thermo-optically controlled on/off switching of Raman lasing in a tellurite glass microsphere by an auxiliary laser diode. With a permanently operating narrow-line pump laser, on/off switching of the auxiliary 405 nm laser diode led to off/on switching of Raman generation. We also performed theoretical studies supporting the experimental results. The temperature distribution and thermal frequency shifts in eigenmodes in the microspheres heated by the thermalized power of an auxiliary diode and the partially thermalized power of a pump laser were numerically simulated. We analyzed the optical characteristics of Raman generation in microspheres of different diameters. The numerical results were in good agreement with the experimental ones. Full article

Underwater LED light sources are commonly implemented in array configurations with a wide-angle field of view, primarily catering to high-speed communication within a few meters. To increase transmission distance and mitigate oceanic turbulence effects, this paper focuses on the spatial coherence analysis of narrow-beam partially coherent light-emitting diode (PCLED) arrays, examining their average light intensity distribution, beam width, and spatial coherence during oceanic transmission. Based on the extended Huygens–Fresnel integral, the optical field models and spatial characteristics of the radial PCLED array are derived under oceanic conditions, considering parameters such as water attenuation coefficient, kinetic energy dissipation rate, temperature dissipation rate, temperature-to-salinity ratio, as well as the radial filling factor and the sub-beam spatial coherence length of the light source at different transmission distances. The simulations show that, as the spatial coherence length of the sub-beam decreases from hundreds to a few micrometers, the combining distance of the beam arrays also decreases. This reduction in coherence results in the average light intensity distribution degrading into a Gaussian-like distribution, with a significant five-fold decrease in peak intensity. Furthermore, the width of the array spreads, starting from distances of 7 m and 0 m, respectively. The radial PCLED beam array, with its sub-beam spatial coherence length inside micrometers, possesses inherent characteristics that suppress turbulence effects and has future extensive possibilities in the ocean. Full article

The mouse model of laser-induced choroidal neovascularization (LI-CNV) has been widely used to study neovascular age-related macular degeneration; however, it still lacks a comprehensive characterization. Here, CNV was induced in the eyes of 12-week-old C57BL/6J male mice by argon laser irradiation. We studied the CNV lesion progression of an LI-CNV mouse cohort by using multimodal imaging (color fundus, optical coherence tomography (OCT), and fluorescence angiography, focal electroretinography features for 14 days, and related cytokines, angiogenic factors, and reactive gliosis for 5 days. CNV lesions involving the rupture of the Bruch’s membrane were confirmed using funduscopy and OCT after laser photocoagulation. During the initial stage, from the CNV induction until day 7, CNV lesions presented leakage observed by using fluorescence angiography and a typical hyperreflective area with cell infiltration, subretinal leakage, and degeneration of photoreceptors observed through OCT. This correlated with decreased retinal responses to light. Moreover, inflammatory and angiogenic markers were reduced to basal levels in the first 5 days of CNV progression. In contrast, reactive gliosis and the VEGF expression in retinal sections were sustained, with infiltration of endothelial cells in the subretinal space. In the second stage, between days 7 and 14 post-induction, we observed stabilization of the CNV lesions, a hyperfluorescent area corresponding to the formation of fibrosis, and a partial rescue of retinal function. These findings suggest that the LI-CNV lesion development goes through an acute phase during the first seven days following induction, and then the CNV lesion stabilizes. According to these results, this model is suitable for screening anti-inflammatory and anti-angiogenic drugs in the early stages of LI-CNV. At the same time, it is more convenient for screening anti-fibrotic compounds in the later stages. Full article

This study explored the impact of atmospheric turbulence on partially coherent light propagation. Atmospheric turbulence causes random modulation of the intensity and phase of light, resulting in a speckle pattern in the far field. This study focused on partially coherent Gaussian Schell model beams and derived an analytical expression of the cross-spectral density function for their transmission through atmospheric turbulence, based on the generalized Huygens–Fresnel principle and the Tatarski spectrum model. Numerical simulations were used to investigate the effects of the source parameters and turbulence strength on the intensity distribution, beam width, and coherence length of partially coherent light in horizontal atmospheric transmission. The results demonstrate that diffraction-induced broadening primarily affects the intensity distribution of light in free-space transmission. Short transmission distances in atmospheric turbulence have comparable characteristics to those in a vacuum; however, as the turbulence intensity and transmission distance increase, the beam broadening effect amplifies, and the coherence length is reduced. The findings are relevant to the design of acquisition, pointing, and tracking systems for wireless laser communication systems and offer insights into the optimization of optical systems for atmospheric conditions. Full article