Search Results (24)

Hydrogel-based sensors have emerged as transformative soft-sensing platforms, featuring tissue-matched compliance, high water content, stimuli responsiveness, and chemical tunability, properties which are unachievable with conventional rigid sensors. Despite substantial advances, the existing reviews focus on individual polymer categories, discrete transduction mechanisms, or targeted standalone applications, failing to establish an integrated pipeline from material design to final sensing performance. This review fills these crucial gaps by systematically correlating polymer chemistry, crosslinking tactics, and fabrication protocols with the selection of transduction mechanisms and resultant sensing performance across biomedical and environmental fields. We conduct a critical assessment of natural and synthetic polymers together with chemical, physical, and hybrid composite crosslinking methodologies. Multiple sensing modalities, including piezoresistive, capacitive, thermogalvanic, electrochemical, colorimetric, ratiometric fluorescence, and piezoionic sensing are elaborated alongside representative quantitative performance parameters. Emerging platforms, including self-powered thermogalvanic sensors, SERS-integrated biosensors, and MXene/MOF composites, are highlighted as underexplored frontiers. In addition, persistent bottlenecks including dehydration-derived signal drift, inferior long-term operational stability, unsatisfactory target selectivity, and obstacles toward large-scale manufacturability are rigorously analyzed. Ultimately, this review constructs a holistic unified framework bridging polymer molecular design, fabrication engineering, signal transduction, and practical end-use applications, laying a clear developmental roadmap for next-generation flexible and smart hydrogel-based sensing systems. Full article

Two-dimensional (2D) materials, particularly MXenes and transition metal dichalcogenides (TMDs), have attracted intense interest as supercapacitor electrodes due to their high surface area and tunable electronic structure. However, large discrepancies persist between the quantum capacitance values predicted by density functional theory (DFT) calculations and experimentally measured gravimetric capacitances. In this review, we critically analyze DFT methodologies, surface models, normalization strategies, and electrochemical characterization protocols, and compile an extensive dataset of reported MXene and TMD systems to quantify the degree of experimental–theoretical agreement. We show that MXenes typically achieve less than 20% of their predicted capacitance because of restacking, surface terminations, and limited ion accessibility, whereas TMDs exhibit substantially better correspondence, often approaching or exceeding 70% of theoretical values. These results indicate that the theoretical capacitance predicted by DFT is primarily determined by the electronic structure of the material, which defines the upper limit of charge storage, whereas the experimentally achieved capacitance is largely controlled by morphological factors, surface chemistry, and electrode architecture that limit ion accessibility. Full article

Graphene nanoplatelets (GNPs) represent a promising class of carbon nanomaterials bridging the gap between graphite and monolayer graphene. Their unique combination of high electrical conductivity, large specific surface area, mechanical strength, and chemical stability makes them attractive for advanced energy storage applications. This review summarizes recent developments in the synthesis, functionalization, characterization, and application of GNPs in supercapacitors, batteries, and hybrid systems. The influence of key structural parameters—such as flake thickness, lateral size, surface chemistry, and defect density—on electrochemical performance is discussed, highlighting structure–property correlations. Particular emphasis is placed on scalable production methods, including mechanical, liquid-phase, and electrochemical exfoliation, as well as edge functionalization and heteroatom doping strategies. Comparative analyses show that GNP-based electrodes can significantly improve specific capacitance, conductivity, and cycling stability, especially when used in composites with polymers or metal oxides. The review also addresses current challenges related to aggregation, dispersion, standardization, and environmental impact. Finally, prospects for the development of sustainable, low-emission GNP production and its integration into next-generation energy storage systems are outlined. Full article

