Search Results (293)

Accurate characterization of oleosome particle size distribution is needed for understanding their functionality in various applications. Traditionally, high-cost methods such as static laser diffraction and confocal or electron microscopy have been used. The current study presents a cost-effective alternative by combining optical microscopy (OM) with image analysis and dynamic light scattering (DLS) to evaluate particle size distribution in safflower (Carthamus tinctorius) oleosomes. Monodisperse and polydisperse standards (2 µm and 1–10 µm, respectively) were selected to validate instrument performance. The use of a smaller cuvette with a shorter path length in DLS extended its detection capabilities by minimizing multiple scattering and thermal effects. DLS and OM produced relatively consistent results, accurate particles’ diameters and distribution widths that agreed well with the standards. In contrast, static light scattering (SLS) showed strong sensitivity to the weighting method used (by number vs. by volume). In the case of polydisperse standard, volume-weighted SLS overestimated the particle size and yielded a broader distribution with a span of 2.2 compared to a span value of 0.8 as reported by the supplier. These findings highlight the importance of method selection and demonstrate the potential of combining DLS and OM as a practical and reliable approach for oleosome characterization. Full article

Background/Objectives: Photothermal therapy (PTT) is an emerging minimally invasive strategy in biomedicine that converts near-infrared (NIR) light into localized heat for the targeted inactivation of pathogens and tumor cells. Methods and Results: In this study, we report the synthesis and characterization of thermoresponsive nanogels composed of poly (N-isopropylacrylamide-co-N-isopropylmethylacrylamide) (PNIPAM-co-PNIPMAM) semi-interpenetrated with polypyrrole (PPy), yielding monodisperse particles of 377 nm diameter. Spectroscopic analyses—including ¹H-NMR, FTIR, and UV-Vis—confirmed successful copolymer formation and PPy incorporation, while TEM images revealed uniform spherical morphology. Differential scanning calorimetry established a volumetric phase transition temperature of 38.4 °C, and photothermal assays demonstrated a ΔT ≈ 10 °C upon 10 min of 850 nm NIR irradiation. In vitro antimicrobial activity tests against Pseudomonas aeruginosa (ATCC 15692) showed a dose-time-dependent reduction in bacterial viability, with up to 4 log CFU/mL. Additionally, gentamicin-loaded nanogels achieved 38.7% encapsulation efficiency and exhibited stimulus-responsive drug release exceeding 75% under NIR irradiation. Conclusions: Combined photothermal and antibiotic therapy yielded augmented bacterial killing, underscoring the potential of PPy-interpenetrated nanogels as smart, dual-mode antimicrobials. Full article

Recently, the development of nanoparticle pigments has attracted interest in chemical preparation due to their potential functional properties, such as phosphate-based pigments. The present research focuses on the feasibility of synthesising the BaCr₂(P₂O₇)₂ pigment under hydrothermal conditions. The effect of the microstructural features of ceramic pigments (the crystalline structure, morphology, and particle size) on their optical properties (colour and reflectance) was also studied. The BaCr₂(P₂O₇)₂ compound was prepared in different fluid media, including water and NaOH solutions (0.5–1.0 M), at several reaction temperatures (170–240 °C) and intervals (6–48 h). The single-phase BaCr₂(P₂O₇)₂ did not crystallise without by-products (BaCr₂O₁₀, BaCr₂(PO₇)₂) in water and the alkaline solutions, even at 240 °C for 48 h; in these fluids, the ionic Cr³⁺ species oxidised to Cr⁶⁺. In contrast, the BaCr₂(P₂O₇)₂ single-phase crystallisation was favoured by adding urea as a reductant agent (25.0–300.0 mmol). Monodispersed BaCr₂(P₂O₇)₂ fine particles with a mean size of 44.0 nm were synthesised at a low temperature of 170 °C for 6 h with 0.5 M NaOH solution in the presence of 50.0 mmol urea. The phosphate pigment particle grew to approximately 62.0 nm by increasing the treatment temperature to 240 °C. A secondary dissolution–recrystallisation achieved after 24 h triggered a change in the particle morphology coupled with the incrementation of the concentration of NaOH in the solution. The pyrophosphate BaCr₂(P₂O₇)₂ pigments prepared in this study belong to the green colour spectral space according to the CIELab coordinates measurement, and exhibit 67.5% high near-infrared (NIR) solar reflectance. Full article

