Search Results (9)

Background: Self-administered orally dissolving films (ODFs) encapsulating inactivated influenza vaccines represent an effective strategy for stimulating mucosal immunity. While this vaccination method offers several advantages over conventional influenza vaccines, a comparative efficacy study remains lacking. Methods: Female BALB/c mice were immunized with inactivated A/PR/8/34 (H1N1) either via orogastric inoculation or through the oral mucosal delivery using pullulan and trehalose-based ODF vaccines. Each group received equivalent antigen doses across three immunizations. Humoral responses and antibody functionality were assessed using sera collected post-immunization. After lethal viral challenge, other immunological and virological parameters were determined in corresponding tissues. Body weight and survival were monitored over a 14-day period after challenge. Results: ODF vaccination elicited significantly higher virus-specific IgA levels, HAI titers, and neutralizing antibody activity than oral gavage. After the viral challenge, ODF-immunized mice exhibited stronger IgG and IgA responses in respiratory tissues, increased antibody-secreting cells in lungs and spleen, and elevated germinal center B cells and CD8⁺ T cell responses. Both vaccination methods reduced lung pro-inflammatory cytokines and provided full protection against lethal challenge; however, the ODF group showed lower cytokine levels, better weight maintenance, and reduced viral loads. Conclusions: ODF vaccination elicits more robust systemic and mucosal immune responses than oral vaccination and may serve as a promising alternative method of influenza vaccine delivery. Full article

Over the years, research regarding the Zika virus has been steadily increasing. Early immunization for ZIKV is a priority for preventing complications such as microencephaly and Guillain–Barré syndrome (GBS). Unlike traditional vaccination approaches, oral dissolving films (ODFs) or mucoadhesive film technology is an emerging, exciting concept that can be used in the field of pharmaceuticals for vaccine design and formulation development. This attractive and novel method can help patients who suffer from dysphagia as a complication of a disease or syndrome. In this study, we investigated a microparticulate Zika vaccine administered via the buccal route with the help of thin films or oral dissolving films (ODFs) with a prime dose and two booster doses two weeks apart. In vitro, the ODFs displayed excellent physiochemical properties, indicating that the films were good carriers for vaccine microparticles and biocompatible with the buccal mucosa. In vivo results revealed robust humoral (IgG, subtypes IgG1 and IgG2a) and T-cell responses (CD4+/CD8+) for ZIKV-specific immunity. Both the Zika MP vaccine and the adjuvanted Zika MP vaccine affected memory (CD45R/CD27) and intracellular cytokine (TNF-α and IL-6) expression. In this study, ZIKV vaccination via the buccal route with the aid of ODFs demonstrated great promise for the development of pain-free vaccines for infectious diseases. Full article

Orodispersible films (ODFs) are thin, mechanically strong, and flexible polymeric films that are designed to dissolve or disintegrate rapidly in the oral cavity for local and/or systemic drug delivery. This review examines various aspects of ODFs and their potential as a drug delivery system. Recent advancements, including the detailed exploration of formulation components, such as polymers and plasticizers, are briefed. The review highlights the versatility of preparation methods, particularly the solvent-casting production process, and novel 3D printing techniques that bring inherent flexibility. Three-dimensional printing technology not only diversifies active compounds but also enables a multilayer approach, effectively segregating incompatible drugs. The integration of nanoparticles into ODF formulations marks a significant breakthrough, thus enhancing the efficiency of oral drug delivery and broadening the scope of the drugs amenable to this route. This review also sheds light on the diverse in vitro evaluation methods utilized to characterize ODFs, ongoing clinical trials, approved marketed products, and recent patents, providing a comprehensive outlook of the evolving landscape of orodispersible drug delivery. Current patient-centric approaches involve developing ODFs with patient-friendly attributes, such as improved taste masking, ease of administration, and enhanced patient compliance, along with the personalization of ODF formulations to meet individual patient needs. Investigating novel functional excipients with the potential to enhance the permeation of high-molecular-weight polar drugs, fragile proteins, and oligonucleotides is crucial for rapid progress in the advancing domain of orodispersible drug delivery. Full article

