Search Results (41)

This study focuses on porous polyimide (PPI) lubricating materials for high-speed aerospace bearings. Based on their real microstructure, three-dimensional digital model reconstruction and mesoscale seepage characteristics were investigated. First, a sequence of two-dimensional slice images of PPI was obtained using micro-focus X-ray computed tomography (CT). Through image filtering, threshold segmentation, and three-dimensional reconstruction, a highly faithful digital model of the pore structure was constructed, and a quantified pore-network model was further extracted. Second, a multiple-relaxation-time lattice Boltzmann model based on the D3Q27 discrete scheme was established, and its accuracy and stability in complex boundaries and pressure-driven flows were verified using classic benchmark cases. Subsequently, the validated numerical model was applied to the reconstructed PPI pore structure to simulate and systematically analyze the single-phase seepage behavior of lubricating oil. The results show that the lubricant seepage exhibits a strong “preferential flow path” effect, with most of the flow transported through a small number of large-size throats. A clear quantitative relationship exists between the microscopic flow field structure—including velocity distribution, flow paths, and pressure gradient—and the pore-topology features, such as throat-size distribution, connectivity, and tortuosity. This verifies the mesoscale mechanism that “structure governs flow.” The complete technical chain established in this work—“real-structure reconstruction–numerical model validation–seepage mechanism analysis”—provides a reliable theoretical and numerical tool for gaining deeper insight into the lubricant transport behavior in porous polyimide and offers guidance for the microstructural design and optimization of this material. Full article

Each year, around 23 million miscarriages occur worldwide, which have a substantial emotional impact on parents, and impose significant societal costs. While medical care accounts for most expenses, work productivity loss contributes significantly. Addressing underlying causes of miscarriage could improve parents’ mental health and potentially their economic impact. In most countries, investigations into miscarriage causes are only recommended after recurrent cases, focusing mainly on maternal factors. Fetal and placental tissue are rarely examined, as current guidelines do not advise routine genetic analyses of pregnancy tissue, because the impact of further clinical decision making and individual prognosis is unclear. However, this leaves over 90% of all miscarriage cases unexplained and highlights the need for alternative methods. We therefore conducted a narrative review on genetic analysis, autopsy, and imaging of products of conception (POC). Karyotyping, QF-PCR, SNP array, and aCGH were reviewed in different research settings, with QF-PCR being the most cost-effective, while obtaining the highest technical success rate. Karyotyping, historically being considered the gold standard for POC examination, was the least promising. Post-mortem imaging techniques including post-mortem ultrasound (PMUS), ultra-high-field magnetic resonance imaging (UHF-MRI), and microfocus computed tomography (micro-CT) show promising diagnostic capabilities in miscarriages, with micro-CT achieving the highest cost-effective performance. In conclusion, current guidelines do not recommend diagnostic testing for most cases, leaving the majority unexplained. Although genetic and imaging techniques show promising diagnostic potential, they should not yet be implemented in routine clinical care and require thorough evaluation within research settings—assessing not only diagnostic and psychosocial outcomes but also economic implications. Full article

High-energy microfocus X-ray sources are increasingly applied in non-destructive testing, high-resolution imaging, and additive manufacturing. The design and optimization of the anode target critically determine source efficiency, spectral characteristics, and imaging performance. In this study, Monte Carlo simulations using the Geant4 toolkit were conducted to systematically evaluate transmission and reflection tungsten targets with varied thicknesses and incidence angles under electron beam energies ranging from 100 to 300 keV. The results reveal that, for a microfocus X-ray source operating at a maximum tube voltage of 225 kV, the optimal transmission tungsten target exhibits a thickness of 18 μm, whereas the optimal reflection tungsten target achieves maximum efficiency at a 30 μm thickness with a 25° incidence angle. A nearly linear relationship between electron energy and optimal transmission target thickness is established within the 100–300 keV range. Additionally, the influence of beryllium window thickness and filter materials on the emergent X-ray spectrum is analyzed, demonstrating pathways for spectral hardening and transmission optimization. This study further elucidates the angular–intensity distribution of emitted X-rays, providing critical insights into beam spatial characteristics. Collectively, these findings establish a theoretical foundation for target optimization, enabling enhanced X-ray source performance in high-resolution imaging and supporting applications in detector calibration, flatness correction, beam hardening correction, and radiation shielding design. Full article

