Search Results (192)

Mining activity in Peru generates environmental liabilities with the potential to release toxic metals into the environment. This study conducted a comprehensive physical, chemical, mineralogical, and toxicological characterization of ten active and inactive tailings samples from the Arequipa region in southern Peru. Particle size distribution analysis, inductively coupled plasma atomic emission spectroscopy (ICP-AES), scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and the Toxicity Characteristic Leaching Procedure (TCLP) followed by ICP-MS were employed. The results revealed variable particle size distributions, with the sample of Secocha exhibiting the finest granulometry. Chemically, 8 out of 10 samples exhibited concentrations of at least two metals surpassing the Peruvian Environmental Quality Standards (EQS) for soils with values reaching >6000 mg/kg of arsenic (Paraiso), 193.1 mg/kg of mercury (Mollehuaca), and 2309 mg/kg of zinc (Paraiso). Mineralogical analysis revealed the presence of sulfides such as arsenopyrite, cinnabar, galena, and sphalerite, along with uraninite in the Otapara sample. In the TCLP tests, 5 out of 10 samples released at least two metals exceeding the environmental standards on water quality, with concentrations up to 0.401 mg/L for mercury (Paraiso), 0.590 mg/L for lead (Paraiso), and 9.286 mg/L for zinc (Kiowa Cobre). These results demonstrate elevated levels of Potentially Toxic Elements (PTEs) in both solid and dissolved states, reflecting a critical geochemical risk in the evaluated areas. Full article

Blood concentrations of essential trace elements can be used to diagnose conditions and diseases associated with excess or deficiency of these elements. Inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and graphite furnace atomic absorption spectrometry (GF-AAS) have been employed for such measurements, but maintenance and operation costs are high. X-ray fluorescence (XRF) detectability in cutaneous blood of iron (Fe), copper (Cu), zinc (Zn), and selenium (Se) was assessed as an alternative to ICP-MS. Three phantoms were made up of two polyoxymethylene (POM) plastic cylindrical cups of 0.6 mm and 1.0 mm thick walls and a 5.3 mm diameter POM cylindrical insert. Six aqueous solutions of Fe in 0 to 500 mg/L and Cu, Zn, and Se in 0 to 50 mg/L concentrations were poured into the phantoms to simulate X-ray attenuation of skin. Measurements using an integrated X-ray tube and polycapillary X-ray lens unit generated 24 calibration lines. Detection limit intervals in mg/L were (36–100), (14–40), (3.7–10), and (2.1–3.4) for Fe, Cu, Zn, and Se, respectively. Fe was the only element with detection limits lower than its 480 mg/L median human blood concentration. The estimated radiation dose and equivalent dose to skin were below those of common radiological procedures. Applications will require further instrumental development and finding a calibration method. Full article

In the framework of lateritic material valorization, we demonstrated how the geological environment determines the mineralogical characterizations of two laterite samples, KN and LA. KN and LA originate from the Birimian and Precambrian environments, respectively. We showed that the geological criterion alone does not determine the applicability of these laterites as potential adsorbents but must be associated with their physicochemical properties. The characterizations were carried out using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Thermal analysis, and Atomic Emission Spectrometry Coupled with an Inductive Plasma Source. The major mineral phases obtained by X-ray diffraction analysis coupled with infrared analysis showed that the KN and LA laterite samples were composed of quartz (33.58% to 45.77%), kaolinite (35.64% to 17.05%), hematite (13.36% to 11.43%), and goethite (7.44% to 6.31%). The anionic exchange capacity of the KN and LA laterites ranged from 86.50 ± 3.40 to 73.91 ± 9.94 cmol(-)·kg⁻¹ and from 73.59 ± 3.02 to 64.56 ± 4.08 cmol(-)·kg⁻¹, respectively, and the cation exchange capacity values are in the order of 52.3 ± 2.3 and 58.7 ± 3.4 cmol(+)/Kg for the KN and LA samples, respectively. The specific surface values determined by the BET method were 58.65 m²/g and 41.15 m²/g for the KN and LA samples, respectively. The effects of adsorbent doses on As(III,V), Pb(II), and Cu(II) adsorption were studied. At 5 mg/L As and 15 g/L adsorbent (pH 6.5–7), arsenate removal was 99.72 ± 0.35% and 99.58 ± 0.45% for KN and LA, respectively, whereas arsenite removal reached 83.52 ± 2.21% and 98.59 ± 0.64% for LA and KN, respectively. The Pb(II) and Cu(II) removal rates were 74.20 ± 0.95% for 2.4 g/L KN and 54.18 ± 0.01% for 8 g/L KN, respectively. Based on their physicochemical and mineralogical characteristics, the KN and LA laterite samples were shown to possess a high potential as adsorbent material candidates for removing heavy metals and/or anionic species from groundwater. Full article

