Search Results (17)

Natural rutile is a widely available titanium mineral which shows great potential as a photocatalyst for environmental remediation when processed correctly. Industries invest large sums in the transformation of the rutile mineral into pure, synthetic nano titania. Still, the present study proves that bare natural rutile with trace element content can also be applied as a photocatalyst, without harsh chemical interventions, simply by processing via nano grinding. Samples with different mean primary particle size values were obtained by wet stirred media milling, their compositional and structural properties were investigated, and their photocatalytic properties were evaluated under both visible- and UV-light illumination for the degradation of phenol and ibuprofen. By changing the grain size and the particle size distribution, and due to the doping effect of impurities present in the mineral, the band gap values of the samples and their photocatalytic activities changed as well. The nano milled rutile exhibited visible light photocatalytic activity, with a 33% degradation efficiency in the case of both phenol and ibuprofen, after 22 h of irradiation. The present study not only highlights the photocatalytic degradation of a pharmaceutical by natural rutile mineral, but its findings also suggest that ground nano rutile can function as an environmentally friendly photocatalyst, as it not only avoids the use of harmful chemicals typically employed in TiO₂ synthesis but also offers a simpler, more cost-effective alternative for producing photocatalytic materials. Full article

The extensive use of pharmaceuticals in human and veterinary medicine has led to their persistent environmental release, posing ecological and public health risks. Major sources include manufacturing effluents, excretion, aquaculture, and improper disposal, contributing to bioaccumulation and ecotoxicity. Mycoremediation is the fungal-mediated biodegradation of pharmaceuticals, offers a promising and sustainable approach to mitigate pharmaceutical pollution. Studies have reported that certain fungal species, including Trametes versicolor and Pleurotus ostreatus, can degrade up to 90% of pharmaceutical contaminants, such as diclofenac, carbamazepine, and ibuprofen, within days to weeks, depending on environmental conditions. Fungi produce a range of extracellular enzymes, such as laccases and peroxidases, alongside intracellular enzymes like cytochrome P450 monooxygenases, which catalyze the transformation of complex pharmaceutical compounds. These enzymes play an essential role in modifying, detoxifying, and mineralizing xenobiotics, thereby reducing their environmental persistence and toxicity. The effectiveness of fungal biotransformation is influenced by factors such as substrate specificity, enzyme stability, and environmental conditions. Optimal degradation typically occurs at pH 4.5–6.0 and temperatures of 20–30 °C. Recent advancements in enzyme engineering, immobilization techniques, and bioreactor design have improved catalytic efficiency and process feasibility. However, scaling up fungal-based remediation systems for large-scale applications remains a challenge. Addressing these limitations with synthetic biology, metabolic engineering, and other biotechnological innovations could further enhance the enzymatic degradation of pharmaceuticals. This review highlights the enzymatic innovations, applications, and challenges of pharmaceutical mycoremediation, emphasizing the potential of fungi as a transformative solution for sustainable pharmaceutical waste management. Full article

The presented study investigated the possibility of using the Acinetobacter johnsonii MC5 strain, isolated from raw sewage by the enrichment culture method, in the bioremediation of soil contaminated with selected NSAIDs, i.e., ibuprofen (IBF), diclofenac (DCF), and naproxen (NPX), using the bioaugmentation technique. The degradation potential of A. johnsonii MC5 was first evaluated using a mineral salt medium containing drugs as the only sources of carbon and energy. The results show that the strain MC5 was capable of utilizing the tested compounds in medium, indicating that the drugs might be metabolically degraded. IBF and NPX were degraded with a similar rate and DT50 values were determined to be approximately 5 days, while the degradation process for DCF was slower, and the DT50 value was about 5 times higher (22.7 days) compared to those calculated for IBF and NPX. Bioaugmentation of non-sterile soil with A. johnsonii MC5 increased the rate of disappearance of the tested drugs, and DT50 values decreased 5.4-, 3.6-, or 6.5-fold for IBF, DCF, or NPX, respectively, in comparison with the values obtained for the soil with indigenous microorganisms only. The obtained results suggest that A. johnsonii MC5 may have potential for use in bioremediation of NSAID-contaminated soils; however, detailed studies are needed before using this strain in such process on a larger scale. Full article

