Search Results (170)

Palatability is a critical determinant of pet food performance, directly influencing voluntary intake, nutrient utilization, and therapeutic efficacy. In this systematic review, we examine peer-reviewed research publications, patent filings, and commercial product data pertaining to palatant technologies in dry and wet pet food from 2014 to 2024. Major palatant classes—including fats, proteins, yeast extracts, and novel plant-derived or insect-based hydrolysates—are evaluated for their physicochemical properties, flavor-release mechanisms, and stability during processing. We analyze formulation techniques such as microencapsulation, Maillard-reaction enhancement, and multilayer coating systems, focusing on their impact on aromatic compound retention and palatability consistency. Patent landscape assessment identifies over 15 key innovations in delivery systems, life-stage-specific palatant modulation, and dual-phase release architectures. Dual-phase release architectures are defined as systems that deliver active compounds in two sequential phases, such as immediate and sustained release. Sensory evaluation methodologies—ranging from multivariate preference mapping to descriptive analysis—are critically appraised to correlate human-panel metrics with canine and feline feeding behavior. We also discuss strategic integration of palatants at different processing stages (pre-conditioning, extrusion, and post-extrusion) and the challenges of balancing taste masking with nutritional requirements, particularly in formulations containing alternative proteins for sustainability. Despite rapid market growth in functional palatant-infused products, peer-reviewed literature remains relatively limited, suggesting opportunities for further research on species-specific flavor drivers, synbiotic flavor–nutrient interactions, and novel delivery platforms. This comprehensive overview of palatant science, patent innovations, and market evolution provides evidence-based guidance for researchers, formulators, and veterinarians seeking to optimize organoleptic properties and consumer acceptance of next-generation pet foods. Full article

Cystinosis is a rare systemic disease characterized by the accumulation of cystine in tissues, leading to multi-organ damage. Infantile nephropathic cystinosis is the dominant and severe form of cystinosis with critical renal manifestations that require kidney transplantation at an early age if left untreated. Cysteamine, the lifelong cystine-depleting therapy, is the mainstay treatment of nephropathic cystinosis. Cysteamine prevents cystine crystal formation and delays disease progression. While the initially introduced cysteamine consists of an immediate-release (IR) formulation, a delayed-release (DR) formulation has been developed with a simplified dosing regimen (Q12H instead of Q6H) and an improved quality of life while maintaining comparable efficacy. Due to the rare incidence of the disease and lack of international guidelines, diagnosis and treatment initiation are oftentimes delayed, leading to a poor prognosis. Pediatric and adult nephrologists from Kuwait, Saudi Arabia, the United Arab Emirates (UAE), and Qatar, in addition to one international expert from Amsterdam, convened to share their clinical experience, reflecting on the challenges encountered and therapeutic approaches followed in the management of nephropathic cystinosis in the Gulf Cooperation Council (GCC) region. Experts completed a multiple-choice questionnaire and engaged in structured discussions, where they shed light on gaps and limitations with regard to diagnostic tests and criteria to ensure early diagnosis and timely treatment initiation. Based on available literature, experts suggested an algorithm to help guide nephropathic cystinosis management in the GCC. It is highly recommended for patients who do not tolerate IR-cysteamine and do not adhere to IR-cysteamine treatment to switch to DR-cysteamine. Given the systemic nature of the disease, a multi-disciplinary approach is required for optimal disease management. Full article

This study focuses on the stabilization of a natural hair dye derived from Lawsonia inermis L. (henna) and Indigofera suffruticosa (indigo). Although various formulations already exist, they are designed for immediate use and cannot be stored. Lawsonia, a primary component of the dye, tends to degrade after release. To ensure its stability, freeze-drying was implemented as a protective measure. Colorimetric analysis confirmed the dye’s ability to maintain an intense, uniform coloration even after multiple washing cycles. Stability tests demonstrate that freeze-drying effectively enhances the dye’s stability and capacity to retain its physical properties and color under various environmental conditions, demonstrating its potential for long-term use. The dye’s pH (5.05) aligns with the natural pH of hair, promoting cuticle sealing and improving hair health. Cytotoxicity tests confirmed the dye’s safety, showing no harmful effects. Gray hair exhibited a total color difference (ΔE) of 64.06 after the initial application, using natural gray hair as a reference. By the third application, ΔE increased to 69.86 and gradually decreased to 68.20 after 15 washing cycles, highlighting its long-term durability. Gray hair exposed to 720 h of UV radiation showed a ΔE of 17.34, whereas dyed gray hair exhibited a ΔE of 2.96 compared to non-UV-exposed samples. This indicates superior resistance to color degradation in dyed hair. Also, SEM imaging revealed the dye’s restorative effects, progressively improving hair cuticle structure with each application. Full article

