Search Results (9)

Support vector machines are shown to be highly effective in mapping burn extent from hyperspatial imagery in grasslands. Unfortunately, this pixel-based method is hampered in forested environments that have experienced low-intensity fires because unburned tree crowns obstruct the view of the surface vegetation. This obstruction causes surface fires to be misclassified as unburned. To account for misclassifying areas under tree crowns, trees surrounded by surface burn can be assumed to have been burned underneath. This effort used a mask region-based convolutional neural network (MR-CNN) and support vector machine (SVM) to determine trees and burned pixels in a post-fire forest. The output classifications of the MR-CNN and SVM were used to identify tree crowns in the image surrounded by burned surface vegetation pixels. These classifications were also used to label the pixels under the tree as being within the fire’s extent. This approach results in higher burn extent mapping accuracy by eliminating burn extent false negatives from surface burns obscured by unburned tree crowns, achieving a nine percentage point increase in burn extent mapping accuracy. Full article

The use of imagery from small unmanned aircraft systems (sUAS) has enabled the production of more accurate data about the effects of wildland fire, enabling land managers to make more informed decisions. The ability to detect trees in hyperspatial imagery enables the calculation of canopy cover. A comparison of hyperspatial post-fire canopy cover and pre-fire canopy cover from sources such as the LANDFIRE project enables the calculation of tree mortality, which is a major indicator of burn severity. A mask region-based convolutional neural network was trained to classify trees as groups of pixels from a hyperspatial orthomosaic acquired with a small unmanned aircraft system. The tree classification is summarized at 30 m, resulting in a canopy cover raster. A post-fire canopy cover is then compared to LANDFIRE canopy cover preceding the fire, calculating how much the canopy was reduced due to the fire. Canopy reduction allows the mapping of burn severity while also identifying where surface, passive crown, and active crown fire occurred within the burn perimeter. Canopy cover mapped through this effort was lower than the LANDFIRE Canopy Cover product, which literature indicated is typically over reported. Assessment of canopy reduction mapping on a wildland fire reflects observations made both from ground truthing efforts as well as observations made of the associated hyperspatial sUAS orthomosaic. Full article

Wildfires burn 4–10 million acres annually across the United States and wildland fire related damages and suppression costs have exceeded $13 billion for a single year. High-intensity wildfires contribute to post-fire erosion, degraded wildlife habitat, and loss of timber resources. Accurate and temporally adequate assessment of the effects of wildland fire on the environment is critical to improving the of wildland fire as a tool for restoring ecosystem resilience. Sensor miniaturization and small unmanned aircraft systems (sUAS) provide affordable, on-demand monitoring of wildland fire effects at a much finer spatial resolution than is possible with satellite imagery. The use of sUAS would allow researchers to obtain data with more detail at a much lower initial cost. Unfortunately, current regulatory and technical constraints prohibit the acquisition of imagery using sUAS for the entire extent of large fires. This research examined the use of sUAS imagery to train and validate burn severity and extent mapping of large wildland fires from various satellite images. Despite the lower resolution of the satellite image, the research utilized the advantages of satellite imagery such as global coverage, low cost, temporal stability, and spectral extent while leveraging the higher resolution of hyperspatial sUAS imagery for training and validating the mapping analytics. Full article

The deep convolutional neural network (DCNN) has recently been applied to the highly challenging and ill-posed problem of single image super-resolution (SISR), which aims to predict high-resolution (HR) images from their corresponding low-resolution (LR) images. In many remote sensing (RS) applications, spatial resolution of the aerial or satellite imagery has a great impact on the accuracy and reliability of information extracted from the images. In this study, the potential of a DCNN-based SISR model, called enhanced super-resolution generative adversarial network (ESRGAN), to predict the spatial information degraded or lost in a hyper-spatial resolution unmanned aircraft system (UAS) RGB image set is investigated. ESRGAN model is trained over a limited number of original HR (50 out of 450 total images) and virtually-generated LR UAS images by downsampling the original HR images using a bicubic kernel with a factor $\times 4$ . Quantitative and qualitative assessments of super-resolved images using standard image quality measures (IQMs) confirm that the DCNN-based SISR approach can be successfully applied on LR UAS imagery for spatial resolution enhancement. The performance of DCNN-based SISR approach for the UAS image set closely approximates performances reported on standard SISR image sets with mean peak signal-to-noise ratio (PSNR) and structural similarity (SSIM) index values of around 28 dB and 0.85 dB, respectively. Furthermore, by exploiting the rigorous Structure-from-Motion (SfM) photogrammetry procedure, an accurate task-based IQM for evaluating the quality of the super-resolved images is carried out. Results verify that the interior and exterior imaging geometry, which are extremely important for extracting highly accurate spatial information from UAS imagery in photogrammetric applications, can be accurately retrieved from a super-resolved image set. The number of corresponding keypoints and dense points generated from the SfM photogrammetry process are about 6 and 17 times more than those extracted from the corresponding LR image set, respectively. Full article