The rational design of transition metal oxides with tailored electronic structures and defect chemistries is critical for advancing high-performance supercapacitors. Herein, we report the engineering of cobalt oxide (Co₃O₄) gels through controlled sol–gel synthesis and rare earth (RE) incorporation using neodymium (Nd), gadolinium (Gd), and dual neodymium/gadolinium (Nd/Gd) doping. X-ray diffraction (XRD) confirmed the preservation of the cubic spinel structure with systematic peak shifts and broadening, evidencing lattice strain, oxygen vacancy generation, and defect enrichment. Field-emission scanning electron microscopy (FE-SEM) analyses revealed distinct morphological evolution from compact nanoparticle assemblies in pristine Co₃O₄ to highly porous, interconnected frameworks in Nd/Gd–Co₃O₄ (Nd/Gd-Co). X-ray photoelectron spectroscopy (XPS) verified the stable incorporation of RE ions, accompanied by electronic interaction with the Co–O matrix and enhanced oxygen defect states. Electrochemical measurements demonstrated that the Nd/Gd–Co electrode achieved a remarkable areal capacitance of 25 F/cm² at 8 mA/cm², superior ionic diffusion coefficients, and the lowest equivalent series resistance (0.26 Ω) among all samples. Long-term cycling confirmed 84.35% capacitance retention with 94.46% coulombic efficiency after 12,000 cycles. Furthermore, the asymmetric pouch-type supercapacitor (APSD) constructed with Nd/Gd–Co as the positive electrode and activated carbon as the negative electrode delivered a wide operational window of 1.5 V, an areal capacitance of 140 mF/cm², an energy density of 0.044 mWh/cm², and 89.44% retention after 7000 cycles. These findings establish Nd/Gd-Co gels as robust and scalable electrode materials and demonstrate that RE co-doping is an effective strategy for bridging high energy density with long-term electrochemical stability in asymmetric supercapacitors. Full article

Supercapacitors are considered a bridge between batteries and capacitors due to their significant energy density, as well as power density. Herein, we prepared two novel electrodes of Fe_0.8Co_0.2S and Fe_0.8Co_0.2S/rGO composites and analyzed their supercapacitor performance. The results indicated that Fe_0.8Co_0.2S/rGO, prepared through co-precipitation and annealing, exhibited a higher specific capacitance value and improved electrochemical properties in comparison to Fe_0.8Co_0.2S due to the synergistic effect of rGO with Fe_0.8Co_0.2S. X-ray diffraction (XRD) confirmed the desired phases of Fe_0.8Co_0.2S, while scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) verified the microstructures and desired elements. Cyclic voltammetry (CV) confirmed an enhanced oxidation current from +25 mA to +49 mA at 10 mV/s, while galvanometric charge–discharge (GCD) showed an enhanced discharge time from 78 s to 300 s. As a result, the specific capacitance and energy density were enhanced from 74.3 F/g to 285.7 F/g and 2.84 Wh/kg to 10.9 Wh/kg, respectively. This contributed to a more than 283% increase in specific capacitance, as well as energy density. Overall, Fe_0.8Co_0.2S/rGO shows great potential for small-scale energy storage devices. Full article

5-Hydroxymethylfurfural (HMF) serves as an important bridge connecting biomass resources with fossil fuels. Its downstream product, 2,5-furandicarboxylic acid (FDCA), is a renewable alternative to terephthalic acid (TPA) in the synthesis of various polymer materials. In this study, we successfully synthesized four ruthenium-based catalysts with varying valence states supported on carbon nanotubes (CNTs) and compared the performance of HMF electrooxidation. Among these, the Ru^+2.9 catalyst demonstrated the highest activity for the electrochemical oxidation of HMF to FDCA in the neutral medium (0.1 M K₂SO₄). Notably, the FDCA yield reached 90.2% under an applied potential of 0.95 V (vs. Ag/AgCl) after 24 h. Mechanistic analysis revealed that the superior specific capacitance of the Ru^+2.9 catalyst significantly facilitated the reaction process. This work represents a more cost-effective approach to avoid the need for excessive alkaline additives during catalyst preparation and the HMF oxidation process, and FDCA separated easily after cooling the reaction solution down. Full article

