Search Results (14)

To address the suboptimal leveling performance and insufficient slope stability of existing agricultural machinery chassis in hilly and mountainous regions, this study proposes an innovative omnidirectional leveling system based on a “double-layer frame” crawler-type agricultural chassis. The system employs servo-electric cylinders as its actuation components. A control model for the servo-electric cylinders has been established, accompanied by the design of an adaptive sliding mode controller (ASMC). A co-simulation platform was developed utilizing Matlab/Simulink and Adams to evaluate system performance. Comparative simulations were conducted between the ASMC and a conventional PID controller, followed by comprehensive machine testing. Experimental results demonstrate that the proposed double-layer frame crawler chassis achieves longitudinal leveling adjustments of up to 25° and lateral adjustments of 20°. Through structural optimization and the application of ASMC (in contrast to PID), both longitudinal and lateral leveling response times were reduced by 1.12 s and 0.95 s, respectively. Furthermore, leveling velocities increased by a factor of 1.5 in the longitudinal direction and by a factor of 1.3 in the lateral direction, while longitudinal and lateral angular accelerations decreased by 15.8% and 17.1%, respectively. Field tests confirm the system’s capability for adaptive leveling on inclined terrain, thereby validating the enhanced performance of the proposed omnidirectional leveling system. Full article

Quasi-direct current (Q-DC) filamentary electrical discharges are used to control the shock train in a back-pressured Mach 2 duct flow. The coupled interaction between the plasma filaments and the shock train leading edge (STLE) is studied for a variety of boundary conditions. Electrical parameters associated with the discharge are recorded during actuation, demonstrating a close correlation between the STLE position and dynamics. High-speed self-aligned focusing schlieren (SAFS) and high frame-rate color camera imaging are the primary optical diagnostics used to study the flowfield and plasma morphology. Shock tracking and plasma characterization algorithms are employed to extract time-resolved quantitative data during shock–plasma interactions. Four distinct shock–plasma interaction types are identified and outlined, revealing a strong dependence on the spacing between the uncontrolled STLE and discharge electrodes and a moderate dependence on flow parameters. Full article

The paper proposes a novel automatic control system for the attitude of the mini-satellites equipped with an actuator having N = 2 DGMSCMGs (Double Gimbal Magnetically Suspended Control Moment Gyros) in parallel and orthogonal configuration, as well as a DGMSCMG-type sensor for the measurement of the satellite absolute angular rate. The proportional-derivative controller, designed based on the Lyapunov-functions theory, elaborates the control law according to which the angular rates applied to the servo systems for the actuation of the DGMSCMGs gyroscopic gimbals are computed. The gimbal’s angular rates create gyroscopic couples acting on the satellite in order to control its attitude with respect to the local orbital frame. The new proposed control architecture was software implemented and validated, and the analysis of the obtained results proved the cancellation of the convergence errors and excellent angular rate precision. Full article

This paper experimentally investigates the performance of piezoelectric force actuators. Using the same encapsulated piezoelectric stack, an inertial-type actuator and a frame-type actuator are constructed for performance comparison. The experimental results are also used to validate the recently established actuator models, whilst the mechanical and piezoelectrical parameters of the models are experimentally identified. The performance of the actuators is described by the transmitted force(s) and input power flow from the actuators to the base structure with reference to the same electrical input voltage to the stack. The validation is deemed successful due to the strong agreement observed between the measured and predicted actuator performances. Additionally, it is discovered that the frame-type actuator has the capacity to produce significantly higher transmitted forces and input power flow to the base structure compared to the inertial-type actuator. The mechanism underlying the performance disparity between these two types of actuators is also examined. This paper clarifies the mechanism, shedding light on the design and optimization of piezoelectric actuators. Full article