Scanning surface inspection systems (SSISs) require standard wafers (SWs) with traceable particle characteristics for accurate calibration. Achieving controlled particle deposition on wafer surfaces is essential for the fabrication of such SWs. In this study, numerical simulations were conducted using Fluent to systematically investigate the effects of key deposition parameters—including nozzle diameter, nozzle-to-wafer distance, chamber volume, rotation speed, and particle size—on deposition efficiency and uniformity. Based on the simulation results, a generation–deposition system was developed, incorporating a differential mobility classifier (DMC) to produce monodisperse aerosols. The particles used in the experiments were polystyrene latex (PSL) particles with diameters of 70 nm, 100 nm, 140 nm, and 200 nm; the wafers used were 50 mm silicon wafers. Experimental validation was carried out using scanning electron microscopy (SEM) and SSISs. The optimal deposition conditions were identified as a nozzle diameter of 4 mm, nozzle-to-wafer distance of 15 mm, chamber volume greater than 657 cm³, and a rotation speed of 0.314 rad/s. Under these unified parameters, particles with diameters ≥100 nm could be effectively deposited, while smaller particles required additional adjustments. The developed system enables the preparation of SW with traceable particle sizes and uniform deposition, fulfilling the fundamental requirements for SSIS calibration. Full article

Nanoclays have gained attention in biological applications due to their biocompatibility, low toxicity, and cost-effectiveness. Layered double hydroxides (LDHs) are synthetic nanoclays that have been used as adjuvants and antigen carriers in nanovaccines developed through passive bioconjugation. However, performing active bioconjugation to bind antigens covalently and generate subunit nanovaccines remains unexplored. In this study, we investigated the synthesis, functionalization, and active conjugation of LDH nanoparticles to produce subunit nanovaccines with peptides from SARS-CoV-2. The synthesis of Mg-Al LDHs via a coprecipitation and hydrothermal treatment rendered monodisperse particles averaging 100 nm. Their functionalization with (3-aminopropyl)triethoxysilane was better than it was with other organosilanes. Glutaraldehyde was used as a linker to bind lysine as a model biomolecule to establish the best conditions for reductive amination. Finally, two peptides, P₂ and P₅ (epitopes of the SARS-CoV-2 spike protein), were bound on the surface of the LDH to produce two subunit vaccine candidates, reaching peptide concentrations of 125 and 270 µg/mL, respectively. The particles were characterized using DLS, TEM, XRD, TGA, DSC, and FTIR. The cytotoxicity studies revealed that the conjugate with P₂ was non-toxic up to 250 µg/mL, while the immunogenicity studies showed that this conjugate induced similar IgG titers to those reached when aluminum hydroxide was used as an adjuvant. Full article

Background/Objectives: Nanocarrier particle design for treating chronic pulmonary diseases presents several challenges, including anatomical and physiological barriers. Drug-repurposing technology using monodispersed spherical silica is one of the innovative ways to deliver drugs. In the present study, the anticancer potential of combinational cisplatin/ribavirin was explored for targeted lung cancer therapeutics. Methods: Monodispersed spherical silica (80 nm) capable of diffusing into the tracheal mucus region was chosen and doped with 10 wt% superparamagnetic iron oxide nanoparticles (SPIONs). Subsequently, it was wrapped with chitosan (Chi, 0.6 wt/vol%), functionalized with 5% wt/wt cisplatin (Cp)/ribavarin (Rib) and angiotensin-converting enzyme 2 (ACE-2) (1.0 μL/mL). Formulations are based on monodispersed spherical silica or halloysite and are termed as (S/MSSiO₂/Chi/Cp/Rib) or (S/Hal/Chi/Cp/Rib), respectively. Results: X-ray diffraction (XRD) and diffuse reflectance UV-visible spectroscopy (DRS-UV-vis) analysis of S/MSSiO₂/Chi/Cp/Rib confirmed the presence of SPION nanoclusters on the silica surface (45% coverage). The wrapping of chitosan on the silica was confirmed with a Fourier transformed infrared (FTIR) stretching band at 670 cm⁻¹ and ascribed to the amide group of the polymer. The surface charge by zetasizer and saturation magnetization by vibrating sample magnetometer (VSM) were found to be −15.3 mV and 8.4 emu/g. The dialysis membrane technique was used to study the Cp and Rib release between the tumor microenvironment and normal pH ranges from 5.5 to 7.4. S/MSSiO₂/Chi formulation demonstrated pH-responsive Cp and Rib at acidic pH (5.6) and normal pH (7.4). Cp and Rib showed release of ~27% and ~17% at pH 5.6, which decreases to ~14% and ~3.2% at pH 7.4, respectively. To assess the compatibility and cytotoxic effect of our nanocomposites, the cell viability assay (MTT) was conducted on cancer lung cells A549 and normal HEK293 cells. Conclusions: The study shows that the designed nanoformulations with multifunctional capabilities are able to diffuse into the lung cells bound with dual drugs and the ACE-2 receptor. Full article