In recent years, polybenzoxazine aerogels have emerged as promising materials for various applications. However, their full potential has been hindered by the prevalent use of hazardous solvents during the preparation process, which poses significant environmental and safety concerns. In light of this, there is a pressing need to explore alternative methods that can mitigate these issues and propel the practical utilization of polybenzoxazine aerogels. To address this challenge, a novel approach involving the synthesis of heteroatom self-doped mesoporous carbon from polybenzoxazine has been devised. This process utilizes eugenol, stearyl amine, and formaldehyde to create the polybenzoxazine precursor, which is subsequently treated with ethanol as a safer solvent. Notably, the incorporation of boric acid in this method serves a dual purpose: it not only facilitates microstructural regulation but also reinforces the backbone strength of the material through the formation of intermolecular bridged structures between polybenzoxazine chains. Moreover, this approach allows ambient pressure drying, further enhancing its practicability and environmental friendliness. The resultant carbon materials, designated as ESC-N and ESC-G, exhibit distinct characteristics. ESC-N, derived from calcination, possesses a surface area of 289 m² g⁻¹, while ESC-G, derived from the aerogel, boasts a significantly higher surface area of 673 m² g⁻¹. Furthermore, ESC-G features a pore size distribution ranging from 5 to 25 nm, rendering it well suited for electrochemical applications such as supercapacitors. In terms of electrochemical performance, ESC-G demonstrates exceptional potential. With a specific capacitance of 151 F g⁻¹ at a current density of 0.5 A g⁻¹, it exhibits superior energy storage capabilities compared with ESC-N. Additionally, ESC-G displayed a more pronounced rectangular shape in its cyclic voltammogram at a low voltage scanning rate of 20 mV s⁻¹, indicative of enhanced electrochemical reversibility. The impedance spectra of both carbon types corroborated these findings, further validating the superior performance of ESC-G. Furthermore, ESC-G exhibits excellent cycling stability, retaining its electrochemical properties even after 5000 continuous charge–discharge cycles. This robustness underscores its suitability for long-term applications in supercapacitors, reaffirming the viability of heteroatom-doped polybenzoxazine aerogels as a sustainable alternative to traditional carbon materials. Full article

Supercapacitors (SCs) are considered as emerging energy storage devices that bridge the gap between electrolytic capacitors and rechargeable batteries. However, due to their low energy density, their real-time usage is restricted. Hence, to enhance the energy density of SCs, we prepared hetero-atom-doped carbon along with bimetallic oxides at different calcination temperatures, viz., HC/NiCo@600, HC/NiCo@700, HC/NiCo@800 and HC/NiCo@900. The material produced at 800 °C (HC/NiCo@800) exhibits a hierarchical 3D flower-like morphology. The electrochemical measurement of the prepared materials was performed in a three-electrode system showing an enhanced specific capacitance for HC/NiCo@600 (Cs = 1515 F g⁻¹) in 1 M KOH, at a current density of 1 A g⁻¹, among others. An asymmetric SC device was also fabricated using HC/NiCo@800 as anode and HC as cathode (HC/NiCo@600//HC). The fabricated device had the ability to operate at a high voltage window (~1.6 V), exhibiting a specific capacitance of 142 F g⁻¹ at a current density of 1 A g⁻¹; power density of 743.11 W kg⁻¹ and energy density of 49.93 Wh kg⁻¹. Altogether, a simple strategy of hetero-atom doping and bimetallic inclusion into the carbon framework enhances the energy density of SCs. Full article

Among electrochemical energy storage (EES) technologies, rechargeable batteries (RBs) and supercapacitors (SCs) are the two most desired candidates for powering a range of electrical and electronic devices. The RB operates on Faradaic processes, whereas the underlying mechanisms of SCs vary, as non-Faradaic in electrical double-layer capacitors (EDLCs), Faradaic at the surface of the electrodes in pseudo-capacitors (PCs), and a combination of both non-Faradaic and Faradaic in hybrid supercapacitors (HSCs). EDLCs offer high power density but low energy density. HSCs take advantage of the Faradaic process without compromising their capacitive nature. Unlike batteries, supercapacitors provide high power density and numerous charge–discharge cycles; however, their energy density lags that of batteries. Supercapatteries, a generic term that refers to hybrid EES devices that combine the merits of EDLCs and RBs, have emerged, bridging the gap between SCs and RBs. There are numerous articles and reviews on EES, and many of those articles have emphasized various aspects of HSCs and supercapatteries. However, there are no recent reviews that dealt with supercapatteries in general. Here, we review recently published critically selected articles on supercapatteries. The review discusses different EES devices and how supercapatteries are different from others. Also discussed are properties, design strategies, and future perspectives on supercapatteries. Full article