Background/Objectives: The formulation of microspheres for lipophilic drugs using aqueous methods, such as spray drying, faces significant challenges. The main objective of this study was to evaluate the effect of the process parameters and polymer selection on the production of microspheres by spray drying for a lipophilic drug. Methods: Lipophilic drug-loaded microspheres were developed using various polymers via the aqueous spray drying method. The effects of the factors on the yield percentage and encapsulation efficiency were analyzed. Microspheres preparation included Agave inulin, guar gum, hydroxypropyl methylcellulose, and Eudragit^® S100. A 2³ factorial design was performed, and the parameters were optimized. Results: Inlet temperature, feed flow, and polymer percentage showed a significant effect (p < 0.05) on the yield percentage of guar gum microspheres and encapsulation efficiency of the inulin microspheres. Inulin and guar gum microspheres showed the best yield percentage (75.41%) and encapsulation efficiency (100%), respectively. In addition, guar gum microspheres had the best morphology, and hydroxypropyl methylcellulose microspheres were smaller and had an irregular surface. Eudragit did not maintain its delayed release property due to limitations of the aqueous method; inulin released the drug immediately, and guar gum and hydroxypropyl methylcellulose microspheres prolonged release only by a few additional hours. Conclusions: The experimental design showed that optimizing the parameters (inlet temperature, feed flow, and the type and percentage of polymer) can regulate the microsphere development process to obtain improved product yield and encapsulation efficiency results. Full article

This study aimed to design dual-responsive chitosan–polylactic acid nanosystems (PLA@CS NPs) for controlled and targeted ledipasvir (LED) delivery to HepG2 liver cancer cells, thereby reducing the systemic toxicity and improving the therapeutic selectivity. Two formulations were developed utilizing ionotropic gelation and w/o/w emulsion techniques: LED@CS NPs with a size of 143 nm, a zeta potential of +43.5 mV, and a loading capacity of 44.1%, and LED-PLA@CS NPs measuring 394 nm, with a zeta potential of +33.3 mV and a loading capacity of 89.3%, with the latter demonstrating significant drug payload capacity. Since most drugs work through interaction with DNA, the in vitro affinity of DNA to LED and its encapsulated forms was assessed using stopped-flow and other approaches. They bind through multi-modal electrostatic and intercalative modes via two reversible processes: a fast complexation followed by a slow isomerization. The overall binding activation parameters for LED (cordination affinity, K_a = 128.4 M⁻¹, K_d = 7.8 × 10⁻³ M, ΔG = −12.02 kJ mol⁻¹), LED@CS NPs (K_a = 2131 M⁻¹, K_d = 0.47 × 10⁻³ M, ΔG = −18.98 kJ mol⁻¹) and LED-PLA@CS NPs (K_a = 22026 M⁻¹, K_d = 0.045 × 10⁻³ M, ΔG = −24.79 kJ mol⁻¹) were obtained with a reactivity ratio of 1/16/170 (LED/LED@CS NPs/LED-PLA@CS NPs). This indicates that encapsulation enhanced the interaction between the DNA and the LED-loaded nanoparticle systems, without changing the mechanism, and formed thermodynamically stable complexes. The drug release kinetics were assessed under tumor-mimetic conditions (pH 5.5, 10 mM GSH) and physiological settings (pH 7.4, 2 μM GSH). The LED@CS NPs and LED-PLA@CS NPs exhibited drug release rates of 88.0% and 73%, respectively, under dual stimuli over 50 h, exceeding the release rates observed under physiological conditions, which were 58% and 54%, thereby indicating that the LED@CS NPs and LED-PLA@CS NPs systems specifically target malignant tissue. Release regulated by Fickian diffusion facilitates tumor-specific payload delivery. Although encapsulation did not enhance the immediate cytotoxicity compared to free LED, as demonstrated by an in vitro cytotoxicity in HepG2 cancer cell lines, it significantly enhanced the therapeutic index (2.1-fold for LED-PLA@CS NPs) by protecting non-cancerous cells. Additionally, the nanoparticles demonstrated broad-spectrum antibacterial effects, suggesting efficacy in the prevention of chemotherapy-related infections. The dual-responsive LED-PLA@CS NPs allowed controlled tumor-targeted LED delivery with better selectivity and lower off-target toxicity, making LED-PLA@CS NPs interesting candidates for repurposing HCV treatments into safer cancer nanomedicines. Furthermore, this thorough analysis offers useful reference information for comprehending the interaction between drugs and DNA. Full article