The atomic level polishing of a material surface affects the accuracy of devices and the application of materials. Silica slurries play an important role in chemical mechanical polishing (CMP) by polishing the material surface. In this study, an efficient and controllable Stöber approach was developed to synthesize uniform monodisperse silica spheres with different cationic surfactants. The obtained silica spheres exhibited a regular shape with a particle size of 50–150 nm and were distributed evenly and narrowly. The highest surface specific area of the silica spheres was approximately 1155.9 m²/g, which was conducive to the polish process. The monodisperse SiO₂ spheres were applied as abrasives in chemical mechanical polishing. The surface micrographs of silicon wafers during the CMP process were studied using atomic force microscopy (AFM). The results demonstrated that the surface roughness Ra values reduced from 1.07 nm to 0.979 nm and from 1.05 nm to 0.933 nm when using a CTAB-SiO₂ microsphere as an abrasive. These results demonstrate the advantages of monodisperse SiO₂ spheres as abrasive materials in chemical mechanical planarization processes. Full article

Low-cost particulate matter sensors have seen increased use for monitoring at personal and local levels due to their affordability, ease of operation, and high time resolution. However, the quality of data reported by these sensors can be questionable, and a thorough evaluation of their performance is necessary. This study evaluated the particle sizing accuracy of several commonly used optical sensors, including the Alphasense optical particle counter (OPC), TSI DustTrak DRX aerosol monitor, Plantower PMS5003 sensor, and Sensirion SPS30 sensor, using laboratory-generated monodisperse particles. The OPC and DRX agreed partially with reference instruments and showed promise in detecting coarse-size particles. However, the PMS5003 and SPS30 did not correctly size fine and coarse particles. Furthermore, their reported mass distributions do not directly correspond to their number distribution. Despite these limitations, field measurements involving a dust storm period showed that the SPS30 correlated reasonably well with reference instruments for both PM_2.5 and PM₁₀, though the regression slopes differed significantly. These findings underscore the need for caution when interpreting data from low-cost optical sensors, particularly for coarse particles. Recommendations for improving the performance of these sensors are also provided. Full article

Background/Objectives: The combination of nanomedicine with nasal administration is of paramount importance in current research and development. Polymeric micelles coated with hyaluronic acid may be a suitable solution to enhance drug release and permeation whilst properly adhering to the nasal mucosa, increasing residence time. Methods: Solid state characterization included morphology and laser diffraction-based size analysis and X-ray powder diffraction. The characterization of dispersed polymeric micelles in aqueous media was performed based on dynamic light scattering and determining the solubility enhancement related factors such as encapsulation efficiency and thermodynamic solubility. In vitro nasal drug release and permeability studies were also conducted to characterize the different hyaluronic acid-modified polymeric micelles. Quantitative measurements were carried out via liquid chromatography. Results: Concentration dependence on hyaluronic acid was found during all measurements, with one formulation candidate overcoming the others. With a high yield above 80%, monodispersed particles were formulated with an approximately 4 µm particle size in uniform distribution and spherical morphology. The small micelle size (107.3 nm) in uniform manner led to a high encapsulation efficiency above 80% and released the drug amount above 70% in 15 min. High drug permeation was also achieved compared with the initial active substance by itself. Conclusions: A value-added polymeric micelle formulation was developed with rapid drug release and permeation kinetics alongside its high mucoadhesion. Full article