Deep learning has already been proved as a powerful state-of-the-art technique for many image understanding tasks in computer vision and other applications including remote sensing (RS) image analysis. Unmanned aircraft systems (UASs) offer a viable and economical alternative to a conventional sensor and platform for acquiring high spatial and high temporal resolution data with high operational flexibility. Coastal wetlands are among some of the most challenging and complex ecosystems for land cover prediction and mapping tasks because land cover targets often show high intra-class and low inter-class variances. In recent years, several deep convolutional neural network (CNN) architectures have been proposed for pixel-wise image labeling, commonly called semantic image segmentation. In this paper, some of the more recent deep CNN architectures proposed for semantic image segmentation are reviewed, and each model’s training efficiency and classification performance are evaluated by training it on a limited labeled image set. Training samples are provided using the hyper-spatial resolution UAS imagery over a wetland area and the required ground truth images are prepared by manual image labeling. Experimental results demonstrate that deep CNNs have a great potential for accurate land cover prediction task using UAS hyper-spatial resolution images. Some simple deep learning architectures perform comparable or even better than complex and very deep architectures with remarkably fewer training epochs. This performance is especially valuable when limited training samples are available, which is a common case in most RS applications. Full article

Shoreline information is fundamental for understanding coastal dynamics and for implementing environmental policy. The analysis of shoreline variability usually uses a group of shoreline indicators visibly discernible in coastal imagery, such as the seaward vegetation line, wet beach/dry beach line, and instantaneous water line. These indicators partition a beach into four zones: vegetated land, dry sand or debris, wet sand, and water. Unmanned aircraft system (UAS) remote sensing that can acquire imagery with sub-decimeter pixel size provides opportunities to map these four beach zones. This paper attempts to delineate four beach zones based on UAS hyperspatial RGB (Red, Green, and Blue) imagery, namely imagery of sub-decimeter pixel size, and feature textures. Besides the RGB images, this paper also uses USGS (the United States Geological Survey) Munsell HSV (Hue, Saturation, and Value) and CIELUV (the CIE 1976 (L*, u*, v*) color space) images transformed from an RGB image. The four beach zones are identified based on the Gray Level Co-Occurrence Matrix (GLCM) and Local Binary Pattern (LBP) textures. Experiments were conducted with South Padre Island photos acquired by a Nikon D80 camera mounted on the US-16 UAS during March 2014. The results show that USGS Munsell hue can separate land and water reliably. GLCM and LBP textures can slightly improve classification accuracies by both unsupervised and supervised classification techniques. The experiments also indicate that we could reach acceptable results on different photos while using training data from another photo for site-specific UAS remote sensing. The findings imply that parallel processing of classification is feasible. Full article

The main goal of this exploratory project was to quantify seedling density in post fire regeneration sites, with the following objectives: to evaluate the application of second order image texture (SOIT) in image segmentation, and to apply the object-based image analysis (OBIA) approach to develop a hierarchical classification. With the utilization of image texture we successfully developed a methodology to classify hyperspatial (high-spatial) imagery to fine detail level of tree crowns, shadows and understory, while still allowing discrimination between density classes and mature forest versus burn classes. At the most detailed hierarchical Level I classification accuracies reached 78.8%, a Level II stand density classification produced accuracies of 89.1% and the same accuracy was achieved by the coarse general classification at Level III. Our interpretation of these results suggests hyperspatial imagery can be applied to post-fire forest density and regeneration mapping. Full article

We assessed the potential of multi-spectral GeoEye imagery for biodiversity assessment in an urban context in Bangalore, India. Twenty one grids of 150 by 150 m were randomly located in the city center and all tree species within these grids mapped in the field. The six most common species, collectively representing 43% of the total trees sampled, were selected for mapping using pixel-based and object-based approaches. All pairs of species were separable based on spectral reflectance values in at least one band, with Peltophorum pterocarpum being most distinct from other species. Object-based approaches were consistently superior to pixel-based methods, which were particularly low in accuracy for tree species with small canopy sizes, such as Cocos nucifera and Roystonea regia. There was a strong and significant correlation between the number of trees determined on the ground and from object-based classification. Overall, object-based approaches appear capable of discriminating the six most common species in a challenging urban environment, with substantial heterogeneity of tree canopy sizes. Full article

Urban forest ecosystems provide a range of social and ecological services, but due to the heterogeneity of these canopies their spatial extent is difficult to quantify and monitor. Traditional per-pixel classification methods have been used to map urban canopies, however, such techniques are not generally appropriate for assessing these highly variable landscapes. Landsat imagery has historically been used for per-pixel driven land use/land cover (LULC) classifications, but the spatial resolution limits our ability to map small urban features. In such cases, hyperspatial resolution imagery such as aerial or satellite imagery with a resolution of 1 meter or below is preferred. Object-based image analysis (OBIA) allows for use of additional variables such as texture, shape, context, and other cognitive information provided by the image analyst to segment and classify image features, and thus, improve classifications. As part of this research we created LULC classifications for a pilot study area in Seattle, WA, USA, using OBIA techniques and freely available public aerial photography. We analyzed the differences in accuracies which can be achieved with OBIA using multispectral and true-color imagery. We also compared our results to a satellite based OBIA LULC and discussed the implications of per-pixel driven vs. OBIA-driven field sampling campaigns. We demonstrated that the OBIA approach can generate good and repeatable LULC classifications suitable for tree cover assessment in urban areas. Another important finding is that spectral content appeared to be more important than spatial detail of hyperspatial data when it comes to an OBIA-driven LULC. Full article