Osteosarcoma is medically defined as a bone-forming tumor with associated bone-degrading activity. There is a lack of knowledge about the network that generates the overproduction of bone. We studied the early stage of osteosarcoma development with mice enduring a periosteum injection of osteosarcoma cells at the proximal third of the tibia. On day 7 (D7), tumor cells activate the over-synthesis of bone-like material inside the medulla. This overproduction of bone is quickly (D13) followed by degradation. Samples were characterized by microfocus small-angle X-ray scattering (SAXS), wide-angle X-ray scattering (WAXS), optical and electron microscopies, and micro-indentation. This intramedullary apatite–collagen composite synthesis highlights an unknown network of bone synthesis stimulation by extramedullary osteosarcoma cells. This synthesis activation mechanism, coupled with the well-known bone induced osteosarcoma growth activation, produces a rare synergy that may enlighten the final osteosarcoma morphology. With this aim, a 3D cellular automaton was developed that only included two rules. Simulations can accurately reproduce the bi-continuous sponge macroscopic structure that was analyzed from mice tumor micro-tomography. This unknown tumor activation pathway of bone synthesis, combined with the known bone activation of tumor growth, generates a positive feedback synergy explaining the unusual sponge-like morphology of this bone cancer. From a biomaterials point of view, how nature controls self-assembly processes remains an open question. Here, we show how the synergy between two biological growth processes is responsible for the complex morphology of a bone tumor. This highlights how hierarchical morphologies, accurately defined from the nanometer to the centimeter scale, can be controlled by positive feedback between the self-assembly of a scaffold and the deposition of solid material. Full article

Synchrotron microbeam X-ray diffraction was employed to investigate the local-scale structure and solid-state phase transformation within individual spherulites of poly(vinylidene fluoride) (PVDF). In thin, non-oriented films, PVDF crystallizes into α and γ-phases, forming distinct spherulitic morphologies: large, banded α-spherulites and smaller, irregular “mixed” spherulites dominated by the γ-phase. For samples crystallized at high undercooling (160 °C), the mixed spherulites primarily consisted of the γ-phase, with only a minor fraction of α-lamellae localized at the spherulite boundaries. At higher crystallization temperatures (165 °C), the α-phase was entirely absent from the mixed spherulites. High-temperature annealing induced a phase transformation from the α-phase to the γ-phase, initiating at the interface between α- and γ-spherulites. The transformation propagated radially along the b-axis of the α-spherulite, while its characteristic banded morphology remained intact. Radial scanning with an X-ray microbeam provided spatially resolved mapping of the structural transition within the α-spherulite at the micrometer scale, offering detailed insights into the transformation mechanism and its impact on the spherulitic structure. The fast crystal growth direction remained unaltered during the transition, suggesting minimal material transport and maintaining structural coherence. Full article

The present study focuses on advancing one of the most popular AM techniques, namely, laser powder bed fusion (LPBF) technology, which has the ability to produce complex geometry parts with minimum material waste but continues to face challenges in minimizing the surface roughness. For this purpose, a novel hybrid manufacturing technology, which applies in a single setup (in-envelope) both LPBF technology and high-speed machining, was examined in this research for the fabrication of tensile specimens with three different surface finish conditions: as-built, hybrid (in-envelope machining) and post-machining (out-of-envelope) on Inconel^® alloy 718, hereafter referred to as IN718. As the application of the IN718 alloy in service is typically specified in the precipitation-hardened condition, three different heat treatments were applied to the tensile specimens based on the most promising thermal cycles identified previously for room-temperature tensile properties by the authors. The as-built (AB) specimens had the highest average surface roughness (R_a) of 5.1 μm ± 1.6 μm, which was a significant improvement (five-fold) on the hybrid (1.0 μm ± 0.2 μm) and post-machined (0.8 μm ± 0.5 μm) surfaces. The influence of this surface roughness on the mechanical properties was studied both at ambient temperature and at 650 °C, which is close to the maximum service temperature of this alloy. Regardless of the surface conditions, the room-temperature mechanical properties of the as-fabricated IN718 specimens were within the range of properties reported for standard wrought IN718 in the annealed condition. Nonetheless, detailed examination of the strain localization behavior during tensile testing using digital image correlation showed that the IN718 specimens with AB surfaces exhibited lower ductility (global and local) relative to the hybrid and post-machined ones, most likely due to the higher surface roughness and near-surface porosity in the former. At 650 °C, even though the mechanical properties of all the heat-treated IN718 specimens surpassed the minimum specifications for the wrought precipitation-hardened IN718, the AB surface condition showed up to 4% lower strength and 33–50% lower ductility compared with the hybrid and PM surface conditions. Microfocus X-ray computed tomography (µXCT) of the fractured specimens revealed the presence of numerous open cracks on the AB surface and a predisposition for the near-surface pores to accelerate rupture, leading to premature failure at lower strains. Full article