Wirobond^® C is a commercial dental casting alloy suitable for the fabrication of crowns, bridges, and metal ceramic restorations. This study aims to investigate the effect of ready-to-use Listerine^® and Meridol^® mouthwashes and sodium fluoride on the resistance of CoCrMo dental alloys to electrochemical corrosion in artificial saliva at 37 °C. SEM, EDS, SKP, and microhardness investigations were carried out to characterize the material under study. The in vitro corrosion resistance of the CoCrMo alloy was conducted using the open-circuit potential method, electrochemical impedance spectroscopy, and anodic polarization curves. The presence of Co 59.8(8) wt.%, Cr 31.5(4) wt.%, and Mo 8.8(6) wt.% was confirmed. The CoCrMo alloy was characterized by a Vickers microhardness value of 445(31) µHV_0.3. Based on the EIS data, the capacitive behavior and high corrosion resistance of the CoCrMo alloy were revealed. The kinetics of pitting corrosion in the artificial saliva were lower after being modified with NaF, Listerine^®, and Meridol^® mouthwashes. The potentiodynamic characteristics revealed the passive behavior of the CoCrMo alloy in all solutions. Based on the SKP measurements of the CoCrMo alloy after corrosion tests, the effect of artificial saliva modification on the electronic properties of Bego Wirobond^® C dental alloy was found. Full article

Lithium-ion capacitors (LiC) are promising hybrid devices bridging the gap between batteries and supercapacitors by offering simultaneous high specific power and specific energy. However, an indispensable critical component in LiC is the capacitive cathode for high power. Activated carbon (AC) is typically the cathode material due to its low cost, abundant raw material for production, sustainability, easily tunable properties, and scalability. However, compared to conventional battery-type cathodes, the low capacity of AC remains a limiting factor for improving the specific energy of LiC to match the battery counterparts. This review discusses recent approaches for achieving high-performance LiC, focusing on the AC cathode. The strategies are discussed with respect to active material property modifications, electrodes, electrolytes, and cell design techniques which have improved the AC’s capacity/capacitance, operating potential window, and electrochemical stability. Potential strategies and pathways for improved performance of the AC are pinpointed. Full article

The ability to bridge ionic and electronic transport coupled with large volumetric capacitance renders organic electrochemical transistors (OECTs) ideal candidates for bioelectronic applications. Adopting ionic-liquid-based solid electrolytes extends their applicability and facilitates large-area printable productions. However, OETCs employing solid electrolytes tend to show a pronounced hysteresis in the transfer curve. A detailed understanding of the hysteresis is crucial for their accurate characterizations and reliable applications. Here, we demonstrated fully photopatternable poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:Tos)- based OECTs incorporating the ionic liquid [EMIM][EtSO₄] in a solid electrolyte (SE). The PEDOT:Tos films deposited through vapor phase polymerization (VPP) were annealed for different durations after the polymerization step. Upon rinsing with ethanol and the deposition of the SE, the OECTs made of these films showed impressive bias stress stability under prolonged operation cycles, a high switching ratio, a low threshold voltage, and a high transconductance. Furthermore, by taking transfer measurements with different sweep rates, we revealed two distinct regimes of hysteresis: kinetic hysteresis and non-kinetic hysteresis. We observed pronounced changes in these regimes after annealing. Finally, impedance spectroscopy exhibited that the PEDOT:Tos turned from a Faradaic to a non-Faradaic response through annealing, explaining the observed hysteresis changes in both regimes. Full article