Background: Furosemide is a loop diuretic used extensively to treat adult and pediatric patients. In some hospitals, furosemide oral liquids are not available in stock, thus necessitating the extemporaneous preparation of the drug. This study evaluates the stability of on-the-spot formulations of furosemide oral suspensions from crushed tablets evaluated in various vehicles: Dextrose 50%, Dextrose 70%, Ora-Sweet, and Ora-Plus over 60 days. This examination was prompted by the frequent shortage of certain excipients in the hospital, leading to the need to switch to Dextrose 50% or Dextrose 70% when Ora-Sweet and Ora-Plus are out of stock. Methods: The extemporaneous furosemide oral suspensions were prepared following the same compounding method used in the pharmacy. The suspensions were maintained at 4 °C in the refrigerator and assessed immediately and later, on days 7, 14, 30, and 60. The assessed parameters included visual appearance, redispersion time, sedimentation volume, and pH levels for stability analysis. We also examined the drug content, dissolution of the suspension, and microbiological stability. Results: Initial examinations indicated that Dextrose 50% and Ora-Plus maintained pH levels and stable appearances, while significant changes, mainly in appearance and redispersion time, indicated the instability of Dextrose 70%. Ora-Sweet showed fluctuations but stabilized by day 30. Dissolution studies demonstrated that Ora-Plus had dissolution characteristics superior to the other formulations, while Dextrose 50% showed declining dissolution percentages over time. Overall, the Ora-Plus vehicle showed superior stability (60 days), followed by Ora-Sweet (30 days), while Dextrose 70% and Dextrose 50% showed shorter stability durations of 14 and 7 days, respectively. The microbiological test results showed no microbial growth. Conclusions: This study demonstrates that the vehicle used in extemporaneous furosemide suspensions critically affects their stability and performance. Ora-Plus emerged as the most suitable vehicle, maintaining physical, chemical, and microbiological stability over 60 days, with consistent pH, redispersion, and dissolution behavior. Ora-Sweet showed intermediate stability (30 days), while Dextrose 50% and 70% exhibited early instability—7 and 14 days, respectively—marked by sedimentation, poor redispersibility, and declining drug release. These findings underscore the importance of vehicle selection and regular stability monitoring in compounded formulations to ensure therapeutic reliability and patient safety. Full article

Vitamin E is widely used in cosmetics and dermatological applications for its antioxidant, anti-inflammatory, and healing properties, yet its industrial use is limited by poor stability and bioavailability. To address these challenges, this study developed zein-based microstructures encapsulating vitamin E using electrohydrodynamic (EHD) techniques and evaluated how zein concentration affects morphology and release behavior. The SEM analysis showed that biopolymer (zein) concentration significantly affects microstructure morphology. At low concentrations (1%, 5%, and 15% (w/v)), micro/nanoparticles are formed, and high concentrations (30% (w/v)) yielded only fibers. The average size of the structures produced with zein (1–15% w/v) ranged from 0.38 to 0.90 µm, as measured using the program ImageJ (v1.54d). Structures containing vitamin E were generally smaller than those without. For electrospun fibers made with 30% zein, diameters ranged from 0.49 to 0.74 µm, with vitamin E-containing fibers also being thinner. Conductivity also influenced morphology; higher conductivity developed fibers, while lower conductivity formed particles. The solution with 15% (w/v) zein + 1% (w/w) vitamin E showed a conductivity of 1276 μS, similar to the 15% zein solution (1280 μS), indicating that vitamin E addition had no significant effect on conductivity. Release assays revealed that structures produced with low zein concentrations led to immediate release, while structured made with higher concentrations, prolonged release. A preliminary cosmetic formulation test has been conducted. The vitamin E microstructures were successfully incorporated into aloe vera hydrogel and coconut oil to show their potential for cosmetic applications. Full article