The precise estimation of fluid motion is critical across various fields, including aerodynamics, hydrodynamics, and industrial fluid mechanics. However, refraction at complex interfaces in the light path can cause image deterioration and lead to severe measurement errors if the aberration changes with time, e.g., at fluctuating air–water interfaces. This challenge is particularly pronounced in technical energy conversion processes such as bubble formation in electrolysis, droplet formation in fuel cells, or film flows. In this paper, a flow field estimation algorithm that can perform the aberration correction function is proposed, which integrates the flow field distribution estimation algorithm based on the Particle Image Velocimetry (PIV) technique and the novel actuator-free adaptive optics technique. Two different multi-input convolutional neural network (CNN) structures are established, with two frames of distorted PIV images and measured wavefront distortion information as inputs. The corrected flow field results are directly output, which are divided into two types based on different network structures: dense estimation and sparse estimation. Based on a series of models, a corresponding dataset synthesis model is established to generate training datasets. Finally, the algorithm performance is evaluated from different perspectives. Compared with traditional algorithms, the two proposed algorithms achieves reductions in the root mean square value of velocity residual error by 84% and 89%, respectively. By integrating both flow field measurement and novel adaptive optics technique into deep CNNs, this method lays a foundation for future research aimed at exploring more intricate distortion phenomena in flow field measurement. Full article

The lunar lava tubes are envisioned as possible hosting structures for a human base in the Moon’s equatorial regions, providing shelter from radiations, micrometeoroids, and temperature excursion. A first robotic mission is set to scout the habitability of these underground architectures in the near future. The communication inside these underground tunnels is heavily constrained; hence, the scouting system should rely on a high degree of autonomy. At the same time, the exploration system may encounter different types of terrain, requiring an adaptable mobility subsystem able to travel fast on basaltic terrain while avoiding considerable obstacles. This paper presents a cave explorer’s mission study and preliminary sizing targeting the lunar lava tubes. The study proposes using a hybrid mobility system with wheels and thrusters to navigate smoothly inside the lava tubes. The peculiar mobility system of the cave explorer requires an accurate study of the adaptability of its control capabilities with the change of mass for a given set of sensors and actuators. The combination of conceptual design techniques and control assessment gives the engineer a clear indication of the feasible design box for the studied system during the initial formulation phases of a mission. This first part of the study focuses on framing the stakeholders’ needs and identifying the required capabilities of the cave explorer. Furthermore, the study focuses on assessing a design box in terms of mass and power consumption for the cave explorer. Following different mission-level assessments, a more detailed design of the cave explorer is discussed, providing an initial design in terms of mass and power consumption. Finally, the objective shifts toward studying the performances of the guidance, navigation, and control (GNC) algorithms varying the mass of the cave explorer. The GNC significantly impacts the design box of the surface planetary system. Hence, investigating its limitations can indicate the feasibility of mass growth to accommodate, for example, more payload. Full article

Microfluidics, as one of the most valuable analytical technologies of this century, has played an important role in various fields. Particularly, out-of-channel microfluidics, often referred to as open microfluidics (OMF) has recently drawn wide research attention among scholars for its great potential in convenient manual intervention. Much recent research has been geared toward bare droplets and particle-armed droplets (namely liquid marbles, LMs), which could serve as independent systems in OMF. Their versatile applications include but are not limited to nanomaterials preparation, energy harvesting, cell culture and environment monitoring. These applications are mainly attributed to the excellent independence, low reagent consumption and short reaction time of separate droplets and LMs. In addition, more operation features, such as diverse handling options, flexible controllability and high precision, further enable droplets and LMs carrying small liquid biochemical samples to be manipulated in an open environment freely. Considering the emergence of important research on bare droplets and LMs, this paper systematically reviews the state of the art in the fundamentals and manipulation of the two novel platforms under the frame of OMF. First, the intrinsic property of bare droplets on solid substrates, especially on superhydrophobic ones, is discussed, followed by the formation mechanism of nonwetting LMs and the effect of coating particles on LMs’ performance. Then, friction obstacles and actuation principles raised in driving droplets and LMs are further analyzed theoretically. Subsequently, several classical types of manipulation tasks for both droplets and LMs, namely transportation, coalescence, mixing and splitting, are discussed with a focus on key techniques to accomplish the tasks aforementioned. Finally, the fundamental and manipulation similarities and differences between bare droplets and LMs are summarized and future developments towards droplet- or LM-based microreactors and microsensors are recommended accordingly. Full article