Electrochemical energy storage devices are one of the main protagonists in the ongoing technological advances in the energy field, whereby the development of efficient, sustainable, and durable storage systems aroused a great interest in the scientific community. Batteries, electrical double layer capacitors (EDLC), and pseudocapacitors are characterized in depth in the literature as the most powerful energy storage devices for practical applications. Pseudocapacitors bridge the gap between batteries and EDLCs, thus supplying both high energy and power densities, and transition metal oxide (TMO)-based nanostructures are used for their realization. Among them, WO₃ nanostructures inspired the scientific community, thanks to WO₃’s excellent electrochemical stability, low cost, and abundance in nature. This review analyzes the morphological and electrochemical properties of WO₃ nanostructures and their most used synthesis techniques. Moreover, a brief description of the electrochemical characterization methods of electrodes for energy storage, such as Cyclic Voltammetry (CV), Galvanostatic Charge–Discharge (GCD), and Electrochemical Impedance Spectroscopy (EIS) are reported, to better understand the recent advances in WO₃-based nanostructures, such as pore WO₃ nanostructures, WO₃/carbon nanocomposites, and metal-doped WO₃ nanostructure-based electrodes for pseudocapacitor applications. This analysis is reported in terms of specific capacitance calculated as a function of current density and scan rate. Then we move to the recent progress made for the design and fabrication of WO₃-based symmetric and asymmetric supercapacitors (SSCs and ASCs), thus studying a comparative Ragone plot of the state-of-the-art research. Full article

Conductive electrochemically active metallopolymers are outstanding materials for energy storage and conversion, electrocatalysis, electroanalysis, and other applications. The hybrid inorganic–organic nature of these materials ensures their rich chemistry and offers wide opportunities for fine-tuning their functional properties. The electrochemical modulation of the nanomechanical properties of metallopolymers is rarely investigated, and the correlations between the structure, stiffness, and capacitive properties of these materials have not yet been reported. We use electrochemical atomic force microscopy (EC-AFM) to perform in-situ quantitative nanomechanical measurements of two Schiff base metallopolymers, poly[NiSalphen] and its derivative that contains two methoxy substituents in the bridging phenylene diimine unit poly[NiSalphen(CH₃O)₂], during their polarization in the electrolyte solution to the undoped and fully doped states. We also get insight into the electrochemical p-doping of these polymers using electrochemical quartz crystal microgravimetry (EQCM) coupled with cyclic voltammetry (CV). Combined findings for the structurally similar polymers with different interchain interactions led us to propose a correlation between Young’s modulus of the material, its maximum doping level, and ion and solvent fluxes in the polymer films upon electrochemical oxidation. Full article

Biolayer interferometry (BLI) is a well-established laboratory technique for studying biomolecular interactions important for applications such as drug development. Currently, there are interesting opportunities for expanding the use of BLI in other fields, including the development of rapid diagnostic tools. To date, there are no detailed frameworks for implementing BLI in target-recognition studies that are pivotal for developing point-of-need biosensors. Here, we attempt to bridge these domains by providing a framework that connects output(s) of molecular interaction studies with key performance indicators used in the development of point-of-need biosensors. First, we briefly review the governing theory for protein-ligand interactions, and we then summarize the approach for real-time kinetic quantification using various techniques. The 2020 PRISMA guideline was used for all governing theory reviews and meta-analyses. Using the information from the meta-analysis, we introduce an experimental framework for connecting outcomes from BLI experiments (K_D, k_on, k_off) with electrochemical (capacitive) biosensor design. As a first step in the development of a larger framework, we specifically focus on mapping BLI outcomes to five biosensor key performance indicators (sensitivity, selectivity, response time, hysteresis, operating range). The applicability of our framework was demonstrated in a study of case based on published literature related to SARS-CoV-2 spike protein to show the development of a capacitive biosensor based on truncated angiotensin-converting enzyme 2 (ACE2) as the receptor. The case study focuses on non-specific binding and selectivity as research goals. The proposed framework proved to be an important first step toward modeling/simulation efforts that map molecular interactions to sensor design. Full article