Search Results (8)

Severe skin damage poses a significant clinical challenge, as limited availability of skin donors, postoperative skin defects, and scarring often impair skin function. Traditional two-dimensional (2D) nanofibers exhibit small pore sizes that hinder cellular infiltration, unable to simulate the three-dimensional (3D) structure of the skin. To address these issues, we developed 3D porous nanofiber scaffolds composed of polycaprolactone–polylactic acid–mussel adhesive protein (PLGA-PCL-MAP) using low-temperature electrospinning combined with nano-spray technology. Meanwhile, this 3D scaffold features high porosity, enhanced water absorption, and improved air permeability. The incorporation of mussel adhesive protein (MAP) further increased the scaffold’s adhesive properties and biocompatibility. In vitro experiments demonstrated that the 3D nanofiber scaffolds significantly promoted the adhesion, proliferation, and migration of epidermal keratinocytes (HaCaTs) and human fibroblasts (HFBs), while providing ample space for inward cellular growth. Successful co-culture of HaCaT and HFBs within the scaffold revealed key functional outcomes: HaCaTs expressed keratinocyte differentiation markers CK10 and CK14, while HFBs actively secreted extracellular matrix components critical for wound healing, including collagen I, collagen III, and fibronectin. This skin substitute with a composite structure of epidermis and dermis based on three-dimensional nanofiber scaffolds can be used as an ideal skin replacement and is expected to be applied in wound repair in the future. Full article

Many anti-microbial peptides (AMPs) and pro-apoptotic peptides are considered as novel anti-microbial agents, distinguished by their different characteristics. Nevertheless, AMPs exhibit certain limitations, including poor stability and potential toxicity, which hinder their suitability for applications in pharmaceutics and medical devices. In this study, we used recombinant mussel adhesive protein (MAP) as a robust scaffold to overcome these limitations associated with AMPs. Mussel adhesive protein fused with functional peptides (MAP-FPs) was used to evaluate anti-microbial activities, minimal inhibitory concentration (MIC), and time-kill kinetics (TKK) assays against six of bacteria strains. MAP and MAP-FPs were proved to have an anti-microbial effect with MIC of 4 or 8 µM against only Gram-negative bacteria strains. All tested MAP-FPs killed four different Gram-negative bacteria strains within 180 min. Especially, MAP-FP-2 and -5 killed three Gram-negative bacteria strain, including E. coli, S. typhimurium, and K. pneumoniae, within 10 min. A cytotoxicity study using Vero and HEK293T cells indicated the safety of MAP and MAP-FP-2 and -3. Thermal stability of MAP-FP-2 was also validated by HPLC analysis at an accelerated condition for 4 weeks. This study identified that MAP-FPs have novel anti-microbial activity, inhibiting the growth and rapidly killing Gram-negative bacteria strains with high thermal stability and safety. Full article

Innovation in the healthcare profession to solve complex human problems has always been emulated and based on solutions proven by nature. The conception of different biomimetic materials has allowed for extensive research that spans several fields, including biomechanics, material sciences, and microbiology. Due to the atypical characteristics of these biomaterials, dentistry can benefit from these applications in tissue engineering, regeneration, and replacement. This review highlights an overview of the application of different biomimetic biomaterials in dentistry and discusses the key biomaterials (hydroxyapatite, collagen, polymers) and biomimetic approaches (3D scaffolds, guided bone and tissue regeneration, bioadhesive gels) that have been researched to treat periodontal and peri-implant diseases in both natural dentition and dental implants. Following this, we focus on the recent novel application of mussel adhesive proteins (MAPs) and their appealing adhesive properties, in addition to their key chemical and structural properties that relate to the engineering, regeneration, and replacement of important anatomical structures in the periodontium, such as the periodontal ligament (PDL). We also outline the potential challenges in employing MAPs as a biomimetic biomaterial in dentistry based on the current evidence in the literature. This provides insight into the possible increased functional longevity of natural dentition that can be translated to implant dentistry in the near future. These strategies, paired with 3D printing and its clinical application in natural dentition and implant dentistry, develop the potential of a biomimetic approach to overcoming clinical problems in dentistry. Full article

Mussels secrete protein-based byssal threads to tether to rocks, ships, and other organisms underwater. The secreted marine mussel adhesive proteins (MAPs) contain the peculiar amino acid L-3,4-dihydroxyphenylalanine (DOPA), whose catechol group content contributes greatly to their outstanding adhesive properties. Inspired by such mussel bioadhesion, we demonstrate that catechol-modified polysaccharides can be used to obtain adhesive membranes using the compaction of polyelectrolyte complexes (CoPEC) method. It is a simple and versatile approach that uses polyelectrolyte complexes as building blocks that coalesce and dry as membrane constructs simply as a result of sedimentation and mild temperature. We used two natural and biocompatible polymers: chitosan (CHI) as a polycation and hyaluronic acid (HA) as a polyanion. The CoPEC technique also allowed the entrapment of ternary bioactive glass nanoparticles to stimulate mineralization. Moreover, combinations of these polymers modified with catechol groups were made to enhance the adhesive properties of the assembled membranes. Extensive physico-chemical characterization was performed to investigate the successful production of composite CoPEC membranes in terms of surface morphology, wettability, stability, mechanical performance, in vitro bioactivity, and cellular behavior. Considering the promising properties exhibited by the obtained membranes, new adhesives suitable for the regeneration of hard tissues can be envisaged. Full article

