Search Results (4)

Nickel-based metal–organic frameworks (Ni-MOFs) have received enormous amounts of attention from the scientific community due to their excellent porosity, larger specific surface area, tunable structure, and intrinsic redox properties. In previous years, Ni-MOFs and their hybrid composite materials have been extensively explored for electrochemical sensing applications. As per the reported literature, Ni-MOF-based hybrid materials have been used in the fabrication of electrochemical sensors for the monitoring of ascorbic acid, glucose, L-tryptophan, bisphenol A, carbendazim, catechol, hydroquinone, 4-chlorophenol, uric acid, kaempferol, adenine, _L-cysteine, etc. The presence of synergistic effects in Ni-MOF-based hybrid materials plays a crucial role in the development of highly selective electrochemical sensors. Thus, Ni-MOF-based materials exhibited enhanced sensitivity and selectivity with reasonable real sample recovery, which suggested their potential for practical applications. In addition, Ni-MOF-based hybrid composites were also adopted as electrode modifiers for the development of supercapacitors. The Ni-MOF-based materials demonstrated excellent specific capacitance at low current densities with reasonable cyclic stability. This review article provides an overview of recent advancements in the utilization of Ni-MOF-based electrode modifiers with metal oxides, carbon-based materials, MXenes, polymers, and LDH, etc., for the electrochemical detection of environmental pollutants and biomolecules and for supercapacitor applications. In addition, Ni-based bimetallic and trimetallic catalysts and their composites have been reviewed for electrochemical sensing and supercapacitor applications. The key challenges, limitations, and future perspectives of Ni-MOF-based materials are discussed. We believe that the present review article may be beneficial for the scientific community working on the development of Ni-MOF-based materials for electrochemical sensing and supercapacitor applications. Full article

This study discloses the noncovalent immobilization of a bienzyme cascade composed of glucose oxidase (GOx) and horseradish peroxidase (HRP) onto magnetically responsive polyamide microparticles (PA MPs). Porous PA6, PA4, and PA12 MPs containing iron fillers were synthesized via activated anionic ring-opening polymerization in suspension, alongside neat PA6 MPs used as a reference. Four hybrid catalytic systems (GOx/HRP@PA) were prepared through sequential adsorption of HRP and GOx onto the various PA MP supports. The initial morphologies of the supports and the hybrid biocatalysts were characterized by SEM, followed by evaluation of the catalytic performance using a two-step glucose oxidation cascade process. Among all systems, the GOx/HRP@PA4-Fe complex exhibited the highest activity, being approximately 1.5 times greater than the native enzyme dyad, followed by the PA6-supported system with slightly inferior performance. All systems obeyed Michaelis–Menten kinetics, with the immobilized cascades displaying higher Kₘ and Vₘₐₓ values than the non-immobilized enzyme pair while maintaining comparable catalytic efficiencies, CE (CE = k_cat/Kₘ). Subsequently, the immobilized and native enzyme systems were employed for the polymerization of aniline. According to UV–VIS, complete monomer conversion was achieved within 24 h for selected catalysts, and FTIR analysis confirmed the formation of polyaniline in the emeraldine base form without the use of template molecules. These findings highlight the potential of Fe-containing polyamide microparticles as efficient supports for the sustainable, enzyme-mediated synthesis of intrinsically conductive aromatic polymers. Full article

The production of ethylene glycol (EG) from cellulose has garnered significant attention in recent years as an attractive alternative to fossil fuels due to the potential of cellulose as a renewable and sustainable feedstock. In this work, to the best of our knowledge, a series of low-cost Ni-W bimetallic catalysts supported on glucose/carbon nanotube hybrid carbons were synthesised for the first time and employed to transform cellulose into EG. Two different strategies were combined for the preparation of the carbons: the activation and addition of carbon nanotubes (CNTs) to obtain a hybrid material (AG-CNT). The catalytic conversion process proceeded through cellulose hydrolysis to glucose, followed by glucose retro-aldol condensation to glycolaldehyde and its subsequent hydrogenation to EG. Through the optimisation of the catalyst’s properties, particularly the metals’ content, a good synergistic effect of C-C bond cleavage and hydrogenation capabilities was assured, resulting in the highly selective production of EG. The balance between Ni and W active sites was confirmed to be a crucial parameter. Thus, total cellulose conversion (100%) was achieved with EG yields of 60–62%, which are amongst the best yields ever reported for the catalytic conversion of cellulose into EG via carbon-supported catalysts. Full article

Notably available from the cellulose contained in lignocellulosic biomass, glucose is a highly attractive substrate for eco-efficient processes towards high-value chemicals. A recent strategy for biomass valorization consists on combining biocatalysis and chemocatalysis to realise the so-called chemo-enzymatic or hybrid catalysis. Optimisation of the glucose conversion to 5-hydroxymethylfurfural (HMF) is the object of many research efforts. HMF can be produced by chemo-catalyzed fructose dehydration, while fructose can be selectively obtained from enzymatic glucose isomerization. Despite recent advances in HMF production, a fully integrated efficient process remains to be demonstrated. Our innovative approach consists on a continuous process involving enzymatic glucose isomerization, selective arylboronic-acid mediated fructose complexation/transportation, and chemical fructose dehydration to HMF. We designed a novel reactor based on two aqueous phases dynamically connected via an organic liquid membrane, which enabled substantial enhancement of glucose conversion (70%) while avoiding intermediate separation steps. Furthermore, in the as-combined steps, the use of an immobilized glucose isomerase and an acidic resin facilitates catalyst recycling. Full article