Zucchini (Cucurbita pepo subsp. pepo) is a seasonal vegetable (also known as courgette) characterized by health properties due to the content of several bioactive molecules. For this reason, the consumption of zucchini is highly recommended as a part of the Mediterranean diet. The aim of this study was to evaluate the possible influence of a specific compost supply for shifting the characteristics of an integrated agriculture toward a biodynamic standard following Demeter^® certified rules. In particular, an approach based on ¹H-Nuclear Magnetic Resonance (NMR) spectroscopy and multivariate statistical analysis (MVA) was applied to analyze the differences between the metabolic profiles of the zucchini samples (with the same cultivar, Vitulia), obtained from three different agronomical practices: two focused agricultural systems (compost supplied and integrated), as well as the used benchmark (Demeter biodynamic certified). The obtained results showed that the samples from the plots managed with biofertilizer from compost showed similar behaviour to the samples managed under Demeter biodynamic certification, with higher content of some amino acids, such as arginine, and lower content of sugars than the samples from integrated farming. The concentration of twenty elements was then determined using inductively coupled plasma atomic emission spectroscopy (ICP-AES). The averaged results of the elemental data appear almost parallel to the trend observed with the metabolomics approach. In the present case, the use of a specific compost as a biofertilizer has shown to promote the transition to the quality standards of the Demeter certification, significantly improving the crops’ sustainability. Full article

The potentially toxic metals in soil often cause secondary pollution of vegetables and pose a great threat to human health. Soil and vegetable samples were collected from eight different districts in the vegetable plantation base of Lanzhou city in Gansu province, and Zn, Cd, Cr, Cu, and Pb contents were determined using inductively coupled plasma atomic emission spectroscopy (ICP-AMS). The results suggested that the Cr and Zn contents of soils in the eight plantation bases were much higher than those of the other three metals. The metal contents showed significant differences among plantation bases and vegetable species, and the mean potentially toxic metal concentrations in soils exceeded background levels by 1.1~3.0 times. The accumulation of Cu in vegetables was significantly higher than that of other metals. Remarkable differences were found among the vegetables in the uptake abilities of Zn, Cd, Cr, and Cu. There were significant positive relationships between potentially toxic metal accumulation in vegetables and in soils. The results may be used to provide referential strategies and methods to minimize the impact of potentially toxic metals on human health through the consumption and cultivation of vegetables. Full article

During an Antarctic expedition that took place in December 2010–January 2011 in the East Antarctic coastal region, soil samples were collected in aseptic conditions and stored for over a decade in freezers at −20 °C. Due to the shortly afterward passing of the Antarctic researcher in charge, Teodor Negoiță, the samples remained unintentionally frozen for a long period and were made available for research 13 years later. A chemical analysis of soil as well as screening for viable microbial presence was performed; soil analysis was conducted via inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Fourier-transform infrared spectroscopy coupled with attenuated total reflection (FTIR-ATR). The presence of aerobic and facultative aerobic microbiotas was evaluated through a Biolog Ecoplates assay, and isolated strains were 16S sequenced for final taxonomic identification. The results obtained new insights into Antarctic soil characteristics from both chemical and microbiological aspects, even after over a decade of conservation. Full article