Osteoarthritis is a chronic inflammatory condition characterized by the degeneration of joint cartilage and underlying bone, resulting in pain, swelling, and reduced mobility. This study evaluates the efficacy of salmon nasal cartilage-derived proteoglycans in mitigating osteoarthritis symptoms and investigates the underlying molecular mechanisms. This study employed a rat model of osteoarthritis induced by monosodium iodoacetate (MIA) injection. The rats were orally administered salmon nasal cartilage-derived proteoglycans or ibuprofen. Key aspects of osteoarthritis pathology, including impaired exercise ability, inflammation, extracellular matrix degradation, and chondrocyte apoptosis, were assessed using histological analysis, micro-CT, treadmill testing, serum assays, and mRNA/protein expression studies. The MIA injection caused significant cartilage damage, reduced bone mineral density, and impaired exercise ability. Additionally, it elevated serum levels of prostaglandin E2 and nitric oxide, increased the mRNA and protein levels of inflammation-related factors, and activated apoptosis signaling pathways in cartilage. Treatment with salmon nasal cartilage-derived proteoglycans significantly improved cartilage morphology and mineralization, reduced inflammation, and inhibited apoptosis signaling pathways, with effects comparable to those observed with ibuprofen treatment. These findings highlight the potential of salmon nasal cartilage-derived proteoglycans as a therapeutic agent for managing osteoarthritis by effectively reducing inflammation, preventing cartilage degradation, and inhibiting chondrocyte apoptosis. Full article

Environmental organo bentonite synthesis using curcumin-derived chemicals is used as catalyst support for zinc with a Zn-pillaring structure (Zn@CU/BEN). The obtained composite was assessed as an affordable, highly effective, and multifunctional photocatalyst for enhanced oxidation of ibuprofen (IBU) residuals in water supplies. The Zn@CU/BEN composite (0.4 g/L) displayed significant catalytic activities, resulting in the complete oxidation of IBU (25 mg/L) after 80 min. Then, the complete mineralization based on the full elimination of TOC content was recognized after 160 min, with significant indications about the formed intermediates. The identified intermediates, together with the identification of hydroxyl radicals as the essential oxidizing agent, declared an oxidation pathway of IBU over Zn@CU/BEN that involved three steps: hydroxylation, decarboxylation/demethylation, and ring-opening processes. The toxic properties of raw pollutants as well as the oxidizing product at different durations were assessed based on the cell viability results of kidney (HEK293T) and liver (HepG2) cell lines. The partially oxidized sample in the initial duration displayed a higher toxicity impact than the raw IBU. However, the treated sample after 160 min reflected high biosafety and non-toxic properties (cell viability > 97%). The synergetic impact of bentonite and bentonite organo-modified by curcumin extract reflects enhancements in the adsorption as well as the oxidation performance of pillared zinc as a catalyst. Full article

In this study, we examined the sorption of selected “chemicals of emerging concern” (CEC) on humic substances commonly found in water and municipal wastewater. These were ibuprofen, diclofenac, caffeine, carbamazepine, estrone, triclosan, bisphenol A, and isoproturon. The humic substances (HSs) were synthetic and not contaminated by the tested organic substances. The elemental composition and content of mineral micropollutants, gravimetric curves, and the IR spectrum of HSs were determined. We determined a relationship between the process efficiency and the characteristics of a sorbent and sorbate using the properties of organic substances sorbed on HSs. This relationship was confirmed by sorption tests on the HS complex, i.e., the HS-organic micropollutant. It has been shown that the given complexes have a greater affinity for hydrophobic surfaces than hydrophilic surfaces. To confirm the nature of the sorbent surfaces, we determined their zeta potential dependence on the pH of the solution. Studies have shown that HSs are carriers of both mineral substances and CEC in water and sewage environments. Full article