Recent advancements in 3D printing technology have integrated with Fourth Industrial Revolution technologies such as robotics and artificial intelligence, aiming to overcome the limitations of conventional manufacturing methods. In the field of functional foods, solvent casting, a common manufacturing technique, has been adopted to produce film-like structures with desired sizes and uniform thickness. However, the typical method of coating or injection on a conventional continuous film is difficult to produce in small amounts. To address this limitation, in the study, we developed a pneumatic pressure syringe-type dispensing system integrated with a food 3D printer utilizing fused deposition modeling (FDM) technology. A syringe type is needed to discharge crude liquid manufactured in the food field in a hygienic environment, and a 3D printing method that is easy to manufacture in small quantities or on demand was utilized. Through simulation and experiment, we wanted to confirm whether stable ejection results are generated according to the selected nozzle-based viscosity, inflow conditions, and the nozzle movement path of the food 3D printer. Based on the nozzle selected through simulation, it was confirmed that the fluid and flow velocity distribution of the viscous material were uniformly distributed and discharged under the conditions of 30,000 cps and inflow rate. By setting the parameters of the food 3D printer and preparing a coenzyme Q10 (CoQ10) sample, we achieved a stable oral dissolving film (ODF) extrusion shape through the design of viscosity and 3D printer nozzle path. The optimal viscosity range for the ODF solution was found to be 25,000 to 35,000 cps, exhibiting precise dimensions and shapes without distortion and yielding the most stable extrusion results. We defined four different nozzle path designs based on minimizing the movement of the 3D printer nozzle. Among them, a 16-step path design demonstrated a stable extrusion method, showing no tailing phenomenon under the conditions of 0.2 MPa pressure and −15.4 KPa vacuum pressure. In future research, we plan to conduct additional research to determine whether the discharge results vary depending on conditions such as viscosity of the crude liquid, nozzle path combination, and ODF thickness. Full article

Orodispersible films (ODFs) are solid pharmaceutical forms for rapid local or systemic release of active ingredients. They are formed by a water-soluble polymer film that hydrates rapidly, adhering and dissolving immediately when placed on the tongue or in the oral cavity. In this paper, we describe the compatibility and disintegration times of compounded ODFs using OrPhyllo^TM, a new ready-to-use-vehicle, and APIs from different pharmacological classes, such as 5-hydroxytryptophan (5-HTP) 50 mg, bromopride 5 mg, coenzyme Q10 20 mg, melatonin 3 mg, resveratrol 5 mg, tadalafil 10 mg, vitamin B12 1 mg, or vitamin D3 2000 UI. ODFs were compounded and, subsequently, the samples were assayed using HPLC at initial (t = 0), 7 days (t = 7), 14 days (t = 14), 30 days (t = 30), 60 days (t = 60), 90 days (t = 90), 120 days (t = 120), 150 days (t = 150), and 180 days (t = 180) after compounding. Given the percentage of recovery of the APIs within the films, the beyond-use date of the final products (API + vehicle) was at least 90 days for vitamin D3, 150 days for bromopride and 5-HTP, and 180 days for coenzyme Q10, tadalafil, vitamin B12, resveratrol, and melatonin, when stored at room temperature. The average disintegration time was 46.22 s. This suggests that the OrPhyllo^TM vehicle is suitable for compounding ODFs with APIs from different pharmacological classes, with good compatibility and fast disintegration. Full article

Orodispersible film (ODF) is an innovative dosage form used to administer drugs and nutrients, designed to disintegrate or dissolve in the oral cavity without needing water. One of the advantages of ODF is that it is suitable for administration in older people and children who have difficulty swallowing because of psychological or physiological deficiencies. This article describes the development of an ODF based on maltodextrin, which is easy to administer, has a pleasant taste, and is suitable for iron supplementation. An ODF containing 30 mg of iron as pyrophosphate and 400 µg of folic acid (iron ODF) was developed and manufactured on an industrial scale. The kinetic profile for serum iron and folic acid upon consumption of ODF compared with a Sucrosomial^® iron capsule (known for its high bioavailability) was evaluated in a crossover clinical trial. The study was conducted in nine healthy women, and the serum iron profile (AUC_0–8, T_max, and C_max) of both formulations was defined. Results showed that the rate and extent of elemental iron absorption with iron ODF was comparable to that obtained using the Sucrosomial^® iron capsule. These data represent the first evidence of iron and folic acid absorption concerning the newly developed ODF. Iron ODF was proven to be a suitable product for oral iron supplementation. Full article

