Search Results (18)

In the age of artificial intelligence (AI), architectural practice faces a paradox of immense potential and creeping standardization. As humans are increasingly relying on AI-generated outputs, architecture risks becoming a spectacle of repetition—a shuffling of data that neither truly innovates nor progresses vertically in creative depth. This paper explores the critical role of data in AI systems, scrutinizing the training datasets that form the basis of AI’s generative capabilities and the implications for architectural practice. We argue that when architects approach AI passively, without actively engaging their own creative and critical faculties, they risk becoming passive users locked in an endless loop of horizontal expansion without meaningful vertical growth. By examining the epistemology of architecture in the AI age, this paper calls for a paradigm where AI serves as a tool for vertical and horizontal growth, contingent on human creativity and agency. Only by mastering this dynamic relationship can architects avoid the trap of passive, standardized design and unlock the true potential of AI. Full article

The building industry contributes to the global environmental challenges; however, sustainable solutions provide opportunities for a relevant architectural response. It is the architect’s role to design with consideration of those issues and potential solutions. The objective of this paper was to evaluate the extent to which architecture graduates demonstrate their knowledge about sustainability principles. A total of 346 Bachelor’s and Master’s theses, defended at the Faculty of Architecture, Wrocław University of Science and Technology in 2023, were analysed in terms of Frequency of Occurrence of Sustainable Priority Areas distinguished based on key contemporary policies. In order to validate and compare the results, a baseline from projects submitted to a sustainable competition was prepared. The analysis revealed that only 40% of the examined theses addressed priority areas. An average difference of 56.6% in the Frequency of Occurrence of priority areas was noted between theses and competitions abstracts. Furthermore, tendencies within Frequency of Occurrence of sustainability priorities, as well as formal requirements of the Polish higher education system, were identified and reviewed. Based on all findings, preliminary diagnoses and respective recommendations were proposed. This study is a foundation for further research on architecture graduates’ readiness to tackle environmental challenges within architecture. Full article

The imminent closure of seventeen mining sites in the Wonnarua Nation in Australia’s Hunter Valley over the next two decades has significant social, cultural, and economic implications. Transitioning to a post-mining future requires integrating rehabilitation efforts with socio-cultural and economic considerations. Speculative design and co-design approaches involving stakeholders from local communities, industry, and government offer alternative solutions for this complex scenario. This paper examines how architects can engage effectively in such transitions by using mixed-methods research, which includes in-class analysis, synthesis and design observation, and qualitative data from student interviews involved in a master’s degree at the architectural design studio exploring the future of a major coal mine in Australia. In contrast to the conventions of assessing “before” and “after” conditions that propose a singular answer to the research, this paper describes the innovative testing of these wicked problems in the setting of the creative design studio. Anticipating the potential for multi-stakeholder co-design processes, the outcomes of this research extend beyond local perspectives. The overarching project, of which this experiment is a key part, aims to identify valuable opportunities for landscape rehabilitation in the Hunter Valley and help to articulate a scalable and replicable process that can be applied to address the environmental challenges faced in other Australian regions. This in-class approach presented the opportunity to rethink and reframe the methods used by reflecting on the interview feedback from students. This can enable students to actively engage in design-based responses to impending mine closure and promote inclusive planning in post-mining landscapes. Full article

The exceptional architecture designed by master architects is a shared treasure of humanity, which embodies their design skills and concepts not possessed by common architectural designers. To help ordinary designers improve the design quality, we propose a new artificial intelligence (AI) method for generative architectural design, which generates designs with specified styles and master architect quality through a diffusion model based on textual prompts of the design requirements. Compared to conventional methods dependent on heavy intellectual labor for innovative design and drawing, the proposed method substantially enhances the creativity and efficiency of the design process. It overcomes the problem of specified style difficulties in generating high-quality designs in traditional diffusion models. The research results indicated that: (1) the proposed method efficiently provides designers with diverse architectural designs; (2) new designs upon easily altered text prompts; (3) high scalability for designers to fine-tune it for applications in other design domains; and (4) an optimized architectural design workflow. Full article