Freestanding films based on catechol functionalized chitosan (CHI), hyaluronic acid (HA), and bioglass nanoparticles (BGNPs) were developed by spin-coating layer-by-layer assembly (SA-LbL). The catechol groups of 3,4-dihydroxy-l-phenylalanine (DOPA) present in the marine mussels adhesive proteins (MAPs) are the main factors responsible for their characteristic strong wet adhesion. Then, the produced films were cross-linked with genipin to improve their stability in wet state. Overall, the incorporation of BGNPs resulted in thicker and bioactive films, hydrophilic and rougher surfaces, reduced swelling, higher weight loss, and lower stiffness. The incorporation of catechol groups onto the films showed a significant increase in the films’ adhesion and stiffness, lower swelling, and weight loss. Interestingly, a synergetic effect on the stiffness increase was observed upon the combined incorporation of BGNPs with catechol-modified polymers, given that such films were the stiffest. Regarding the biological assays, the films exhibited no negative effects on cellular viability, adhesion, and proliferation, and the BGNPs seemed to promote higher cellular metabolic activity. These bioactive LbL freestanding films combine enhanced adhesion with improved mechanical properties and could find applications in the biomedical field, such as guided hard tissue regeneration membranes. Full article

Mussel adhesive proteins (MAPs) have a unique ability to firmly adhere to different surfaces in aqueous environments via the special amino acid, 3,4-dihydroxyphenylalanine (DOPA). The catechol groups in DOPA are a key group for adhesive proteins, which is highly informative for the biomedical domain. By simulating MAPs, medical products can be developed for tissue adhesion, drug delivery, and wound healing. Hydrogel is a common formulation that is highly adaptable to numerous medical applications. Based on a discussion of the adhesion mechanism of MAPs, this paper reviews the formation and adhesion mechanism of catechol-functionalized hydrogels, types of hydrogels and main factors affecting adhesion, and medical applications of hydrogels, and future the development of catechol-functionalized hydrogels. Full article

This articles reports a simple and green method for preparing uniform silver nanoparticles (AgNPs), for which self-polymerized 3,4-dihydroxy-l-phenylalanine (polyDOPA) is used as the reducing and stabilizing agent in aqueous media. The AgNPs functionalized by polyDOPA were analyzed by UV–Vis spectroscopy, high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), Raman spectrophotometry, and X-ray diffraction (XRD) techniques. The results revealed that the polyDOPA-AgNPs with diameters of 25 nm were well dispersed due to the polyDOPA. It was noted that the polyDOPA-AgNPs showed selectivity for Pb²⁺ and Cu²⁺ detection with the detection limits for the two ions as low as 9.4 × 10⁻⁵ and 8.1 × 10⁻⁵ μM, respectively. Therefore, the polyDOPA-AgNPs can be applied to both Pb²⁺ and Cu²⁺ detection in real water samples. The proposed method will be useful for colorimetric detection of heavy metal ions in aqueous media. Full article

The substance secreted by mussels, also known as nature’s glue, is a type of liquid protein that hardens rapidly into a solid water-resistant adhesive material. While in seawater or saline conditions, mussels can adhere to all types of surfaces, sustaining its bonds via mussel adhesive proteins (MAPs), a group of proteins containing 3,4-dihydroxyphenylalanine (DOPA) and catecholic amino acid. Several aspects of this adhesion process have inspired the development of various types of synthetic materials for biomedical applications. Further, there is an urgent need to utilize biologically inspired strategies to develop new biocompatible materials for medical applications. Consequently, many researchers have recently reported bio-inspired techniques and materials that show results similar to or better than those shown by MAPs for a range of medical applications. However, the susceptibility to oxidation of 3,4-dihydroxyphenylalanine poses major challenges with regard to the practical translation of mussel adhesion. In this review, various strategies are discussed to provide an option for DOPA/metal ion chelation and to compensate for the limitations imposed by facile 3,4-dihydroxyphenylalanine autoxidation. We discuss the anti-proliferative, anti-inflammatory, anti-microbial activity, and adhesive behaviors of mussel bio-products and mussel-inspired materials (MIMs) that make them attractive for synthetic adaptation. The development of biologically inspired adhesive interfaces, bioactive mussel products, MIMs, and arising areas of research leading to biomedical applications are considered in this review. Full article