Search Results (8)

Dynamic wireless power transfer (DWPT) systems for in-motion electric vehicle (EV) charging often suffer from unstable power delivery due to spatial variations in magnetic coupling caused by vehicle misalignment. This study presents a stabilization-oriented DWPT design methodology that prioritizes minimizing spatial variations of mutual inductance rather than maximizing peak coupling under perfect alignment. A ferrite-backed double-D coil configuration is analyzed and refined using three-dimensional finite-element electromagnetic modeling integrated with circuit-level co-simulation to evaluate coupling behavior, magnetic field homogeneity, and power transfer efficiency under realistic dynamic misalignment conditions. The proposed design achieves a coupling coefficient of 0.50–0.55 under aligned conditions and exhibits smooth, predictable degradation for lateral offsets up to 40–50 mm. Quantitative analysis demonstrates a low spatial coupling gradient of approximately 0.001 mm⁻¹, indicating that abrupt coupling transitions are effectively suppressed during vehicle motion. The system attains a maximum power transfer efficiency of 84.37% at an 80 mm air gap, while maintaining stable performance under both lateral and vertical displacement. Comparative evaluation shows improved misalignment tolerance and coupling stability relative to conventional double-D configurations. The results demonstrate that electromagnetic field shaping focused on coupling smoothness is an effective and practical strategy for reliable dynamic wireless charging of electric vehicles. Full article

The accelerated growth of the transport sector has increased oil consumption and greenhouse gas (GHG) emissions, intensifying global environmental challenges. The electrification of transportation has emerged as a key strategy to achieve sustainability targets, with electric vehicles (EVs) expected to account for 50% of global car sales by 2035. However, widespread adoption requires smart infrastructure capable of enabling dynamic in-motion charging. In this context, Electric Road Systems (ERSs), particularly those based on Wireless Power Transfer (WPT) technologies, offer a promising solution by transferring energy between road-embedded transmitters and vehicle-mounted receivers. This study assesses the structural response and service life of conventional and electrified asphalt pavement sections representative of the Spanish road network. Several standard pavement configurations were analyzed under heavy traffic (dual axles, 13 tons) using a hybrid approach combining mechanistic–empirical multilayer modeling and three-dimensional Finite Element Method (FEM) simulations. The electrified designs integrate prefabricated charging units (CUs) placed at a 9 cm depth, disrupting the structural continuity of the pavement. The results reveal stress concentrations at the CU–asphalt interface and service life reductions of up to 50% in semiflexible pavements. Semirigid sections performed better, with average reductions close to 40%. These findings are based on numerical simulations of standard Spanish sections and do not include experimental validation. Full article

This paper presents an innovative optimization framework for the co-management of dynamic electric vehicle (EV) charging lanes and power distribution networks, addressing grid stability amidst fluctuating EV charging demands. Integrating generative adversarial networks (GANs) and distributionally robust optimization (DRO), the framework models uncertainties in traffic flow and renewable energy generation, optimizing system performance under worst-case conditions to mitigate risks of grid instability. Applied to a highway with eight dynamic charging lanes (500 kW per lane), serving up to 50 EVs simultaneously, the framework balances energy contributions from 15 renewable generators (60% of the mix) and 10 non-renewable generators. Simulation results highlight its effectiveness, maintaining grid stability with voltage deviations within 0.02 p.u., reducing energy losses to under 0.8 MW during peak traffic (1500 vehicles per hour), and achieving 95% lane utilization. Dynamic charging enabled EV users to save USD 0.08 per kilometer through reduced stationary charging downtime, optimized travel efficiency, and lower energy costs. Additionally, the system minimizes maintenance costs by optimizing lane and grid reliability. This study underscores the potential of GAN-based DRO methodologies to enhance the efficiency of power grids supporting dynamic EV charging, offering scalable solutions for diverse regions and traffic scenarios. Full article

Electric-drive-reconstructed onboard chargers (EDROCs), also known as electric-drive-reconstructed power management systems, are a promising alternative to conventional onboard chargers due to their characteristics of low cost and high power density. The model predictive control offers a fast dynamic response, simple implementation, and the ability to control multiple targets simultaneously. In this paper, a two-stage multi-vector model predictive current control (MPCC) of a six-phase EDROC for solar-powered electric vehicles (EVs) is proposed. Firstly, the topology for the EDROC incorporating a six-phase symmetrical permanent magnet synchronous machine (PMSM) is introduced, and the operation principles of the DC charge mode, the drive mode, and, especially, the in-motion charge mode are analyzed in detail. After that, a two-stage multi-vector MPCC method is proposed by using the multi-vector MPC technique and designing a two-stage MPC structure to eliminate the regulation of the weighting factor of the MPC. Finally, the effectiveness of the proposed method is verified on a self-designed 2 kW EDROC platform. Full article