Oral, quick response, and on demand, also known as a spontaneous oral treatment for erectile dysfunction, is highly needed by both patients and physicians. Vardenafil is selective (fewer side effects) and more effective in difficult-to-treat conditions than sildenafil. This study aims at fostering the dual objectives of using biomolecules such as artificial sweetening agents to solubilize and mask the bitterness of vardenafil loaded on biodegradable polymeric materials (PVA, MC, SA, and PVP K30) to fabricate oral, fast-dissolving films (vardenafil ODFs) in the mouth without the need for water to ingest the dosage form. Furthermore, coprecipitated-dispersed mixtures of vardenafil and three sweeteners (sorbitol, acesulfame K, and sucralose) were prepared and characterized using FTIR, DSC, and solubility studies. Moreover, eight different vardenafil ODFs were prepared using the solvent-casting method. Modified gustatory sensation test, in vitro disintegration, and release studies were performed. In addition, the optimized ODF (F8) was compared with the commercial film-coated tablets pharmacokinetically (relative bioavailability, onset, and duration of actions were estimated). The results indicated that the three sweetening agents had comparable solubilizing capacity. However, both sucralose- and acesulfame K-based ODFs have a more enhanced sweet and palatable taste than sorbitol-sweetened ODF. The SA- and PVP K30-based ODFs showed significantly faster disintegration times and release rates than MC. In conclusion, PVA has good film-forming properties, but a higher ratio of PVA adversely affected the disintegration and release characteristics. The % relative bioavailability for ODF was 126.5%, with a superior absorption rate constant (Ka) of 1.2-fold. The C_max and estimated T_max were compared to conventional film-coated tablets. Full article

The development of oral dissolving film (ODF) of atenolol is an attempt to enhance convenience and compliance for geriatric patients suffering from hypertension. Film former is the most essential component in ODF that determines the physical characteristic and drug release. In this study, three different types of film former including HPMC E5 4% (w/v), 5% (w/v), CMC-Na 3% (w/v), 4% (w/v), and Na-alginate 2.5% (w/v), 3% (w/v) were optimized in Formula 1 (F1) to Formula 6 (F6), respectively. A solvent casting method was employed to develop ODF of atenolol. The films formed by HPMC E5 produced a smooth and flexible surface, whereas CMC-Na and Na-alginate produced gritty textured films. Satisfactory results were obtained from several physical parameters such as film thickness, folding endurance, swelling index, and disintegration time. The homogeneity, drug content, and dissolution properties of ODF with HPMC exhibited better characteristics than the other formulas. Formula 1 exhibited the highest drug release compared to the other ODFs. The molecular docking results showed that there was a hydrogen bonding between atenolol and film formers which was also supported by the FTIR spectrum. The findings of this study suggest that HPMC E5 is the most favorable film former for ODF of atenolol. Full article

Amorphous solid dispersions (ASDs) improve the oral delivery of poorly water-soluble drugs. ASDs of olanzapine (OLZ), which have a high melting point and low solubility, are performed using a complicated process. Three-dimensional (3D) printing based on hot-melt pneumatic extrusion (HMPE) is a simplified method for producing ASDs. Unlike general 3D printing, printlet extrusion is possible without the preparation of drug-loaded filaments. By heating powder blends, direct fused deposition modeling (FDM) printing through a nozzle is possible, and this step produces ASDs of drugs. In this study, we developed orodispersible films (ODFs) loaded with OLZ as a poorly water-soluble drug. Various ratios of film-forming polymers and plasticizers were investigated to enhance the printability and optimize the printing temperature. Scanning electron microscopy (SEM) showed the surface morphology of the film for the optimization of the polymer carrier ratios. Differential scanning calorimetry (DSC) was used to evaluate thermal properties. Powder X-ray diffraction (PXRD) confirmed the physical form of the drug during printing. The 3D printed ODF formulations successfully loaded ASDs of OLZ using HMPE. Our ODFs showed fast disintegration patterns within 22 s, and rapidly dissolved and reached up to 88% dissolution within 5 min in the dissolution test. ODFs fabricated using HMPE in a single process of 3D printing increased the dissolution rates of the poorly water-soluble drug, which could be a suitable formulation for fast drug absorption. Moreover, this new technology showed prompt fabrication feasibility of various formulations and ASD formation of poorly water-soluble drugs as a single process. The immediate dissolution within a few minutes of ODFs with OLZ, an atypical antipsychotic, is preferred for drug compliance and administration convenience. Full article