Background/Objectives: Pediatric drug administration is hindered by difficulties in swallowing conventional medications and the unpalatable taste of many drugs. Among diseases highlighting the need for improved pediatric delivery, tuberculosis (TB) stands out. One form of the disease is latent TB infection (LTBI), which is concerning in children. Effective LTBI treatment is crucial for prevention, with isoniazid (INH) widely used for its proven efficacy and safety. This study aims to develop innovative 3D-printed chewable gels containing INH for LTBI treatment. Methods: The gels were formulated using gelatin and carrageenan gum, sugar-free sweeteners, and flavoring. Two batches were prepared, and using 3D printing (3DP) with a semi-solid extrusion (SSE) module, chewable gels were produced. Rheological properties were measured to assess the feasibility of 3DP-SSE, evaluating the structural integrity and adequate fluidity of the formulation. The 3D-printed chewable gels were evaluated by visual, mass, and dimensional characteristics. In addition, the water activity, texture profile, INH and degradation product content, in vitro release, and taste-masking were investigated. Results: The optimized formulation maintained suitable rheological properties for 3DP-SSE, demonstrating consistent weight, dimensions, and stability after the process. The texture achieved a balance between printing parameters and shape maintenance, and the INH presented an immediate-release profile (>85% within 30 min). The chewable gels showed an improvement in palatability compared to conventional INH tablets. Conclusions: This innovative approach offers a promising solution for pediatric LTBI treatment, as it improves efficacy, medication acceptability, and on-demand access. Full article

Background: Tacrolimus (TAC) is the cornerstone of immunosuppression after liver transplantation (LT). TAC has a narrow therapeutic index and high inter- and intra-individual pharmacokinetic (PK) variability, requiring dose individualization. This variability is more noticeable in the early post-LT period. Objectives: This study aimed to compare the PK of different TAC formulations in the early post-LT period and describe the main PK characteristics and plasma levels obtained with each TAC formulation used. Methods: The search was conducted in MEDLINE (PubMed) and EMBASE in accordance with PRISMA-ScR guidelines. The main inclusion criteria were clinical trials and observational studies focusing on the PK parameters of TAC in LT recipients during the first month post-transplant. Results: A total of 2169 articles were identified, of which 23 met the inclusion criteria. Various PK parameters were analyzed after LT for the different TAC formulations: intravenous (iv) and oral forms, such as immediate-release (IRT), prolonged-release (PRT), and extended-release (LCPT) formulations. PK variability was higher in the initial days after LT, with different TAC exposure between formulations. IV TAC allows the rapid attainment of therapeutic levels, but it has fallen into disuse. Regarding oral formulations, IRT reaches target levels faster than PRT and LCPT. PRT and LCPT exposure seem more stable during the first month post-LT than when using IRT. Conclusions: TAC formulations exhibit relevant differences in their PK profile in the early post-LT period. PK differences might influence the dose regimen and the time to achieve PK targets. Given these variations, therapeutic drug monitoring (TDM) is essential for optimizing treatment. Full article

The main aim of this study was to develop a diclofenac-loaded, orodispersible formulation prepared by double-needle electrospinning. For the use of two needles, one above the other, a new needle holder was designed and 3D printed. During the optimization of the drug-free PVP carrier, the effect of the polymer concentration on the morphology and average fiber diameter was investigated. Electrospinning was possible for solutions with a PVP concentration between 7.5 and 15 w/w%. Too low viscosity led to smooth-surfaced nanoparticles, since electrospraying occurred. The optimal material properties and process parameters were used to prepare drug-loaded nanofibers. The morphology, crystallinity, chemical interactions, encapsulation efficiency, drug distribution, in vitro disintegration, in vitro dissolution, cytocompatibility, and 6-month stability were tested. According to the results, the electrospun formulation was an amorphous solid dispersion with excellent encapsulation efficiency. The drug distribution was homogeneous within the nanofiber matrix. The disintegration was completed in about 5 s in artificial saliva and about 41 s on an artificial tongue. The dissolution in artificial saliva was complete within 10 min. Overall, a promising formulation was developed with rapid disintegration, immediate drug release, and good stability. Additionally, a new in vitro dissolution method (“AS-to-FaSSGF”) was developed to obtain a bigger picture of drug dissolution throughout the gastrointestinal tract. Full article