This manuscript presents the results from the synthesis and characterization of a slag analogue with a nominal composition of 17 wt% LiMnO₂ and 83 wt% Ca₂SiO₄ encountering fairly high cooling rates in order to study the evolution of Mn-species. The Mn species was also simulated from 1223 K to 1773 K using a thermodynamic model, assuming a homogeneous melt. The micro-composition including the Mn species of the solidified slag was determined experimentally, and was used as basis for molecular dynamics (MD) simulation. The MD simulation provides information on structure and viscosity at high temperatures, which are otherwise difficult to access. These parameters significantly influence oxidation state of redox-active elements and the solidified product. The micro-composition analyzed by electron probe micro analysis (EPMA) and synchrotron-based micro-X-ray fluorescence (micro-XRF) showed that Mn-rich and Ca-Si-rich phases are separated. While the Mn-O phases did not contain noticeable Ca, the Ca₂SiO₄ phase had incorporated 0.6 wt% of Mn. The slag solidified into round-shaped and droplet-shaped grains of a Li-Mn-oxide, some Mn₃O₄ and Ca₂SiO₄. The powder X-ray diffraction (PXRD) confirmed the formation of larnite; the identity of the Li-Mn-oxide, however, remained inconclusive. The Mn oxidation state (OS) was identified using synchrotron-based micro-X-ray absorption near edge spectroscopy (micro-XANES). The Mn-O grains matched well with Li-Mn-oxides and a Mn OS: +3, e.g., LiMn³⁺O₂. Small areas matching hausmannite (Mn²⁺Mn₂³⁺O₄) were also identified. The OS of Mn in the silicate phase could not be identified. For comparison, a slowly cooled slag analogue with similar composition, but higher Si content, was also subjected to micro-XANES. The slowly cooled slag formed long Mn-rich needles in a matrix of large calcium silicate crystals. The Mn-rich crystals matched well with the XANES spectrum of a Mn³⁺ Li-oxide like LiMn³⁺O₂. At the rim of the needles, the Mn-spectra matched well the hausmannite (Mn²⁺Mn₂³⁺O₄) reference. In the silicate phases, Mn had an OS: +2, unambiguously. The melt structure at different temperatures of two compositions, i.e., LiMn³⁺O₂ and Ca₂SiO₄, was simulated using molecular dynamics (MD). They serve as model compositions, assuming a heterogeneous melt. The results show significant different degrees of polymerization and viscosity. Information from MD simulations can support the identification of potentially different oxygen permeability and with that prediction of oxidation states. The bulk composition was identified by inductively coupled plasma optical emission spectrometry (ICP-OES), bulk structure by PXRD and bulk species by lab-XANES. The synchrotron micro analysis including micro-XRD were performed at the microfocus beamline I18 at the Diamond Light Source. Pure reference compounds were prepared and characterized with the same multi-modal approach. Full article

(1) Background: Tick-borne encephalitis (TBE) is the most important tick-borne viral disease in Eurasia, although effective vaccines are available. Caused by the tick-borne encephalitis virus (TBEV, syn. Orthoflavivirus encephalitidis), in Europe, it is transmitted by ticks like Ixodes ricinus and Dermacentor reticulatus. TBEV circulates in natural foci, making it endemic to specific regions, such as southern Germany and northeastern Poland. Our study aimed to identify new TBEV natural foci and genetically characterize strains in ticks in previously nonendemic areas in Eastern Germany and Western Poland. (2) Methods: Ticks were collected from vegetation in areas reported by TBE patients. After identification, ticks were tested for TBEV in pools of a maximum of 10 specimens using real-time RT-PCR. From the positive TBEV samples, E genes were sequenced. (3) Results: Among 8400 ticks from 19 sites, I. ricinus (n = 4784; 56.9%) was predominant, followed by D. reticulatus (n = 3506; 41.7%), Haemaphysalis concinna (n = 108; 1.3%), and I. frontalis (n = 2; <0.1%). TBEV was detected in 19 pools originating in six sites. The phylogenetic analyses revealed that TBEV strains from Germany and Poland clustered with other German strains, as well as those from Finland and Estonia. (4) Conclusions: Although there are still only a few cases are reported from these areas, people spending much time outdoors should consider TBE vaccination. Full article