Thermal energy storage offers a viable solution for managing intermediate energy availability challenges. Phase change materials (PCMs) have been extensively studied for their capacity to store thermal energy when available and release it when needed, maintaining a narrow temperature range. However, effective utilization of PCMs requires its proper encapsulation in most applications. In this study, microcapsules containing Rubitherm^®(RT) 21 PCM (Tpeak = 21 °C, ΔH = 140 kJ/kg), which is suitable for buildings, were synthesized using a suspension polymerization technique at different operating temperatures (45–75 °C). Two different water-insoluble thermal initiators were evaluated: 2,2-Azobis (2,4-dimethyl valeronitrile) (Azo-65) and benzoyl peroxide (BPO). The prepared microcapsules were characterized using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), particle size distribution (PSD), scanning electron microscope (SEM), and optical microscopy (OM). Additionally, the microcapsules were subjected to multiple melting and freezing cycles to assess their thermal reliability and performance stability. DSC results revealed that the microcapsules using BPO exhibited a latent heat of melting comparable to those produced with Azo-65 at an operating temperature of 75 °C. However, the onset crystallization temperature for the BPO-encapsulated PCMs was approximately 2 °C lower than that of the Azo-65-encapsulated PCMs. The greatest latent heat of melting, 107.76 J/g, was exhibited by microcapsules produced at 45 °C, representing a PCM content of 82 wt. %. On the other hand, microcapsules synthesized at 55 °C and 75 °C showed latent heats of 96.02 J/g and 95.66 J/g, respectively. The degree of supercooling for PCM microcapsules was reduced by decreasing the polymerization temperature, with the lowest supercooling observed for microcapsules synthesized at 45 °C. All microcapsules exhibited a monodisperse and narrow PSD of ~10 µm, indicating uniformity in microcapsule size and demonstrating that temperature variations had no significant impact on the particle size distribution. Future research should focus on low-temperature polymerization with extended polymerization times. Full article

Sputtering onto liquids is rapidly gaining attention for the green and controlled dry synthesis of ultrapure catalysts nanomaterials. In this study, we present a clean and single-step method for the synthesis of gold nanoparticles directly in polyethylene glycol (PEG) liquid using radio frequency (RF) magnetron sputtering and by subsequently transferring them to Nafion ionomer, fabricating a catalyst-coated membrane (CCM), an essential component of the proton exchange membrane water electrolyzer (PEMWE). The samples were systematically characterized at different stages of process development. The innovative transfer process resulted in a monodispersed homogeneous distribution of catalyst particles inside CCM while retaining their nascent nanoscale topography. The chemical analysis confirmed the complete removal of the trapped PEG through the process optimization. The electrochemical catalytic activity of the optimized CCM was verified, and the hydrogen evolution reaction (HER) in acidic media appeared outstanding, a vital step in water electrolysis toward H₂ production. Therefore, this first study highlights the advantages of RF sputtering in liquid for nanoparticle synthesis and its direct application in preparing CCM, paving the way for the development of innovative membrane preparation techniques for water electrolysis. Full article

The precise preparation and application of nanomicrospheres is currently an emerging research hotspot in the cutting-edge cross-disciplines. As an important functional material, nanosized microspheres show a broad application prospect in biomedicine, chemical engineering, materials science, and other fields. However, microspheres with good monodispersity are still facing technical bottlenecks, such as complicated preparation process and high cost. In this study, a multistage cyclic dielectrophoresis (MC-DEP) technique is innovatively proposed to successfully realize the high-resolution sorting of submicron microspheres. A dielectrophoresis chip adopts a unique electrode design, in which the electrodes are arranged at the top and bottom of the microchannel at the same time. This symmetric electrode structure effectively eliminates the difference in the distribution of dielectrophoretic force in the perpendicular direction and ensures the homogeneity of the initial state of particle sorting. Three pairs of focusing electrodes are in the front section of the microchannel for preaggregation of the microspheres, and the deflection electrodes in the back section are to realize particle size sorting. After this, the upper and lower limits of particle size are limited by multiple cycles of sorting. The multistage cyclic sorting increases the stability of particle deflection under dielectrophoretic forces and reduces the error perturbation caused by the fluid environment. The experimental results show that the multistage cycling sorting scheme significantly improves the monodispersity of the microspheres, and the coefficient of variation of the particle size is significantly reduced from the initial 12.3% to 5.4% after three cycles of sorting, which fully verifies the superior performance of this technology. Full article