The unintentional release of nanoparticles in the atmosphere and their targeted application to improve plant productivity requires detailed study. The translocation features of copper and gold nanoparticles applied by spraying in the concentration range of 1–100 mg/L in Petroselinum crispum (Mill.) tissues during a 10-day experiment were investigated. Atomic absorption spectrometry and inductively coupled plasma atomic emission spectroscopy showed that copper and gold nanoparticles applied to the leaves’ surface could accumulate in plant organs. A dose-dependent increase in the content of copper and gold in the aerial parts of parsley was revealed. The content of copper in leaves treated with nanoparticles was 1–2.3 times higher than the control, while the content of gold exceeded control values 2–116 times. The effect of nanoparticles on plants’ biochemical composition was assessed. The antioxidant tests showed an ambiguous response at exposure to metal nanoparticles. Copper nanoparticles at the applied concentration consistently reduced both chlorophyll and carotenoid content. Gold nanoparticles enhanced the chlorophyll and carotenoid level at low concentrations (1 mg/L) and significantly inhibited it at higher concentrations. The parsley exposed to nano-copper remained safe for human consumption, but parsley containing more than 14.9 mg/kg of gold may adversely affect human health. Full article

Heavy metal pollution has become an increasingly serious environmental issue, making the detection of heavy metals essential for safeguarding public health and the environment. This review aims to highlight the commonly used methods for detecting heavy metals (such as atomic absorption spectroscopy (AAS), atomic emission spectroscopy (AES), inductively coupled plasma–mass spectrometry (ICP-MS), square-wave anodic stripping voltammetry (SWASV), etc.), with a particular focus on electrochemical detection and electrode modification materials. Metal nanomaterials (such as titanium dioxide (TiO₂), copper oxide (CuO), ZIF-8, MXene, etc.) are emphasized as promising candidates for enhancing the performance of sensors due to their high surface area and excellent catalytic properties. However, challenges such as interference from non-target heavy metal ions and the formation of organometallic complexes with organic compounds can complicate the detection process. To address these issues, two potential solutions have been proposed: the development of advanced algorithms (such as machine learning (ML), back-propagation neural network (BPNN), support vector machines (SVM), random forests (RF), etc.) for signal processing and the use of pretreatment methods (such as Fenton oxidation (FO), ozone oxidation, and photochemical oxidation) to suppress such interferences. This paper aims to review commonly used methods for detecting heavy metals, with a particular emphasis on electrochemical techniques. It will also highlight the challenges faced in these methods, such as interference and sensitivity limitations, and propose innovative solutions, including the use of metal nanomaterials for improved sensor performance and the integration of advanced algorithms and pretreatment techniques to address interference and enhance detection accuracy. Full article

This study aimed to investigate the chemical composition and bioactivities of essential oils (EOs) from five Moroccan thyme species: Thymus broussonetii subsp. broussonetii, T. maroccanus, T. willdenowii, T. zygis subsp. gracilis, and T. satureioides, collected from various geographical regions. Gas chromatography–mass spectrometry (GC-MS) identified thymol, p-cymene, borneol, γ-terpinene, carvacrol, α-pinene, and camphene as major constituents, with variations across species. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) revealed important levels of calcium (450.6–712.2 mg/kg), potassium (255.4–420.7 mg/kg), magnesium (97.3–150.7 mg/kg), and iron (1.95–15.1 mg/kg). The EOs demonstrated strong antioxidant activity in DPPH, FRAP, and β-carotene bleaching assays. Insecticidal activity against Aphis gossypii revealed the highest efficacy with T. willdenowii EO (LC₅₀ = 6.2 µL/mL), followed by T. maroccanus and T. zygis subsp. gracilis. Additionally, the EOs exhibited potent enzyme inhibitory effects at 1 mg/mL on acetylcholinesterase (83.1–96.4%), tyrosinase (77.5–89.6%), and α-glucosidase (79.4–89.5%). These findings suggest that thyme EOs, particularly from T. willdenowii, T. zygis, and T. maroccanus, are promising candidates for integrated pest management and natural enzyme inhibitors. Their potential applications in medicinal and pharmaceutical fields underscore the need for further research to optimize their use under specific conditions and dosages. Full article