Cardiovascular diseases are the most common cause of death worldwide, and they still have dramatic consequences on the patients’ lives. Murine models are often used to study the anatomical and microstructural changes caused by the diseases. Contrast-enhanced microfocus computed tomography (CECT) is a new imaging technique for 3D histology of biological tissues. In this study, we confirmed the nondestructiveness of Hf-WD 1:2 POM-based CECT and cryogenic CECT (cryo-CECT) to image the heart in 3D. The influence of the image quality (i.e., acquisition time and spatial resolution) was assessed for the characterization of the heart structural constituents: heart integrity, the coronary blood vessels and the heart valves. Coronary blood vessels were visualized and segmented in murine hearts, allowing us to distinguish veins from arteries and to visualize the 3D spatial distribution of the right coronary artery and the left main coronary artery. Finally, to demonstrate the added value of 3D imaging, the thickness distribution of the two leaflets in the mitral valve and three cusps in the aortic valve was computed in 3D. This study corroborates the added value of CECT and cryo-CECT compared to classical 2D histology to characterize ex vivo the structural properties of murine hearts and paves the way for the detailed 3D (micro)structural analyses of future cardiovascular disease models obtained in mice and rats. Full article

Background: The distinction between where the pulp chamber ends and the root canal system begins is poorly defined within the existing literature. Methods: This paper aimed to describe a range of accurate methods to define the transition from pulp chamber to root canal in different first molar root morphologies using micro-focus computed tomography (micro-CT). Methods: The sample consisted of 86 mandibular and 101 maxillary first molars from the skeletal collections housed in the Department of Anatomy and Histology of the Sefako Makgatho Health Sciences University and the Pretoria Bone Collection. A stepwise approach using the cemento–enamel junction (CEJ) and dedicated landmarks was followed to create an automated cross-sectional slice. Results: Transition from pulp chamber to root canal could be accurately determined on maxillary and mandibular teeth. The occurrence of two separate roots in mandibular molars was 97.7%, with the remaining 2.3% having an additional disto-lingual root, with no mandibular molars displaying fused roots. In the maxillary molars, 92.1% had three separate roots and 7.9% displayed root fusion. Within this group, one tooth displayed a C-shaped root canal configuration and one a mesotaurodont-type morphology. Conclusion: The suggested methodology to determine orifice location was found to be appropriate in all morphological types. Full article

Docosahexaenoic acid (DHA) is an omega-3 fatty acid that exerts physiological effects via G protein-coupled receptor 120 (GPR120). In our previous studies, we figured out the inhibitory effects of DHA on TNF-α (Tumor necrosis factor-α)-induced osteoclastogenesis via GPR120 in vivo. Moreover, DHA directly suppressed RANKL expression in osteoblasts via GPR120 in vitro. In this study, we generated bone marrow chimeric mice using GPR120 deficient mice (GPR120-KO) to study the inhibitory effects of DHA on bone resorption and osteoclast formation. Bone marrow cells of wild-type (WT) or GPR120-KO mice were transplanted into irradiated recipient mice, which were WT or GPR120 deficient mice. The resulting chimeric mice contained stromal cells from the recipient and bone marrow cells, including osteoclast precursors, from the donor. These chimeric mice were used to perform a series of histological and microfocus computed tomography (micro-CT) analyses after TNF-α injection for induction of osteoclast formation with or without DHA. Osteoclast number and bone resorption were found to be significantly increased in chimeric mice, which did not express GPR120 in stromal cells, compared to chimeric mice, which expressed GPR120 in stromal cells. DHA was also found to suppress specific signaling pathways. We summarized that DHA suppressed TNF-α-induced stromal-dependent osteoclast formation and bone resorption via GPR120. Full article