Background/Objectives: This study aimed to evaluate the degradation of omeprazole suspension under various pH conditions and to propose recommendations for preparing compounded suspensions. Given the clinical need for alternative dosage forms for pediatric and geriatric patients and those with dysphagia, the research focused on assessing whether modifications in formulation composition—specifically the inclusion of sodium bicarbonate—could improve omeprazole stability, thus enhancing its bioavailability. Methods: Three formulations were prepared: O1, based on crushed enteric-coated pellets from a commercial product; O2, with crushed pellets suspended in an 8% sodium bicarbonate solution with glycerin; and O3, with pure omeprazole suspended in an 8% sodium bicarbonate solution with glycerin. Release studies were conducted using basket or paddle apparatus under conditions simulating fasted (pH 1.2 and 6.8) and fed (pH 6, 4.5, and 3) gastric and intestinal juices at 37 °C over 120 min. At predetermined intervals, samples were withdrawn and analyzed by a validated HPLC method with UV detection to quantify the released omeprazole. Results: The commercial enteric-coated product showed no release at a low pH, confirming its protective coating. In contrast, formulation exhibited significant degradation in acidic environments. The O2 formulation, benefiting from the buffering effect of sodium bicarbonate, showed improved stability compared to O1. Notably, formulation O3 yielded the highest drug recovery, with approximately 74% released at pH 6 and 65% at pH 6.8, demonstrating significantly better performance, as confirmed by statistical analysis (p < 0.05). Conclusions: The composition of omeprazole suspensions substantially influences the drug stability and release profiles. The O3 formulation, based on pure omeprazole with sodium bicarbonate, is recommended for immediate-release suspensions to enhance bioavailability. Further studies are needed to optimize conditions for pediatric use. Full article

Background/Objectives: Fixed-dose combinations (FDCs) offer significant advantages for patients and healthcare systems by improving adherence and reducing pill burden. However, developing multi-drug formulations remains challenging due to complexities in drug compatibility, stability, and dissolution behavior. The COVID-19 pandemic has necessitated innovative therapeutic approaches. This study aims to develop and evaluate an FDC containing FR (an antiviral drug) and RT (a PDE4 inhibitor) for potential COVID-19 treatment. Methods: The proposed dual-layer FDC was formulated to achieve immediate release of RT using Klucel EXF and controlled release of FR using a combination of Klucel HXF and Compritol ATO888. Critical quality attributes, including drug–excipient compatibility, solid-state properties, tablet uniformity, and dissolution kinetics, were assessed. RT and FR quantification methods were developed and validated per international guidelines. Compatibility studies were conducted by combining excipients in fixed ratios with APIs, followed by stability testing. Results: No degradation or adverse interactions were observed between APIs and excipients. RT exhibited rapid dissolution within 30 min, while FR release was effectively controlled through a gel-forming matrix and lipid barrier. Bulk powder and tablet physical parameters met pharmacopeial standards, and content uniformity between layers was maintained. The formulation demonstrated a stable dissolution profile for both drugs, ensuring consistent drug release. Conclusions: The novel FDC of RT and FR exhibits favorable physicochemical properties, a stable dissolution profile, and potential for improved treatment efficacy in COVID-19 patients. By optimizing drug release mechanisms and ensuring formulation stability, this FDC could serve as a pharmaco-economically viable alternative to existing therapies, enhancing patient compliance and treatment outcomes. Full article