The agroindustry generates substantial quantities of byproducts, particularly in coffee production, which yields significant waste, most notably spent coffee grounds (SCGs). This study explores the potential of SCGs as a versatile resource for applications in both food and nonfood sectors. A comprehensive chemical analysis revealed that SCGs consist of 30.2 wt.% cellulose, 25 wt.% hemicellulose, and 12 wt.% lignin. Morphological characterization was performed using field emission scanning electron microscopy (FESEM). Additional analyses included attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis (TGA). ATR-FTIR identified key polysaccharides and oils, whereas TGA offered insights into the thermal degradation behavior of SCGs, confirming the presence of typical plant cell wall components. X-ray diffraction (XRD) patterns revealed low crystallinity, consistent with SCGs’ amorphous structure. Mineral content was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES) and atomic absorption spectrophotometry (AAS). The results showed that mineral concentrations in SCGs (per 0.01 kg) were within recommended daily intake limits, confirming their safety for potential human consumption. These findings establish SCGs as a valuable lignocellulosic biomass with applications in composite materials. Additionally, it can serve as an organic soil amendment after fermentation to prevent stress on plants. This approach supports effective waste management and advances resource sustainability practices in the agro-industrial sector. Full article

Cu/Ce binary oxides were prepared via the one-pot solvothermal method, and the effects of different cerium precursors (cerium nitrate and cerium ammonium nitrate) on the catalytic activity and resistance to water vapor or CO₂ of the prepared samples for low-temperature CO oxidation reaction were investigated. The physicochemical characteristics of the catalysts were characterized via thermal analyses (TG-DSC), X-ray diffraction (XRD), Raman spectroscopy, N₂ adsorption/desorption, inductively coupled plasma-atomic emission spectrometry (ICP-AES), X-ray photoelectron spectroscopy (XPS), in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTs), and temperature-programmed reduction with H₂ (H₂-TPR). The results indicated that the CuO/CeO₂ catalyst (CC-N) prepared with cerium nitrate showed higher activity for low-temperature CO oxidation, which can be ascribed to its larger specific surface area and pore volume, higher amounts of highly dispersed CuO species with strong interaction with CeO₂, Cu⁺ species, and more active surface oxygen species, compared with the counterpart prepared with cerium ammonium nitrate (CC-NH). Furthermore, the CC-N catalyst also exhibited better resistance to CO₂ poisoning than CC-NH. Full article

The study, carried out as part of the International Cooperative Program on Effects of Air Pollution on Natural Vegetation and Crops, involved collecting 95 moss samples across the territory of Georgia during the period from 2019 to 2023. Primarily samples of Hypnum cupressiforme were selected, with supplementary samples of Abietinella abietina, Pleurozium schreberi, and Hylocomium splendens in cases of the former’s absence. The content of 14 elements (Al, Ba, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, S, Sr, V, and Zn) was detected using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), while the Hg content was determined using a Direct Mercury Analyzer. To identify any relationships between chemical elements and to depict their sources, multivariate statistics was applied. Principal component analysis identified three main components: PC1 (geogenic, 43.4%), PC2 (anthropogenic, 13.3%), and PC3 (local anomalies, 8.5%). The results were compared with the first moss survey conducted in Georgia in the period from 2014 to 2017, offering insights into temporal trends of air quality. Utilizing GIS, a spatial map illustrating pollution levels across Georgia, based on the Pollution Load Index, was generated. The Potential Environmental Risk Index emphasized significant risks associated with mercury and cadmium at several locations. The study highlights the utility of moss biomonitoring in assessing air pollution and identifying hotspots of contamination. The findings from this study could be beneficial for future biomonitoring research in areas with varying physical and geographical conditions. Full article