The interest in the development of dental enamel thickness measurement techniques is connected to the importance of metric data in taxonomic assessments and evolutionary research as well as in other directions of dental studies. At the same time, advances in non-destructive imaging techniques and the application of scanning methods, such as micro-focus-computed X-ray tomography, has enabled researchers to study the internal morpho-histological layers of teeth with a greater degree of accuracy and detail. These tendencies have contributed to changes in established views in different areas of dental research, ranging from the interpretation of morphology to metric assessments. In fact, a significant amount of data have been obtained using traditional metric techniques, which now should be critically reassessed using current technologies and methodologies. Hence, we propose new approaches for measuring dental enamel thickness using palaeontological material from the territories of northern Vietnam by means of automated and manually operated techniques. We also discuss method improvements, taking into account their relevance for dental morphology and occlusion. As we have shown, our approaches demonstrate the potential to form closer links between the metric data and dental morphology and provide the possibility for objective and replicable studies on dental enamel thickness through the application of automated techniques. These features are likely to be effective in more profound taxonomic research and for the development of metric and analytical systems. Our technique provides scope for its targeted application in clinical methods, which could help to reveal functional changes in the masticatory system. However, this will likely require improvements in clinically applicable imaging techniques. Full article

Foreign bodies are found in as many as 15% of traumatic wounds. Point of Care ultrasound (POCUS) is now considered reliable for detecting FBs in wounds. Unfortunately, up to 38% of these FBs are initially missed, resulting in infections, delayed wound healing, and loss of function. Microfocus X-ray imaging (MFXI) has a significantly higher resolution (up to 100×) than conventional X-ray imaging. Therefore, it can potentially be used for Point of Care diagnostics. Up to seven glass fragments smaller than 2.5 mm were embedded in each of the 58 chicken wings and thighs. Two control samples were prepared with no glass fragments. Five emergency medicine physicians with ultrasound training imaged the samples with a Butterfly iQ+ at 1 to 10 MHz center frequencies and counted the glass pieces. This device is an example of handheld PCUS equipment that is particularly valuable in resource-limited areas and austere settings where portability is a significant factor. The same five physicians counted the number of foreign bodies in each X-ray image. The physicians were not trained to read micro-focus X-ray images but had read standard X-rays regularly as part of their medical practice and had at least 3 years of hands-on clinical practice using POCUS. Across physicians and samples, raters correctly identified an average of 97.6% of FBs using MFXI (96.5% interrater reliability) and 62.3% of FBs using POCUS (70.8% interrater reliability). Full article

Ferromanganese nodule nuclei are considered crucial to the formation and distribution of nodules. However, because it is difficult and time-consuming to study ferromanganese nodule nuclei, few studies have been performed, despite the large number of samples. Here, we analyzed the nuclei of 934 ferromanganese nodules from the abyssal seafloor around Minamitorishima Island (western North Pacific Ocean) using X-ray computed tomography (CT). Based on the CT number distribution (describing X-ray absorption in Hounsfield units, HU), we classified the nuclei as Type I (>1800 HU) or Type II (<1800 HU). Additionally, some Type I nuclei had characteristic conical shapes (Type I-C) distinct from the shapes of other nuclei (Type I-O). Based on the chemical compositions determined by microfocus X-ray fluorescence analyses of selected samples, we identified Type I-C, I-O, and II nuclei as fish teeth, hard rocks (volcanic rock, ironstone, or phosphorite), and sediments, respectively. These nucleus types were observed in sufficient quantities at all dive sites that we conclude them to be typical of nodule nuclei in the study area. Fish-tooth nuclei were the rarest at all sites, whereas sediment nuclei dominated at most sites, suggesting their significance for understanding the origin of ferromanganese nodules. Hard-rock nuclei dominated at only three sites and probably originated from seamounts. Full article

Particle size and morphology analysis is a problem common to a wide range of applications, including additive manufacturing, geological and agricultural materials’ characterisation, food manufacturing and pharmaceuticals. Here, we review the use of microfocus X-ray computed tomography (X-ray CT) for particle analysis. We give an overview of different sample preparation methods, image processing protocols, the morphology parameters that can be determined, and types of materials that are suitable for analysis of particle sizes using X-ray CT. The main conclusion is that size and shape parameters can be determined for particles larger than approximately 2 to 3 $\mathsf{\mu }$m, given adequate resolution of the X-ray CT setup. Particles composed of high atomic number materials (Z > 40) require careful sample preparation to ensure X-ray transmission. Problems occur when particles with a broad range of sizes are closely packed together, or when particles are fused (sintered or cemented). The use of X-ray CT for particle size analysis promises to become increasingly widespread, offering measurements of size, shape, and porosity of large numbers of particles within one X-ray CT scan. Full article