The NSAID ibuprofen (2-(4-isobutylphenyl)propanoic acid) and the structurally related 3-phenylpropanoic acid (3PPA), are widely used pharmaceutical and personal care products (PPCPs) which enter municipal waste streams but whose relatively low rates of elimination by wastewater treatment plants (WWTPs) are leading to the contamination of aquatic resources. Here, we report the isolation of three bacterial strains from a municipal WWTP, which as a consortium are capable of mineralizing ibuprofen. These were identified as the Pseudomonas citronellolis species, termed RW422, RW423 and RW424, in which the first two of these isolates were shown to contain the catabolic ipf operon responsible for the first steps of ibuprofen mineralization. These ipf genes which are associated with plasmids could, experimentally, only be transferred between other Sphingomonadaceae species, such as from the ibuprofen degrading Sphingopyxis granuli RW412 to the dioxins degrading Rhizorhabdus wittichii RW1, generating RW421, whilst a transfer from the P. citronellolis isolates to R. wittichii RW1 was not observed. RW412 and its derivative, RW421, as well as the two-species consortium RW422/RW424, can also mineralize 3PPA. We show that IpfF can convert 3PPA to 3PPA-CoA; however, the growth of RW412 with 3PPA produces a major intermediate that was identified by NMR to be cinnamic acid. This and the identification of other minor products from 3PPA allows us to propose the major pathway used by RW412 to mineralize 3PPA. Altogether, the findings in this study highlight the importance of ipf genes, horizontal gene transfer, and alternative catabolic pathways in the bacterial populations of WWTPs to eliminate ibuprofen and 3PPA. Full article

Pharmaceutically active compounds (PhACs) are continuously introduced into the environment by human and livestock excretion, hospital sewage and pharmaceutical effluents. While the performance of UV photolysis regarding PhACs degradation may be limited by low quantum yields, it may be efficient when the contaminants significantly absorb UV radiation. In this work, the direct photolysis under 254 nm UVC radiation of acetaminophen (ACT), atenolol (ATL), bezafibrate (BZF), diclofenac (DIC) and ibuprofen (IBU), isolated and in mixture, was investigated. The results showed that PhAC photolysis followed apparent first-order kinetics, with removals ranging from 32% to 99% after 60 min, while all the compounds exhibited lower photolysis rates when mixed in solution. Less than 13% mineralization was achieved. The toxicity of irradiated solutions of Vibrio fischeri remained the same or slightly decreased for ATL, BZF and IBU, increased for ACT, and notably decreased for DIC; nevertheless, the solution of mixed PhACs became very toxic following irradiation, showing the need for oxidant addition for removing residual toxicity. Full article

Catalytic ozonation is an important water treatment method among advanced oxidation processes (AOPs). Since the first development, catalytic ozonation has been consistently improved in terms of catalysts used and the optimization of operational parameters. The aim of this work is to compare the catalytic activity of polyaniline (PANI) and thermally treated polyaniline (PANI 900) in the catalytic ozonation of ibuprofen solutions at different pH values (4, 7, and 10). Catalysts were thoroughly characterized through multiple techniques (SEM, Raman spectroscopy, XPS, pHPZC, and so on), while the oxidation process of ibuprofen solutions (100 mgL⁻¹) was assessed by several analytical methods (HPLC, UV254, TOC, COD, and BOD5). The experimental data demonstrate a significant improvement in ibuprofen removal in the presence of prepared solids (20 min for PANI 900 at pH10) compared with non-catalytic processes (56 min at pH 10). Moreover, the influence of solution pH was emphasized, showing that, in the basic region, the removal rate of organic substrate is higher than in acidic or neutral range. Ozone consumption mgO₃/mg ibuprofen was considerably reduced for catalytic processes (17.55—PANI, 11.18—PANI 900) compared with the absence of catalysts (29.64). Hence, beside the ibuprofen degradation, the catalysts used are very active in the mineralization of organic substrate and/or formation of biodegradable compounds. The best removal rate of target pollutants and oxidation by-products was achieved by PANI 900, although raw polyaniline also presents important activity in the oxidation process. Therefore, it can be stated that polyaniline-based catalysts are effective in the oxidation processes. Full article