In this work, a kinetic study and modeling of the decomposition of a rock sample in an ascorbic acid medium with a high content of lepidolite phase were carried out, the results of which are of great importance due to the sample’s high lithium (Li) content. The rock sample was characterized by X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and X-ray photoelectron spectroscopy (XPS), and the mineral species detected in the sample were lepidolite, at 65.3%, quartz, at 30.6%, and muscovite, at 4.1%, with a quantitative chemical analysis indicating the presence of elements such as Li, Si, K, Na, O, Al and, to a lesser extent, Fe and Ti; this highlights that the Li content present in the sample was 3.38%. Lithium was the element with which the chemical analysis of the kinetics was performed, resulting in decomposition curves comprising the induction period, progressive conversion and stabilization; this highlighted that the reaction progressed during the first two periods, obtaining a reaction order (n) of 0.4307 for the induction period and an activation energy (Ea) of 48.58 kJ mol⁻¹, followed by a progressive conversion period with n = 0.309 and Ea = 25.161 kJ mol⁻¹. This suggested a mixed control regime present in the lower temperature ranges, with a transition from chemical control to transport control present at high temperatures, with the study of the nature of the reaction and the concentration effect showing that chemical control predominates. The kinetic parameters and kinetic expressions for both periods were obtained, with the modeling showing that the calculated and experimental data do not present a major discrepancy. Full article

Inaouen wadi is the second largest tributary of the Sebou river, one of Morocco’s major rivers, which holds significant economic and social importance. Unfortunately, this watercourse is severely impacted by pollution from various human activities, particularly industrial sources. However, available data on the presence of potentially toxic elements (PTEs) that could harm human health in this region remain limited. PTEs pose major environmental risks due to their toxicity, persistence, and bioaccumulation. This study aimed to assess the concentrations of PTEs in the sediments of Inaouen wadi and its main tributaries based on sediment samples collected from 12 locations in 2019. The concentrations of Cd, Pb, Cr, Ag, Al, Cu, Fe, and Zn were measured using inductively coupled plasma atomic emission spectroscopy (ICP–AES), and sediment contamination levels were evaluated using multiple indices: the enrichment factor (EF), the geo-accumulation index (Igeo), the potential ecological hazard index (RI), and the modified ecological risk index (MRI). The results indicate that concentrations of Pb, Cd, Cr, Cu, Fe, and Zn are significantly influenced by urban discharges, particularly at sites S1, S3, and S5 near the cities of Taza and Oued-Amlil. The maximum values recorded were 7.01 g/kg for Pb, 0.9 g/kg for Cd, 0.1 g/kg for Cr, 19.9 g/kg for Fe and 1.9 g/kg for Zn. The enrichment factor (EF) revealed anthropogenic sources of Fe and Pb, confirming the human origin of these elements. The geo-accumulation index (Igeo) showed that the areas around stations S1, S3, and S5 are highly contaminated by Pb, Cd, and Fe, a finding also supported by the MRI. The study identified potential ecological risks at stations S1, S3, and S5, highlighting the urgent need for improved pollution management practices to mitigate environmental risks. Full article

Biochar is a carbon-rich material that has recently received attention due to its increasing agronomical potential. The agricultural utilization of biochar relates to its potential to act in the soil as a soil conditioner; nevertheless, complex information on the direct dependence of biochar’s physical properties (texture, particle size) and corresponding leaching and availability of organic molecules (e.g., the polycyclic and heterocyclic organic compounds) and inorganic mineral salts (based on micro- and macroelements) is still inconsistent. Multi-elemental analysis by using inductively coupled plasma atomic emission spectroscopy (ICP-OES) was used to assess the information on the contents and availability of macro- and microelements in studied commercial biochar samples. The results showed a statistically significant indirect relation between an increase in the size fraction of biochar and the content of aqueous-extractable K and Na and the direct relation with the aqueous-extractable Ca, Mg, and P. Compared to the macroelements, the detected contents of aqueous-extractable microelements were almost three orders lower, and the dependence on fraction size was not consistent or statistically significant. In addition, gas chromatography (GC) coupled with mass spectroscopy (MS) was further used to reveal the concentrations of available polycyclic aromatic and heterocyclic compounds in biochar samples. The detected concentrations of these types of organic compounds were far below the certified limits, and a statistically significant indirect correlation with particle size was also observed for all the studied biochar samples. The proposed methodological concept could provide the necessary insights into the description of biochar mineral content and its connection to biochar texture, the physicochemical properties, and the potential of biochar to release nutrients into the soil. These findings could help in the further assessment of biochar as a soil conditioner in modern agriculture. Full article