On university campuses, retrofitting studies have historically concentrated on individual buildings (or building components) instead of the entire campus. In the present paper, we examine how an incorporated strategic planning strategy might be used to investigate the socio-technical construction of a campus retrofit operation throughout multiple scale/sectors. The campus of the University of Oradea (CUO), Romania, with its beginnings in the 1910s was investigated using its new master plan. The developed strategies for a “green” and “healthy” campus depict a CUO redesign involving complex solutions for the green renovation of old buildings. In addition, the improvement effects of the modernization interventions already carried out were analyzed and quantified. Sixteen buildings (30% of the built area) were consolidated/rehabilitated/modernized, and/or equipped in the last decade, seven educational spaces being included in the circuit of the buildings fund (totaling 5491.59 sq m). For the renovated spaces, energy consumption was reduced by 20–88% and CO₂ emissions by 41.82–86%, depending on the specifics of each space. The reconfiguration, rehabilitation, and energy efficiency of the entire heating system of CUO (which uses geothermal water as a specific characteristic) significantly improved (20% decrease in energy and 21% decrease in geothermal water consumption). Our findings offer new directions and design solutions for the ecological modernization of other outdated university campuses, highlighting new perspectives in the green university campuses’ management, as a way to implement sustainability in the higher education environment. Data presented give professionals in the field (architects, designers, engineers, planners, and decision makers) a clear picture of the benefits due to ecological renovation, also offering the necessary tools to implement new solutions for reducing the impact of urban areas on the environment. Full article

The change of territorial organisation in the 18th century in Spain was strongly related to the preservation of the local heritage. Academic architects, military engineers, and master builders coexisted to carry out the design and management of municipal construction works. The evolution of the figure of the master builder and the confrontation with architects and the guilds since the creation of the Royal Academy of Fine Arts of San Fernando posed an inflection point in this aspect. The first aim of the present study was to highlight the figure of Vicente López Cardera, master builder in the Council and Diocese of Córdoba between the late 18th century and the early 19th century, through his work on the municipal interventions in the maintenance of the construction works and infrastructures in Montilla (Córdoba, Spain) around the year 1794. The second aim of the study was to emphasise the role of graphic engineering in the conservation of municipal heritage in the Modern Age through the study of drawings and plans provided by him in the analysed documentation. His thinking in the approach to these works fits with the ideas of social hygienic improvements that began with the Enlightenment as well as with the concept of sustainable development in culture; hence, his work is relevant in the sustainable development planning of cities in the present. With this study, missing heritage elements are also revealed, opening future lines of research that lead to their virtual reconstruction and the promotion of tourism in rural areas. Full article

The implementation of building information modeling (BIM) methodology in the construction industry has wide applicability with recognized benefits when designing, constructing, and operating buildings. To stay competitive in business, companies are urged to recruit professionals that offer brand-new knowledge and skillsets. To meet this demand, BIM training regarding the concept, range of applications, and tools available is required within the construction profession. A recent short course organized by the University of Lisbon, Portugal, actualized with the most relevant achievements in Master’s degree research, was offered to professionals in the industry, namely, architects and civil engineers coming from diverse engineering areas such as the environment, construction, maintenance, contracting and surveyors, and from patrimonial enterprises and public organizations, as well as city councils. The proposed action covers the areas of construction (conflict analysis, planning, and material quantity), structures (interoperability, analyses, and the transfer of information between software types), and the most recent heritage building information modeling (HBIM) perspectives. The methodology used was based on the presentation of case studies related to situations of conflict between disciplines, interoperability problems, and the structural rehabilitation of old buildings. The difficulties found in the course are mainly due to the heterogeneity of the participating population, who have different interests and specific perspectives. The participants followed the course with great interest and satisfaction, formulating several questions directed at the particular field of expertise of each professional. In general, the participants indicated a positive score, and changes in response to negative feedback will be adopted in future courses. The course aims to contribute to the dissemination of the potential of BIM in the design, construction, and refurbishment of historical buildings. Full article