The aim of this study was to prepare nanogels based on gelatin and xanthan-aldehyde for the enhancement of ibuprofen transdermal delivery. Firstly, the process of formulating nanogels using the reaction of Schiff’s base was optimized using experimental designs. Secondly, the structural characterization of nanogels was performed using laser particle size, zetometry, FTIR (Fourier Transform Infrared Spectroscopy), XRD (X-Ray Diffraction), SEM (scanning electron microscopy), and thermogravimetric analysis. Finally, the evaluation of pharmacological characteristics and formulation therapeutic efficacy were achieved using in vitro dissolution kinetics, ex vivo transdermal diffusion studies, and an evaluation of in vivo anti-inflammatory activity. The results of the experimental plan show that the formulations containing a ratio of 15:10 ibuprofen/polymer and a ratio of 1:2 gelatin/xanthan-aldehyde with a gelling time of 2 h exhibited the best results; the formulations showed a mean diameter of 179.9 ± 6.2 nm, a polydispersity index of 0.193, which confirms monodispersed particles, a zeta potential of 24.7 mV, denoting a high degree of particle stability, and an encapsulation rate of 93.78%. The FTIR spectroscopy analysis showed the formation of imine function in the nanogel, and scanning electron microscopy showed the globular and porous form of the formulation. The incorporation of ibuprofen into nanogels improved their in vitro dissolution kinetics and ex vivo transdermal diffusion. The incorporation of nanogels into a patch system for its in vivo anti-inflammatory activity has shown excellent efficiency with a percentage of edema inhibition at a dose of 25 mg and 50 mg of 38.77 ± 1.6% and 82.03 ± 9.03%, respectively, while the commercial reference gel presented inhibition values at a dose of 25 mg and 50 mg of 10.61 ± 1.71% and 37.03 ± 11.43%, respectively. Thus, the innovative pharmaceutical form of ibuprofen offers a promising model for enhancing drug bioavailability and therapeutic effects while reducing adverse effects. Full article

K–Se batteries offer high energy density and cost-effectiveness, making them promising candidates for energy storage systems. However, their practical applications are hindered by Se aggregation, sluggish ion diffusion, and significant volumetric expansion. To address these challenges, monodisperse hierarchical N-doped carbon microspheres (NCHS) with uniformly sized pores were synthesized as cathode hosts. The flower-like microstructure, formed by the assembly of two-dimensional building blocks, mitigated Se aggregation and facilitated uniform distribution within the pores, enhancing Se utilization. Nitrogen doping, introduced during synthesis, strengthened chemical bonding between selenium and the carbon host, suppressed side reactions, and accelerated reaction kinetics. These synergistic effects enabled efficient ion transport, improved electrolyte accessibility, and enhanced redox reactions. Additionally, the uniform particle and pore sizes of NCHS effectively mitigated volumetric expansion and surface accumulation, ensuring long-term cycling stability and superior electrochemical performance. Se-loaded NCHS (Se@NCHS) exhibited a high discharge capacity of 199.4 mA h g⁻¹ at 0.5 C after 500 cycles with 70.4% capacity retention and achieved 188 mA h g⁻¹ at 3.0 C, outperforming conventional carbon hosts such as Super P. This study highlights the significance of structural and chemical modifications in optimizing cathode materials and offers valuable insights for developing high-performance energy storage systems. Full article

The application of metal–organic frameworks (MOFs) has attracted increasing attention in organic synthesis. The modification of MOFs can efficiently tailor the structure and improve the property for meeting ongoing demand in various applications, such as the alteration of gas adsorption and separation, catalytic activity, stability, and sustainability or reusability. In this study, carboxyethylsilanetriol (CEST) disodium salt was used as a dual-functional ligand for modified Al-MIL-53 to fabricate CEST-functionalized Al-MIL-53 samples through a hydrothermal reaction of aluminum nitrate, terephthalic acid, and CEST disodium salt by varying the molar ratio of CEST to terephthalic acid and keeping a constant molar ratio of Al³⁺/-COOH of 1:1. The structure, composition, morphology, pore feature, and stability were characterized by XRD, different spectroscopies, electron microscopy, N₂ physisorption, and thermogravimetric analysis. With increasing CEST content, CEST-Al-MIL-53 still preserves an Al-MIL-53-like structure, but the microstructure changed compared with pure Al-MIL-53 due to the integration of CEST. Such a CEST-Al-MIL-53 was used as the support to load Pd particles and afford a catalyst Pd/CEST-Al-MIL-53 for Suzuki–Miyaura C-C cross-coupling reaction of aryl halides and phenylboronic acid under basic conditions. The resulting Pd/CEST-Al-MIL-53 showed a high catalytic activity compared with Pd/Al-MIL-53, due to the nanofibrous structure of silicon species-integrated CEST-Al-MIL-53. The nanofiber microstructure undergoes a remarkable transformation into intricate 3D cross-networks during catalytic reaction, which enables the leachable Pd particles to orientally redeposit and inlay into these networks as the monodisperse spheres and thereby effectively preventing Pd particles from aggregation and leaching, therefore demonstrating a high catalytic performance, long-term stability, and enhanced reusability. Obviously, the integration of CEST into MOFs can effectively prevent the leaching of active Pd species and ensure the re-deposition during catalysis. Moreover, catalytic performance strongly depended on catalyst dosage, temperature, time, solvent, and the type of the substituted group on benzene ring. This work further extends the catalytic application of hybrid metal–organic frameworks. Full article