Structural vibrations have adverse effects and can lead to catastrophic failures. Among various methods for mitigation of vibrations, the semi-active control approaches have the advantage of not requiring a large external power supply. In this paper, we propose and test a sliding mode control method for the semi-active mitigation of vibrations in frame structures. The control forces are generated in a purely dissipative manner by means of on/off type actuators that take the form of controllable structural nodes. These nodes are essentially lockable hinges, modeled as viscous dampers, which are capable of the on/off control of the transmission of bending moments between the adjacent beams. The control aim is formulated in terms of the displacement of a selected degree of freedom. A numerically effective model of such a node is developed, and the proposed control method is verified in a numerical experiment of a four-story shear structure subjected to repeated random seismic excitations. In terms of the root-mean-square displacement, the control reduced the response by 48.4–78.4% on average, depending on the number and placement of the applied actuators. The peak mean amplitude at the first mode of natural vibrations was reduced by as much as 70.6–96.5%. Such efficiency levels confirm that the proposed control method can effectively mitigate vibrations in frame structures. Full article

Flow control of liquid metals based on the actual flow condition is important in many metallurgical applications. For instance, the liquid steel flow in the mould of a continuous caster strongly influences the product quality. The flow can be modified by an electromagnetic brake (EMBr). However, due to the lack of appropriate flow measurement techniques, the control of those actuators is usually not based on the actual flow condition. This article describes the recent developments of the Contactless Inductive Flow Tomography (CIFT) towards a real-time monitoring system, which can be used as an input to the control loop for an EMBr. CIFT relies on measuring the flow-induced perturbation of an applied magnetic field and the solution of an underlying linear inverse problem. In order to implement the CIFT reconstructions in combination with EMBr, two issues have to be solved: (i) compensation of the effects of the change in EMBr strength on the CIFT measurement system and (ii) a real-time solution of the inverse problem. We present solutions of both problems for a model of a continuous caster with a ruler-type EMBr. The EMBr introduces offsets of the measured magnetic field that are several orders of magnitude larger than the very flow-induced perturbations. The offset stems from the ferromagnetic hysteresis exhibited by the ferrous parts of the EMBr in the proximity of the measurement coils. Compensation of the offset was successfully achieved by implementing a numerical model of hysteresis to predict the offset. Real-time reconstruction was achieved by precalculating the computationally heavy matrix inverses for a predefined set of regularization parameters and choosing the optimal one in every measurement frame. Finally, we show that this approach does not hinder the reconstruction quality. Full article

Legged robots are meant to autonomously navigate unstructured environments for applications like search and rescue, inspection, or maintenance. In autonomous navigation, a close relationship between locomotion and perception is crucial; the robot has to perceive the environment and detect any change in order to autonomously make decisions based on what it perceived. One main challenge in autonomous navigation for legged robots is locomotion over unstructured terrains. In particular, when the ground is slippery, common control techniques and state estimation algorithms may not be effective, because the ground is commonly assumed to be non-slippery. This paper addresses the problem of slip detection, a first fundamental step to implement appropriate control strategies and perform dynamic whole-body locomotion. We propose a slip detection approach, which is independent of the gait type and the estimation of the position and velocity of the robot in an inertial frame, that is usually prone to drift problems. To the best of our knowledge, this is the first approach of a quadruped robot slip detector that can detect more than one foot slippage at the same time, relying on the estimation of measurements expressed in a non-inertial frame. We validate the approach on the 90 kg Hydraulically actuated Quadruped robot (HyQ) from the Istituto Italiano di Tecnologia (IIT), and we compare it against a state-of-the-art slip detection algorithm. Full article