This paper first analyzes the climate characteristics of five typical cities in China, including Harbin, Beijing, Shanghai, Shenzhen and Kunming. Then, based on Grasshopper, Ladybug and Honeybee analysis software, according to the indoor layout of typical residential buildings, this research extracts design parameters such as the depth and width of different rooms and their window-to-wall ratios etc., to establish a climate responsive optimization design process with indoor lighting environment comfort, with heating and cooling demand as the objective functions. Meanwhile, based on Monte Carlo simulation data, ANN (Artificial Neural Network) is used to establish a prediction model to analyze the sensitivity of interior design parameters under different typical cities’ climatic conditions. The study results show that the recommended values for the total width and total depth of indoor units under the climatic conditions of each city are both approximately 14.97 m and 7.88 m. Among them, under the climatic conditions of Harbin and Shenzhen, the design parameters of residential interiors can take the recommended value of UDI optimal or nZEB optimal. While the recommended values of window-to-wall ratios for the north bedroom, master bedroom and living room in Shanghai residential interiors are 0.26, 0.32 and 0.33, respectively. The recommended value of the window-to-wall ratio of the master bedroom in Kunming residences is 0.36, and that of the remaining rooms is between 0.15 and 0.18. The recommended values of window-to-wall ratios for the master bedroom and living room in Beijing residences are 0.41 and 0.59, respectively, and that for the remaining rooms are 0.15. The multi-objective optimization process based on parametric performance simulation used in the study can effectively assist architects in making energy-saving design decisions in the preliminary stage, allowing architects to have a case to follow in the actual design operation process. Full article

Human activity has required, since its origins, stones as raw material for carving, construction and rock art. The study, exploration, use and maintenance of building stones is a global phenomenon that has evolved from the first shelters, manufacture of lithic tools, to the construction of houses, infrastructures and monuments. Druids, philosophers, clergymen, quarrymen, master builders, naturalists, travelers, architects, archaeologists, physicists, chemists, curators, restorers, museologists, engineers and geologists, among other professionals, have worked with stones and they have produced the current knowledge in heritage stones. They are stones that have special significance in human culture. In this way, the connotation of heritage in stones has been acquired over the time. That is, the stones at the time of their historical use were simply stones used for a certain purpose. Therefore, the concept of heritage stone is broad, with cultural, historic, artistic, architectural, and scientific implications. A historical synthesis is presented of the main events that marked the use of stones from prehistory, through ancient history, medieval times, and to the modern period. In addition, the main authors who have written about stones are surveyed from Ancient Roman times to the middle of the twentieth century. Subtle properties of stones have been discovered and exploited by artists and artisans long before rigorous science took notice of them and explained them. Full article

The article examines the principles of Giancarlo De Carlo’s design approach. It pays special attention to his critique of the modernist functionalist logic, which was based on a simplified understanding of users. De Carlo′s participatory design approach was related to his intention to replace of the linear design process characterising the modernist approaches with a non-hierarchical model. Such a non-hierarchical model was applied to the design of the Nuovo Villaggio Matteotti in Terni among other projects. A characteristic of the design approach applied in the case of the Nuovo Villaggio Matteotti is the attention paid to the role of inhabitants during the different phases of the design process. The article explores how De Carlo’s “participatory design” criticised the functionalist approaches of pre-war modernist architects. It analyses De Carlo’s theory and describes how it was made manifest in his architectural practice—particularly in the design for the Nuovo Villaggio Matteotti and the master plan for Urbino—in his teaching and exhibition activities, and in the manner his buildings were photographs and represented through drawings and sketches. The work of Giancarlo De Carlo and, especially, his design methods in the case of the Nuovo Villaggio Matteotti can help us reveal the myths of participatory design approaches within the framework of their endeavour to replace the representation of designers by a representation of users. The article relates the potentials and limits of De Carlo’s participatory design approach to more contemporary concepts such as “negotiated planning”, “co-production”, and “crossbenching”. The article also intends to explore whether there is consistency between De Carlo’s theory of participation and its application. Full article

Examining an interdisciplinary university course for architecture, wood science, and engineering students, this paper studies how the students’ ability to master digital workflows influenced their success in learning collaborative design skills. It highlights potential challenges and opportunities posed by the introduction of new digital tools to support emerging integrated building design in both education and professional practice. The particular course focuses on the wood industry, which is rapidly changing from a very traditional to a highly innovative sector and increasingly embracing the latest technological developments in computational design, simulation, and digital fabrication. This study explores the influence of parametric design on collaboration dynamics and workflow within an interdisciplinary group of students embodying the roles of manufacturer, engineer, and architect. Student-generated data of the first three years of the class is analyzed thematically to find correlations with productive collaborations. Focusing on a stage of an evolving teaching and learning process, this analysis allows identifications of common themes and patterns, suggesting implications for practice and future research. The course highlights the need to integrate data interoperability, collaboration skill-building, and material awareness in contemporary digitally enabled architecture, engineering, and construction education. The lessons learned in this course can be of value to academic programs and professional firms involved in incorporating digital design and interdisciplinary collaboration. Full article

