Search Results (79)

As a large class of natural organic compounds, vegetable oil is generally composed of 95% fatty acid triglycerides and very few complex non-triglycerides. It has many advantages, such as sufficient yield, low price, distinct structural characteristics, and biodegradability. UV curing technology is known as a new method for the green industry in the 21st century due to its high efficiency, economy, energy conservation, high adaptability, and environmental friendliness. Therefore, UV-curable resins based on UV-curing technology has attracted widespread attention, converting epoxy soybean oil, castor oil, tung oil and other vegetable oils into high-performance plant oil-based UV-curable resins with higher molecular weight, multi-rigid ring and high reactivity, and the curing performance has been greatly improved, and the technology has been widely used in the field of polymer materials such as coatings, inks and adhesives. In this article, the recent research progress on this topic was summarized, and emphasis was put on the research on the resins from soybean oil and castor oil. Full article

Based on the formula for the sizing agent for basalt fiber, this paper presents a comprehensive study of the effects of lubricants on the properties of sizing agents, basalt fiber, and epoxy resin composite materials. Through testing and analysis of physical and chemical parameters, a new sizing agent with excellent performance was developed. The results demonstrated that the components and proportions of the lubricant significantly affected the physical and chemical parameters of the emulsion, as well as the mechanical properties of the basalt fibers and their epoxy resin composite materials. The lubricant with the combination ratio of 0.70% saturated fatty acid polyoxyethylene ester and 0.30% unsaturated fatty acid polyoxyethylene ester and imidazoline lubricant-I produced basalt fiber with the best mechanical properties. The single fiber tensile strength and yarn breaking strength increased by 18.42% and 12.5%. Furthermore, the lubricant with the combination ratio of 0.70% saturated fatty acid polyoxyethylene ester and 0.30% unsaturated fatty acid polyoxyethylene ester and imidazoline lubricant-III resulted in the best mechanical properties for Epoxy–BFRP composite materials. The tensile strength of the Epoxy–BFRP composite material increased by 13.2%, the tensile modulus increased by 45.2%, and the flexural strength increased by 12.0%. Full article

Bees rely on pollen and nectar for nutrition, but floral products provide more than just macronutrients; many also contain an array of plant secondary metabolites (PSMs). These compounds are generally thought to serve primarily defensive purposes but also appear to promote longevity and immune function, protect against disease agents, and detoxify toxicants. This review presents a comprehensive overview of PSMs, as well as some fatty acids, with documented health benefits for eusocial bees at ecologically relevant exposure levels and the plant species whose floral products and/or resin are known to contain them. We find medicinal metabolites to be widespread but unevenly distributed across the plant phylogeny, with a few families containing a majority of the species known to produce PSMs with documented health benefits. We discuss the current state of knowledge and identify gaps in our understanding. The existing literature on the health benefits of metabolites, and particularly PSMs, to bees is spread across multiple fields; our hope is that this review will bring these fields closer together and encourage further investigation of the role of metabolites in promoting bee health in ecological contexts. Full article

Alkyd resins are still one of the most important classes of binders for paint systems. They are outstanding in terms of their versatility of formulations and applications, cost-effectiveness, and durability. Traditionally, they are synthesized using phthalic anhydride, polyalcohols with three or four functional groups (pentaerythritol, glycerol, and trimethylolpropane), and fatty acids or oils. In this study, new bio-alkyd resins were synthesized with the objective of increasing the bio-based content by substituting phthalic anhydride, thereby also enhancing the biodegradability of coatings. The newly synthesized alkyd resins, formulated with azelaic acid, were used to develop coatings incorporating additives while avoiding cobalt-based driers. Additional agents such as leveling, wetting, and anti-skinning agents, were also included. Paints were applied to wood substrates and dried at room temperature. The resulting films were characterized by pendulum hardness, transparency, and color by colorimetry, cross-cut test, contact angle, and gloss. Thermal properties were analyzed by Differential Scanning Calorimetry (DSC), and Total Organic Carbon (TOC) content and aerobic biodegradation were also evaluated. The resulting coating films exhibited good mechanical performance, with hardness values ranging from 132 to 148 Persoz oscillations and strong adhesion to wood substrates (smooth cross-cut edges, Class 0). Significant biodegradability (70% in less than 90 days) was demonstrated under composting conditions, which was considerably higher than that of a commercial reference alkyd coating (34.7%) under the same conditions. These findings suggest that the developed bio-alkyd coatings formulated with azelaic acid and DCO-FA without cobalt-based driers represent a promising alternative to conventional phthalic acid-based alkyds. These novel coatings move closer to fully bio-based formulations and offer enhanced biodegradability, making them a more sustainable option for coating applications. Full article