The present study investigates the potential of waste tires to produce a valuable adsorbent material for application in wastewater treatment. In the first stage, the pyrolysis of ground rubber tire was explored using non-isothermal and isothermal thermogravimetric analysis experiments. The effect of operating parameters, such as heating rate and pyrolysis temperature, on the pyrolysis product yields was considered. The slow pyrolysis of ground rubber tire was taken up in a large-scale fixed-bed reactor for enhanced char recovery. Four pyrolysis temperatures were selected by thermogravimetric data. The product yields were strongly influenced by the pyrolysis temperature; at higher temperatures, the formation of more gases and liquid was favored, while at lower pyrolysis temperatures, more char (solid fraction) was formed. The produced chars were characterized in terms of mineral composition, textural properties, proximate analysis, and structural properties to identify the relationships between the pyrolysis temperature and the char properties. In a second step, a series of activated chars were prepared, starting from the pyrolytic chars via chemical and/or physical activation methods. Then, the activated chars were characterized and tested as adsorbents for atrazine and ibuprofen. Adsorption experiments in aqueous media were carried out in a small-scale batch reactor system. Chemical activation seems appropriate to significantly reduce the inorganic compounds initially present in ground rubber tire and contribute to an important increase in the surface area and porosity of the chars. Adsorption experiments indicated that chemically activated chars exhibit high aqueous adsorption capacity for atrazine. Full article

The technological performance of a chabazite-rich rock belonging to the Campanian Ignimbrite formation, outcropping in the nearby of San Mango sul Calore (southern Italy), has been evaluated for the sorption and release of ibuprofen sodium salt after a surface modification of the starting geomaterial using two different chlorinated surfactants. Equilibrium sorption isotherms and in vitro loading tests demonstrated that the maximum sorption capacities of this geomaterial reach up to 24.5 and 13.5 mg/g, respectively, for zeolite modified with cetylpyridinium and benzalkonium. These results, obtained by non-linear mathematical modeling of the experimental curves, are definitely compatible with the concentrations of the most common non-steroidal anti-inflammatory drugs (such as ibuprofen) in wastewaters, which have been recently considered as contaminants of emerging concern. This investigation also encourages a new possible sustainable exploitation of the lithified yellow facies of Campanian Ignimbrite, although future developments will be focused on using more stable and eco-friendlier two-tailed surfactants. Full article

This article covers the design and evaluation of a novel drug vehicle: a thermosensitive, injectable, high-oil-content (50% w/w) emulgel providing a controlled release of lipophilic pharmaceuticals. Different vegetable (castor, canola, olive, peanut, grapeseed, linseed), mineral (paraffin) and semisynthetic (isopropyl myristate, oleic acid) oils were screened for ibuprofen (IBU) solubility and for their capacity for high-shear emulsification in a 17% (w/w) aqueous solution of poloxamer 407. Chosen emulgels were subject to a rheological evaluation, a syringeability test (TA.XT texture analyser; 2 mL syringe; 18 G, 20 G and 22 G needles) and a drug release study (48 h; cellulose membrane; 0.05 mol/L phosphate buffer at pH 7.4). Castor oil turned out to be an optimal component for IBU incorporation. Blank and drug-loaded castor oil emulgels were susceptible to administration via a syringe and needle, with the absolute injection force not exceeding 3 kg (29.4 N). The drug release test revealed dose-dependent, quasi-linear kinetics, with up to 44 h of controlled, steady, linear release. The results indicate the significant potential of high-oil-content, oil-in-water thermosensitive emulgel formulations as vehicles for the controlled release of lipophilic APIs. Full article

At present, the use of conventional wastewater processes is becoming increasingly challenging, mainly due to the presence of biorecalcitrant organic matter. Advanced oxidation processes such as Fenton, Fenton-like and hybrid processes have been successfully employed for the treatment of highly concentrated and toxic non-biodegradable pollutants. Here, a series of bimetallic catalysts, based on Cu/Fe supported over ZrO_2, were investigated for the mineralization of ibuprofen with a heterogeneous Fenton-like reaction. The materials were prepared by incipient wetness impregnation and characterized by standard techniques. Temperature-programmed experiments highlighted the promotion of the reduction in CuO due to the synergistic effects of the coupled redox cycles of copper (Cu²⁺/Cu⁺) and iron (Fe⁺³/Fe⁺²). 5%Cu-5%Fe/ZrO₂ not only displays the highest ibuprofen mineralization (83%) under optimum conditions but also exploits its activity in a wider range of pH (3–5) with extremely low metal leaching. The recycling of bimetallic catalysts reveals that only the 5%Cu-5%Fe/ZrO₂ system is able to provide sustainable activity in heterogeneous Fenton process. Full article