Stable access to affordable quality housing is a core feature of public health principles and practices. In this report, we provide an update on the research project “Mapping Public Housing: A Critical Review of the State-subsidised Residential Architecture in Portugal (1910–1974)” (MdH), developed between 2016 and 2019 at the Faculty of Architecture of the University of Porto (FAUP) in Portugal. This funded research project (PTDC/CPC-HAT/1688/2014) brought together an international and multidisciplinary team composed of architects, sociologists, historians, an economist, an anthropologist, information scientists and archivists, from different academic levels (senior researchers, postdoctoral, PhD and Master’s degree students), adopting a variety of approaches and operating in a range of different contexts. The aim of the research undertaken was to investigate the reality of social and state-subsidised housing in terms of its architecture, while, at the same time, seeking to broaden our understanding of this phenomenon and of the transition to a democratic regime. Furthermore, this research project was designed to contribute towards the development of common ground for supporting decisions in the environmental, social and economic fields relating to housing management, as well as architectural heritage management and protection. This review is based on the submitted application (2015) and final report (2020). Full article

In architecture, landscape architecture, and urban design, entangled multiscale and multidomain, or compound, sustainability problems and associated design requirements are becoming rapidly more demanding, complex, and interdisciplinary due to demographic, social, economic, environmental, and technological changes. This places considerable pressure on developing adequate pedagogical approaches to provide the next generation of architects, landscape architects, and urban designers with the knowledge, approaches, and skills to meet these challenges. This article discusses an attempt to develop an adequate pedagogy for a research-integrated master-level design studio along a multimethod approach. Key concepts, approaches, and methods are discussed, along with selected studio projects and a follow-up master thesis project. The projects are examined in terms of their responses to the themes, concepts, approaches, and methods of the pedagogical approach. Finally, further questions concerning the development of the portrayed pedagogical approach are discussed. Full article

This novel study explores the driving forces and dynamics of rapid urbanization, highlighting the main causes and effects of urban explosion, environmental disruption, and city pattern transformation. This study was carried out that how urbanization and urban sprawl have influenced the structure of the city of Sulaymaniah in Kurdistan region of Iraq. This is because over the years many urban areas have experienced dramatic growth and population explosion that has resulted in the exhaustion of social amenities in the concerned communities. For this purpose, a qualitative method is used based on in-depth face-to-face interviews with local authority, including planners, architects, and experts of master planning, as well as professors in the academic institutions. This study also utilizes extensive document analysis to present the evolution of urban growth. The findings reveal that the autonomy, political conflict, non-implementation of master plans, and economic prosperity are the driving forces which are accelerating this urbanization process. It is proposed that the practical policies and strategic urban development plans are urgent requirement to control the unplanned urban growth and stimulate the desired sustainable future urban development. Full article

In the transition from the Middle Ages to the Modern Era, Hernan Ruiz I worked as master builder of the Cathedral of Cordoba. His works exemplify the adoption of an artistic language resulting from the symbiosis of Gothic, Renaissance and Islamic formulas. In this paper, we demonstrate the imprint of the Andalusi aesthetic in this master’s work. Through an analysis of his building works and the evolution of his style, we show that Hernan Ruiz I’s legacy is more important than what historiography has previously suggested, which has only addressed the transition in his architectural style from Gothic to Renaissance and has overlooked the impact of Andalusi formulas in his work. Hernan Ruiz I bore witness to an important change in the mentality and aesthetic tastes of his time, and although his son, Hernan Ruiz II, gained greater recognition for his work, his father was able to adapt a church model imbued with the medieval spirit to the demands of the new patrons, namely the nobility and high clergy. These clients imposed their tastes, which were anchored in the past, but were open to new Renaissance influences due to their humanistic training and, at the same time, attracted by the exoticism and prestige of Andalusi art. Full article