The aim of this study was to investigate the influence of solid dispersion (SD) formulation factors on improvement of the bioavailability and pharmacokinetic profile of clopidogrel after peroral administration using an in vitro–in silico approach. A clopidogrel-specific, physiologically based biopharmaceutical model (PBBM) was developed and validated to predict absorption and distribution of clopidogrel after peroral administration of the tested formulations. Clopidogrel solid dispersions were prepared using two polymers (poloxamer 407 and copovidone) and a drug-to-polymer ratio of 1:5 and 1:9. The results of the in vitro dissolution test under pH–media change conditions showed that the type and ratio of polymers notably influenced the release of clopidogrel from the SDs. It can be observed that an increase in the polymer content in the SDs leads to a decrease in the release of clopidogrel from the SDs. The predictive power of the constructed clopidogrel-specific PBBM was demonstrated by comparing the simulation results with pharmacokinetic data from the literature. The in vitro dissolution data were used as inputs for the PBBM to predict the pharmacokinetic profiles of clopidogrel after the peroral administration of SDs. SDs with copovidone (1:5) and poloxamer (1:9) showed the potential to achieve the highest drug absorption and bioavailability, with an improvement of over 100% compared to an immediate-release (IR) tablet. The sample with poloxamer (1:9) may have the potential to reduce inter-individual variability in clopidogrel pharmacokinetics due to absorption in the cecum and colon and associated lower first-pass metabolism in the liver. This suggests that distal intestine may be the targeted delivery site for clopidogrel, leading to improved absorption and bioavailability of the drug. This study has shown that an in vitro–in silico approach could be a useful tool for the development and optimization of clopidogrel formulations, helping in decision making regarding the composition of the formulation to achieve the desired pharmacokinetic profile. Full article

Objectives: This study explores the development and evaluation of a bilayer sustained-release (SR) tablet formulation of ruxolitinib. As a BCS Class 1 drug, ruxolitinib requires twice-daily dosing due to its short half-life. We designed a bilayer tablet that integrates immediate-release (IR) and SR components in varying ratios to achieve sustained plasma concentrations, which we evaluated using discriminative analysis. Methods: Bilayer tablets combining IR and SR components were prepared in different ratios. In vitro dissolution tests and pharmacokinetic studies were conducted using Beagle dogs, followed by the evaluation of in vivo–in vitro correlation (IVIVC), along with a discriminative pharmacokinetic analysis focused on the SR layer. Results: A discriminative pharmacokinetic and IVIVC analysis was applied to all bilayer tablets, offering clearer insights into the plasma concentration and dissolution profiles. Pharmacokinetic studies showed that test formulation F4, which has a 20:20 IR-to-SR ratio, is expected to provide a similar area under the curve (AUC) while prolonging exposure compared to the reference IR tablet. Conclusions: This study highlights the potential of a bilayer tablet approach, combined with discriminative pharmacokinetic and IVIVC analysis, for creating a sustained-release dosage form of ruxolitinib. Full article

Background: Captopril (CAP), an angiotensin-converting enzyme inhibitor (ACEI), is widely prescribed for managing hypertension, heart failure, and related conditions. When administered orally, CAP undergoes hepatic metabolism, resulting in a bioavailability of 60–75%. However, to bypass the first-pass metabolism and other limitations of the oral route, mucoadhesive buccal films have gained attention as a promising alternative with several advantages. The aim of this work was the formulation and optimization of chitosan-ascorbate mucoadhesive films for buccal delivery of CAP for the management of a hypertension crisis (10 mg and 20 mg) by employing quality by design (QbD) principles and the design of experiment (DoE) approach. Materials and methods: In the present work, chitosan (CHI) was selected as a film-forming agent due to its permeability-enhancing properties, which could be further improved through salification with ascorbic acid (AA). The polymer films were prepared by the solvent casting method. Results: The optimized CAP-loaded formula showed appropriate in vitro mucoadhesion force (>15 N) and breaking hardness (>14 N). The different CAP-containing films had a high drug content (>95%) with homogeneous drug distribution, thus complying with the requirements of Pharmacopeia. FT-IR and RAMAN spectroscopy analyses demonstrated successful incorporation of the drug, and interaction was observed between the excipients of the films, especially in the form of hydrogen bonds. The dissolution test showed immediate release of the API with a similar release pattern from both concentrations of CAP-loaded films. Conclusions: The properties of the prepared films met the predetermined critical quality attribute requirements. The optimized formula of CHI 1.4%, AA 2.5%, and glycerol 0.3% appears to be a promising buccal drug delivery system for CAP. Full article