First-line analgetic medication used in the field of musculoskeletal degenerative diseases, like Nonsteroidal anti-inflammatory drugs (NSAIDs), reduces pain and prostaglandin synthesis, whereby peptic ulcers are a severe adverse effect. Therefore, proton pump inhibitors (PPI) are frequently used as a concomitant medication to reduce this risk. However, the impact of NSAIDs or metamizole, in combination with PPIs, on bone metabolism is still unclear. Therefore, human mesenchymal stem cells (hMSCs) were cultured in monolayer cultures in 10 different groups for 21 days. New bone formation was induced as follows: Group 1 negative control group, group 2 osteogenic differentiation media (OSM), group 3 OSM with pantoprazole (PAN), group 4 OSM with ibuprofen (IBU), group 5 OSM with diclofenac (DIC), group 6 OSM with metamizole (MET), group 7 OSM with ibuprofen and pantoprazole (IBU + PAN), group 8 OSM with diclofenac and pantoprazole (DIC + PAN), group 9 OSM with metamizole and pantoprazole (MET + PAN) and group 10 OSM with diclofenac, metamizole and pantoprazole (DIC + MET + PAN). Hydroxyapatite content was evaluated using high-sensitive radioactive ^99mTc-HDP labeling. Within this study, no evidence was found that the common analgetic medication, using NSAIDs alone or in combination with pantoprazole and/or metamizole, has any negative impact on the osteogenic differentiation of mesenchymal stem cells in vitro. To the contrary, the statistical results indicate that pantoprazole alone (group 3 (PAN) (p = 0.016)) or diclofenac alone (group 5 (DIC) (p = 0.008)) enhances the deposition of minerals by hMSCS in vitro. There is an ongoing discussion between clinicians in the field of orthopaedics and traumatology as to whether post-surgical (pain) medication has a negative impact on bone healing. This is the first hMSC in vitro study that investigates the effects of pain medication in combination with PPIs on bone metabolism. Our in vitro data indicates that the assumed negative impact on bone metabolism is subsidiary. These findings substantiate the thesis that, in clinical medicine, the patient can receive every pain medication needed, whether or not in combination with PPIs, without any negative effects for the osteo-regenerative potential. Full article

Statistical analysis was applied to optimize the electrochemical mineralization of ibuprofen with two boron-doped diamond (BDD) electrodes in a continuous electrochemical flow reactor under recirculation batch mode. A central composite rotatable (CCR) experimental design was used to analyze the effect of initial pH (2.95–13.04), current intensity (2.66–4.34 A), and volumetric flow rate (0.16–1.84 L/min) and further optimized by response surface methodology (RSM) to obtain the maximum mineralization efficiency and the minimum specific energy consumption. A 91.6% mineralization efficiency (E_M) of ibuprofen with a specific energy consumption (E_C) of 4.36 KW h/g TOC within 7 h of treatment was achieved using the optimized operating parameters (pH₀ = 12.29, I = 3.26 A, and Q of 1 L/min). Experimental results of RSM were fitted via a third-degree polynomial regression equation having the performance index determination coefficients (R²) of 0.8658 and 0.8468 for the E_M and E_C, respectively. The reduced root-mean-square error (RMSE) was 0.1038 and 0.1918 for E_M and E_C, respectively. This indicates an efficient predictive performance to optimize the operating parameters of the electrochemical flow reactor with desirability of 0.9999993. Besides, it was concluded that the optimized conditions allow to achieve a high percentage of ibuprofen mineralization (91.6%) and a cost of 0.002 USD $/L. Therefore, the assessed process is efficient for wastewater remediation.” Full article