The food industry generates the largest number of valuable by-products. The recovery of compounds such as fatty acids and polyphenols with notorious biological properties from biowaste is a new challenge in the circular economy scenario, as they represent value-added starting materials for the preparation of functional foods, food supplements, cosmetics and over-the-counter drugs. Less commonly explored are industrial wastewaters, which return to the nearby water streams without adequate treatment. Distillation wastewater (DWW) from the essential oils or agro-food industries may represent a valuable source of bioactive compounds to be valorized. In this work, DWW from rosemary was treated with different resins through dynamic and static adsorption/desorption approaches, for the recovery of phenolic compounds including rosmarinic acid. The most effective methodology, selected according to total phenolic and rosmarinic acid contents, as well as antioxidant activity evaluation, was applied to sage, thyme and oregano DWWs. The procedure provides several advantages compared with conventional separation processes, as it involves the lower consumption of reagents/solvents, low operational costs, ease of handling, and simplicity of scale-up. The results of this work highlight a fast and sustainable procedure for the recovery of rosmarinic acid and other phenolics (caffeic acid derivatives and flavonoid glycosides) from DWWS, thus affording a fraction with antioxidant and hypoglycemic activities. Full article

Chios mastiha is the natural aromatic resin of Pistacia lentiscus L. var. Chia, Anacardiaceae, which is exclusively cultivated in the southern part of the Greek island of Chios. Chios mastiha (P. lenticonus/Chios mastiha) is well-known for its distinctive taste and aroma and has been known since ancient times due to its healing properties in gastrointestinal and inflammatory disorders and because of its anti-bacterial and anti-fungal activities. In this study, the chemical composition, applying LC-QTOF-MS/MS analysis, and the antioxidant activities of three different polarity P. lenticonus/Chios mastiha fractions, apolar, medium polar, and polar, were characterized in human neuroblastoma SH-SY5Y cells. Chemical analysis of the fractions unveiled new components of P. lenticonus/Chios mastiha, mainly fatty acids compounds, known for their antioxidant activity and regulatory effects on lipid metabolism. By applying the MTT assay and confocal microscopy analysis, we showed that P. lenticonus/Chios mastiha fractions, especially the apolar and medium polar fractions, enriched in triterpenes and fatty acids, caused suppression of the H₂O₂-induced reduction in cell viability, ROS production, and depolarization of the mitochondrial membrane potential, in SH-SY5Y cells. Moreover, Western blot analysis revealed that apolar fraction, enriched in fatty acids, induced expression of the PPARα, which is well-known for its antioxidant activities and its crucial role in lipid metabolism. Induction of PPARα, a GR target gene, was also accompanied by an increase in GR protein levels. Enhanced antioxidant activities of the apolar fraction may be correlated with its chemical composition, enriched in fatty acids and triterpenoids. Thus, our results indicate the neuroprotective actions of P. lenticonus/Chios mastiha fractions, highlighting their potential application as neuroprotective agents in neurodegenerative diseases. Full article

This study optimizes the process conditions for preparing angiotensin-converting enzyme (ACE) inhibitory peptides from skimmed goat milk (SGM) hydrolyzed by multi-enzymes using response surface methodology. When the enzymatic hydrolysis time was 90 min, the optimal hydrolysis conditions were a pH of 8.49, enzyme-to-substrate ratio (E/S ratio) of 8.04%, and temperature of 61.54 °C. The hydrolysis degree and ACE inhibitory activity were 65.39% ± 0.01% and 84.65% ± 0.03%, respectively. After purification by ultrafiltration, macroporous resin, and gel filtration, the ACE inhibitory activity of F2-2 in the two components of F2 was higher, with the ACE inhibitory rate of 93.97% ± 0.15% and IC₅₀ of 0.121 ± 0.004 mg/mL. The content of hydrophobic amino acids, fatty amino acids, and aromatic amino acids in component F2-2 accounts for 73.17%, 33.86%, and 33.72%, respectively. Eleven peptides were isolated and identified from the F2-2 components of the enzymatic hydrolysate of SGM, including two peptides without an established database. The peptides mainly came from β casein, α_S1 casein, and α_S2 casein. Full article