This paper presents the design and fabrication of a profiling float primarily used for thermocline observations and tracking, with an emphasis on depth control performance. The proposed float consists of a frame-type electronic chamber and a variable buoyancy system (VBS) actuator chamber. Components or sensors can be added or removed according to specific requirements. All components were off the shelf, which lowered the cost of the float. In addition, a segment PD control method is introduced. Simulink results showed that there was no need to change any parameter when carrying out tasks at different depths. This method is superior to the traditional PD control and sliding mode control (SMC). In the process of diving, the speed could be well controlled to less than 0.2 m/s. We completed depth determination and control method validation in Qiandao Lake. The final results were consistent with the simulation results, and the maximum depth retention error was less than 0.3 m. Field tests also demonstrated that the prototype float can be used for thermocline observations in the upper layer of seawater or lake water. Full article

Translational parallel manipulators (TPMs) with DELTA-like architectures are the most known and affirmed ones, even though many other TPM architectures have been proposed and studied in the literature. In a recent patent application, this author has presented a TPM with three equal limbs of Universal-Revolute-Universal (URU) type, with only one actuated joint per limb, which has overall size and characteristics similar to DELTA robots. The presented translational 3-URU architecture is different from other 3-URUs, proposed in the literature, since it has the actuators on the frame (base) even though the actuated joints are not on the base, and it features a particular geometry. Choosing the geometry and the actuated joints highly affects 3-URU’s behavior. Moreover, putting the actuators on the base allows a substantial reduction of the mobile masses, thus promising good dynamic performances, and makes the remaining part of the limb a simple chain constituted by only passive R-pairs. The paper addresses the kinematics and the singularity analysis of this novel TPM and proves the effectiveness of the new design choices. The results presented here form the technical basis for the above-mentioned patent application. Full article

A buildings resilience to seismic activity can be increased by providing ways for the structure to dynamically counteract the effect of the Earth’s crust movements. This ability is fundamental in certain regions of the globe, where earthquakes are more frequent, and can be achieved using different strategies. State-of-the-art anti-seismic buildings have, embedded on their structure, mostly passive actuators such as base isolation, Tuned Mass Dampers (TMD) and viscous dampers that can be used to reduce the effect of seismic or even wind induced vibrations. The main disadvantage of this type of building vibration reduction strategies concerns their inability to adapt their properties in accordance to both the excitation signal or structural behaviour. This adaption capability can be promoted by adding to the building active type actuators operating under a closed-loop. However, these systems are substantially larger than passive type solutions and require a considerable amount of energy that may not be available during a severe earthquake due to power grid failure. An intermediate solution between these two extremes is the introduction of semi-active actuators such as magneto–rheological dampers. The inclusion of magneto–rheological actuators is among one of the most promising semi-active techniques. However, the overall performance of this strategy depends on several aspects such as the actuators number and location within the structure and the vibration sensors network. It can be the case where the installation leads to a non-collocated system which presents additional challenges to control. This paper proposes to tackle the problem of controlling the vibration of a non-collocated three-storey building by means of a brain–emotional controller tuned using an evolutionary algorithm. This controller will be used to adjust the stiffness coefficient of a magneto–rheological actuator such that the building’s frame oscillation under earthquake excitation, is mitigated. The obtained results suggest that, using this control strategy, it is possible to reduce the building vibration to secure levels. Full article

This study proposes a novel concept of actuator-driven frame-by-frame intermittent tracking for motion-blur-free video shooting of fast-moving objects. The camera frame and shutter timings are controlled for motion blur reduction in synchronization with a free-vibration-type actuator vibrating with a large amplitude at hundreds of hertz so that motion blur can be significantly reduced in free-viewpoint high-frame-rate video shooting for fast-moving objects by deriving the maximum performance of the actuator. We develop a prototype of a motion-blur-free video shooting system by implementing our frame-by-frame intermittent tracking algorithm on a high-speed video camera system with a resonant mirror vibrating at 750 Hz. It can capture 1024 × 1024 images of fast-moving objects at 750 fps with an exposure time of 0.33 ms without motion blur. Several experimental results for fast-moving objects verify that our proposed method can reduce image degradation from motion blur without decreasing the camera exposure time. Full article