Dynamic wireless power transfer (DWPT) has garnered significant attention as a promising technology for electric vehicle (EV) charging, eliminating the need for physical connections between EVs and charging stations. However, the improvement in power transfer efficiency is a major challenge among the research community. Different techniques are investigated in the literature to maximize power transfer efficiency. The investigations include the power electronic circuit, magnetic coupler design, compensating capacitance and control technique. Also, the investigations are carried out based on the type of wireless charging system, which is either a static or dynamic scenario. There are a good number of review articles available on the power electronic circuit and compensator design aspects of WPT. However, studies on the controller design and tracking maximum efficiency are some of the important areas that need to be reviewed. This paper provides a comprehensive review of bibliometric analysis on the DWPT technology, design procedure, and control technique to increase the power transfer and socio-economic acceptance analysis. The manuscript also provides information on the challenges and future direction of research in the field of DWPT technology. Full article

Inductive power transfer (IPT) technology offers a promising solution for electric vehicle (EV) charging. It permits an EV to charge its energy storage system without any physical connections using magnetic coupling between inductive coils. EV inductive charging is an exemplary option due to the related merits such as: automatic operation, safety in harsh climatic conditions, interoperability, and flexibility. There are three visions to realize wireless EV charging: (i) static, in which charging occurs while EV is in long-term parking; (ii) dynamic (in-motion), which happens when EV is moving at high speed; and (iii) quasi-dynamic, which can occur when EV is at transient stops or driving at low speed. This paper introduces an extensive review for IPT systems in dynamic EV charging. It offers the state-of-the-art of transmitter design, including magnetic structure and supply arrangement. It explores and summarizes various types of compensation networks, power converters, and control techniques. In addition, the paper introduces the state-of-the-art of research and development activities that have been conducted for dynamic EV inductive charging systems, including challenges associated with the technology and opportunities to tackle these challenges. This study offers an exclusive reference to researchers and engineers who are interested in learning about the technology and highlights open questions to be addressed. Full article

Inductive power transfer (IPT) has been widely adopted as an efficient and convenient charging manner for both static and in-motion EVs. In this paper, a new hybrid topology is presented to improve the coupling tolerance under pad misalignment. The double inductor–capacitor–capacitor (LCC-LCC) network and series hybrid network combining the LCC-LCC topology and series-series (SS) topology are connected in parallel to provide better tolerance against self- and mutual inductance changes, particularly with a large Z-axis transmission distance. A double-DD quadrature pad (DD2Q) consists of a Q pad, and double orthogonal DD pads are analyzed in detail, which are employed to decouple the cross-mutual inductance. Moreover, a parametric design method based on the misalignment characteristics of the DD2Q pads is also proposed to maintain relatively constant power output. A 650-W hybrid topology with a fixed operating frequency of 85 kHz was built to verify the system’s feasibility. The size of the DD2Q pads was 280 mm × 280 mm, and the air gap was 100 mm. The results clearly show that the proposed hybrid topology can achieve a fluctuation within 5% in the output current with load varying from 100% full load to 25% light load conditions when the Z-axis transmission distance varies from 80 mm to 150 mm, and the maximum efficiency can reach 91% when the Z-axis transmission distance is 80 mm. Full article

Recently, the number of electric vehicles (EVs) is increasing due to the decline of oil resources and the rising of greenhouse gas emissions. However, EVs have not received full acceptance by consumers due to the limitations of the stored energy and charging problems. The dynamic or in-motion charging solution has become a suitable choice to solve the battery-related issues. Many researchers and vehicle manufacturers are working to develop an efficient charging system for EVs. In order to improve the efficiency of the dynamic wireless power transfer (DWPT), the electromagnetic coupling coefficient between the two parts of the coupler must be maximized. This paper was dedicated to find the optimal topology of a magnetic coupler with the best coupling factor while taking in consideration the displacement and the misalignment of the EV. The article is introduced by developing a methodology for characterizing the electrical parameters of couplers, followed by a comparative study of different forms of coils suitable for dynamic charging of electric vehicles. The particularity of the proposed study concerned the overall dimensions, or the areas occupied by the windings of the coils remaining the same for all the chosen shapes and corresponding to the surface that is actually available under the EV. Simulation and experimental tests were carried out to validate the proposed study. Full article