Ipomoeassin F (Ipom-F) is a plant-derived macrocyclic resin glycoside that potently inhibits cancer cell growth through blockage of Sec61-mediated protein translocation at the endoplasmic reticulum. Recently, detailed structural information on how Ipom-F binds to Sec61α was obtained using Cryo-EM, which discovered that polar interactions between asparagine-300 (N300) in Sec61α and four oxygens in Ipom-F are crucial. One of the four oxygens is from the carbonyl group at C-4 of the fatty acid chain. In contrast, our previous structure–activity relationship (SAR) studies suggest that the carbonyl group is not essential. To resolve this discrepancy, we designed and synthesized two new open-chain analogues (10 and 11); 10 without the C-4 carbonyl had a dramatic activity loss, whereas 11 with an amide functional group was even more potent than Ipom-F. These new SAR data, in conjunction with some previous SAR information, imply two functional roles of the C-4 carbonyl: (1) to form H-bonds with N300; and (2) to regulate interactions of the fatty acid chain with membrane lipids. Impacts of these dual functions on antiproliferation depend on the overall structure of an Ipom-F derivative. Moreover, 11 can serve as a lead compound for developing future amino acid/peptide-modified analogues of Ipom-F with improved therapeutic properties. Full article

Cation exchange resin (CER) has been reported to promote sludge fermentation. However, previous studies have typically focused on the effects of CER on sludge properties to enhance fermentation, and the role of CER as a biocarrier for anaerobic consortia during fermentation has been overlooked. Thus, in this study, the potential of gel-type and macro-reticular type CERs to serve as biocarriers in fermentation was investigated. A significant number of anaerobes appeared to be attached to the surfaces of CER during 2-day fermentation. However, an extended fermentation time negatively affected the attachment of anaerobic consortia, suggesting that CER may be a suitable carrier for short-term fermentation processes, such as biohydrogen fermentation. Electrochemical analyses revealed that the electron transfer capacities of CER with attached anaerobes were enhanced after both 2-day and 28-day fermentation periods, with the macro-reticular type CER exhibiting higher electron transfer capacity than the gel-type CER. Fermentation experiments using mixing model substrates with macro-reticular and gel-type CERs with attached anaerobes showed that the macro-reticular type CER was more beneficial for biohydrogen fermentation than the gel-type CER. Further analyses of microbial communities revealed that hydrogen-producing bacteria (i.e., Caloramator, unclassified_f_Caloramatoraceace, and Sporanaerobacter) were more likely to adhere to the macro-reticular type CERs. This outcome confirmed that macro-reticular type CERs have significant potential as a carrier for anaerobic consortia to promote the generation of hydrogen and volatile fatty acids. These findings are expected to provide a reference for using materials as biocarriers to enhance the biohydrogen fermentation of sludge. Full article

Exploring the interface of environmental sustainability and civil infrastructure development, this study introduces waste butter (WB), a byproduct of animal fat processing, as a novel bio-modifier in asphalt production. This approach not only recycles animal waste but also charts a course for sustainable infrastructural development, contributing to a reduced environmental impact and promoting circular economy practices. The experiments incorporated varying WB concentrations (e.g., 3%, 6%, and 9% by weight of binder) into standard AP-5 asphalt, employing advanced analytical tools for comprehensive characterization. These included thin-layer chromatography–flame ionization detection (TLC-FID), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and Differential Scanning Calorimetry (DSC). The critical properties of the asphalt blends, such as penetration, softening point, viscosity, ductility, rutting factor (Dynamic Shear Rheometer), and thermal susceptibility (Penetration Index, Penetration–Viscosity Number), were assessed. FT-IR analysis indicated negligible chemical alteration with WB addition, suggesting predominantly physical interactions. TLC-FID showed a decrease in aromatic and asphaltene components but an increase in resin content, highlighting the influence of WB’s fatty acids on the asphalt’s chemical balance. The colloidal instability index (I_C) confirmed enhanced stability due to WB’s high resin concentration. Meanwhile, SEM analysis revealed microstructural improvements with WB, enhancing binder compatibility. TGA demonstrated that even a minimal 3 wt. % WB addition significantly improved thermal stability, while the DSC results pointed to improved low-temperature performance, reducing brittleness in cold conditions. Rheologically, WB incorporation resulted in increased penetration and ductility, balanced by decreased viscosity and softening point, thereby demonstrating its multi-faceted utility. Thermal susceptibility tests emphasized WB’s effectiveness in cold environments, with further evaluation needed at higher temperatures. The DSR findings necessitate careful WB calibration to meet Superpave rutting standards. In conclusion, this research positions waste butter as a superior, environmentally aligned bio-additive for asphalt blends, contributing significantly to eco-friendly civil engineering practices by repurposing animal-derived waste. Full article

Cutin, one of the main structural components of tomato peels, is a waxy biopolymer rich in hydroxylated fatty acids. In this study, 10,16-dihydroxyhexadecanoic acid (10,16-diHHDA) was extracted and isolated from tomato peels and exploited to develop fully crosslinked polyesters as potential candidates for replacing fossil-based metal protective coatings. A preliminary screening was conducted to select the base formulation, and then a design of experiments (DoE) was used as a methodology to identify the optimal composition to develop a suitable coating material. Different formulations containing 10,16-diHHDA and other biorefinery monomers, including 2,5-furandicarboxylic acid, were considered. To this end, all polyesters were characterized through differential scanning calorimetry (DSC) and gel content measurements to determine their T_g value and crosslinking efficiency. Compositions exhibiting the best trade-off between T_g value, chemical resistance, and sufficiently high 10,16-diHHDA content between 39 and 48 wt.% were used to prepare model coatings that were characterized for assessing their wettability, scratch hardness, chemical resistance, and adhesion to metal substrates. These polyester coatings showed a T_g in the range of 45–55 °C, a hydrophobic behavior with a water contact angle of around 100°, a good solvent resistance (>100 MEK double rubs), and an adhesion strength to steel higher than 2 MPa. The results obtained confirmed the potential of cutin-based resins as coatings for metal protection, meeting the requirements for ensuring physicochemical properties of the final product, as well as for optimizing the valorization of such an abundant agri-food waste as tomato peels. Full article

Butyric acid, a four-carbon fatty acid, is an important industrial chemical and feedstock. To produce this chemical, a control fermentation was run with a 126.5 g.L⁻¹ glucose concentration in the feed medium. In this medium, the strain produced 44.8 g.L⁻¹ total acid with a productivity of 0.23 g.L⁻¹h⁻¹ and a yield of 0.41 g.g⁻¹. The strain (Clostridium tyrobutyricum ATCC 25755) was also able to utilize glucose and xylose simultaneously with similar fermentation performance. The culture was also used to produce butyric acid from wheat straw hydrolysate (WSH) employing a hot water pretreatment. In a batch system, the strain resulted in a productivity and yield of 0.27 g.L⁻¹h⁻¹ and 0.44 g.g⁻¹, respectively, which was an improvement over the use of glucose or xylose alone or mixtures of both. To improve reactor productivity, a membrane cell recycle bioreactor was used which resulted in a productivity of 1.89 g.L⁻¹h⁻¹. This productivity was 822% of that achieved in the glucose or xylose batch fermentation. Furthermore, a butyric acid recovery method was developed using XAD-4 adsorbent resin. In this system, up to 206.1 g.L⁻¹ of butyric acid was used in the feed and, as a result of the quick adsorption, the residual butyric acid concentration was 29.5 g.L⁻¹. In this experiment, the rate of acid removal of 1059.4 g.L⁻¹h⁻¹ was achieved. Full article

This study investigates the potential of fatty acid methyl esters (FAME) as environmentally sustainable alternatives to traditional solvents for the removal of low-polarity materials commonly found in cultural heritage artefacts. Recognizing the environmental and health concerns associated with conventional solvents, this research focuses on FAME to remove low/non-polarity or non-polar substances used in cultural heritage preservation. Laboratory samples coated with low molecular synthetic resins (LMW) such as Regalrez 1094 and microcrystalline wax were treated with FAME applied in gel to prevent solvent–substrate interactions. Photographic documentation under UV-vis light, optical microscope observations, and spectrocolorimetric analysis were used for assessing surface “cleanness”, while FTIR-ATR spectroscopy was used to detect possible residue from treatment. Moreover, SEM analysis was used for a better understanding of the results. The best results were obtained using FAME base on methyl stearate according to Hansen-RED. Full article

Dioscorea spp. is known for its myriad medicinal properties. D. alata, specifically crude extracts, have displayed potent anticancer properties. However, the chemical constituents of these extracts have not been examined. The aim of this study is to determine the chemical composition and antioxidant characteristics of the active extracts from D. alata tuber. Chemoinformatic profiling of the Jamaican Dioscorea alata cultivar white yam tuber was generated by a sequential Soxhlet extraction of dried milled tuber, producing five crude extracts: hexane (E-1), diethyl ether (E-2), acetone (E-3), ethanol (E-4) and water (E-5). The analytes within the five extracts were dissolved in 0.1% DMSO and their anticancer activity was determined using DU145 prostate cancer cells. Both the acetone and the ethanolic extract were able to induce greater than 50% cell death at 50 µg/mL. The order of growth inhibition of the extracts in DU-145 cell is E3 (IC₅₀, 10.81 µg/mL) > E-4 (IC₅₀ 24.17 µg/mL) > E-1 (IC₅₀ > 100 µg/mL) ≥ E-2 (IC₅₀ > 100 µg/mL) ≥ E-5 (IC₅₀ > 100 µg/mL). Phytochemical screening of both E-3 and E-4 revealed the presence of all major classes of secondary metabolites except tannins. Resins were also absent in the E-3 extract. Phenolic quantification indicated that E-3 and E-4 possessed GAEs of 31 ± 1.1 and 72 ± 1.8 mg per g of sample, respectively. Inversely, E-3 displayed greater antioxidant capability with IC₅₀ of 82.9 µg/mL compared to E-4 (166.9 µg/mL); however, neither was comparable to citric acid (33.6 µg/mL). The extract E-3 was further isolated by HPLC into 11 fractions. Fractions 4 and 5 possessed potent cell growth inhibitory effects. GCMs of fractions 4 and 5 showed they possessed numerous saturated fatty acids with pharmacological relevance. The presence of these compounds shows potential for exploitation of D. alata extracts for pharmacological purposes. Full article

Cornelian cherry (Cornus mas L.) fruits, abundant in iridoids and anthocyanins, are natural products with proven beneficial impacts on the functions of the cardiovascular system and the liver. This study aims to assess and compare whether and to what extent two different doses of resin-purified cornelian cherry extract (10 mg/kg b.w. or 50 mg/kg b.w.) applied in a cholesterol-rich diet rabbit model affect the levels of sterol regulatory element-binding protein 1c (SREBP-1c) and CCAAT/enhancer binding protein α (C/EBPα), and various liver X receptor-α (LXR-α), peroxisome proliferator-activated receptor-α (PPAR-α), and peroxisome proliferator-activated receptor-γ (PPAR-γ) target genes. Moreover, the aim is to evaluate the resistive index (RI) of common carotid arteries (CCAs) and aortas, and histopathological changes in CCAs. For this purpose, the levels of SREBP-1c, C/EBPα, ATP-binding cassette transporter A1 (ABCA1), ATP-binding cassette transporter G1 (ABCG1), fatty acid synthase (FAS), endothelial lipase (LIPG), carnitine palmitoyltransferase 1A (CPT1A), and adiponectin receptor 2 (AdipoR2) in liver tissue were measured. Also, the levels of lipoprotein lipase (LPL), visceral adipose tissue-derived serine protease inhibitor (Vaspin), and retinol-binding protein 4 (RBP4) in visceral adipose tissue were measured. The RI of CCAs and aortas, and histopathological changes in CCAs, were indicated. The oral administration of the cornelian cherry extract decreased the SREBP-1c and C/EBPα in both doses. The dose of 10 mg/kg b.w. increased ABCA1 and decreased FAS, CPT1A, and RBP4, and the dose of 50 mg/kg b.w. enhanced ABCG1 and AdipoR2. Mitigations in atheromatous changes in rabbits’ CCAs were also observed. The obtained outcomes were compared to the results of our previous works. The beneficial results confirm that cornelian cherry fruit extract may constitute a potentially effective product in the prevention and treatment of obesity-related disorders. Full article