Search Results (6)

With the globalized deployment of cross-border vehicle location services and the trajectory data, which contain user identity information and geographically sensitive features, the variability in privacy regulations in different jurisdictions can further exacerbate the technical and compliance challenges of data privacy protection. Traditional static differential privacy mechanisms struggle to accommodate spatiotemporal heterogeneity in dynamic scenarios because of the use of a fixed privacy budget parameter, leading to wasted privacy budgets or insufficient protection of sensitive regions. This study proposes a reinforcement-learning-based dynamic noise optimization method (DNO-RL) that dynamically adjusts the Laplacian noise scale by real-time sensing of vehicle density, region sensitivity, and the remaining privacy budget via a deep Q-network (DQN), with the aim of providing context-adaptive differential privacy protection for cross-border vehicle location services. Simulation experiments of cross-border scenarios based on the T-Drive dataset showed that DNO-RL reduced the average localization error by 28.3% and saved 17.9% of the privacy budget compared with the local differential privacy under the same privacy budget. This study provides a new paradigm for the dynamic privacy–utility balancing of cross-border vehicular networking services. Full article

Thedistribution of products stands out as one of the pivotal activities for logistics companies in recent years, particularly in the aftermath of the COVID-19 pandemic and other geopolitical events. Intense competition compels companies to efficiently execute their logistical processes, with cross-docking emerging as a frequently applied solution. However, the location of cross-dock terminals in urban areas remains a problem insufficiently addressed in the literature, with a dearth of studies and models tackling this issue. This paper introduces a novel and innovative model for locating cross-dock terminals based on the CI-DEA–IDOCRIW–MABAC (Composite Indicators–Data Envelopment Analysis-Integrated Determination of Objective Criteria Weights–Multi-Attributive Border Approximation Area Comparison) methods. In the process of defining input indicators, the following three sources were utilized: relevant literature, practical insights from logistics experts, and the knowledge and experience of the authors. Eight inputs and three outputs were considered (the number of users in the observed channel; the area served by the channel; the average distance a vehicle travels in one delivery; the required number of vehicles; labor availability; competition; construction, and expansion possibilities; proximity to the main infrastructure and traffic facilities; the average number of deliveries; average delivered quantity; and service level). The model underwent testing in a case study analyzing nine distribution channels (areas within the observed urban zone). The results indicated that alternative A4 (in the southwest area) ranked the highest since it was the best-ranked in accordance with the most important criteria, suggesting that the terminal is best located in the southwest zone. The accuracy of the results was confirmed by company management. By developing a completely new model and addressing the identified gap in the literature, this paper provides unequivocal scientific contributions. Full article

International trade is a critical part of the United States economy. Land border crossings between the United States and Mexico accounts for a large proportion of the USD 779 billion in trade between these two countries. Monitoring and managing the operations of these land border crossings is critical for ensuring efficient trade and providing appropriate security. This paper examines the opportunity to use connected vehicle data to monitor the travel time delay of passenger vehicles crossing the border for system level assessment across 26 border crossing locations over an analysis period of 25 days in August 2020. A sample size of 51,341 trips from the US to Mexico and 41,708 trips from Mexico to the US were used in this study. Furthermore, 97% trips to the US and 76% trips to Mexico experienced delays. The average delay was 34 min for trips to the US compared to only 2 min for trips to Mexico. In terms of the predictability of border crossing times, there was also substantial variation by direction. The interquartile range of vehicle delay from the US to Mexico was 2 min, while the interquartile range of delay for vehicles travelling from Mexico to the US was 46 min. Border crossings were also ranked using four performance metrics—trip counts, median delay, delayed trip counts and total delays in vehicle hours. Methods for summarizing delay trends by time of the day and day of the week to identify time windows of interest are also presented. Land border crossing operations have a significant influence on security and economic efficiency. We believe the techniques presented in this paper provide a scalable methodology for providing near real-time factual data on border crossing delays that provide important information for land border transport-managing stakeholders to make informed management decisions that balance security and economic efficiency. Full article

The mathematical study known as queueing theory has recently become a major point of interest for many government agencies and private companies for increasing efficiency. One such application is vehicle queueing at an international port-of-entry (POE). When queueing, fumes from idling vehicles negatively affect the overall health and well-being of the community, especially the U.S. Customs and Border Protection (CBP) agents that work at the POEs. As such, there is a need to analyze and optimize the border crossing queuing operations to minimize wait times and number of vehicles in the queue and, thus, reduce the vehicle emissions. For this research, the U.S.–Mexico POE located at The Gateway International Bridge in Brownsville, Texas, is used as a case study. Due to data privacy concerns, the hourly wait times for vehicles arriving at the border had to be extracted manually each day using a live wait time tracker online. The data extraction was performed for the month of March 2022. Using these wait times, a queueing simulation software, SIMIO, was used to develop an interactive simulation model and calibrate the service rates. The output from the SIMIO model was then used to develop an artificial neural network (ANN) to predict hourly particulate matter content with an R² of 0.402. From the ANN, a predictive equation has been developed, which may be used by CBP to make operational decisions and improve the overall efficiency of this POE. Thus, lowering the average wait times and the emissions from idling vehicles in the queue. Full article

Large civil structures such as bridges must be permanently monitored to ensure integrity and avoid collapses due to damage resulting in devastating human fatalities and economic losses. In this article, a wavelet-based method called the Wavelet Energy Accumulation Method (WEAM) is developed in order to detect, locate and quantify damage in vehicular bridges. The WEAM consists of measuring the vibration signals on different points along the bridge while a vehicle crosses it, then those signals and the corresponding ones of the healthy bridge are subtracted and the Continuous Wavelet Transform (CWT) is applied on both, the healthy and the subtracted signals, to obtain the corresponding diagrams, which provide a clue about where the damage is located; then, the border effects must be eliminated. Finally, the Wavelet Energy (WE) is obtained by calculating the area under the curve along the selected range of scale for each point of the bridge deck. The energy of a healthy bridge is low and flat, whereas for a damaged bridge there is a WE accumulation at the damage location. The Rio Papaloapan Bridge (RPB) is considered for this research and the results obtained numerically and experimentally are very promissory to apply this method and avoid accidents. Full article

Automobile surface defects like scratches or dents occur during the process of manufacturing and cross-border transportation. This will affect consumers’ first impression and the service life of the car itself. In most worldwide automobile industries, the inspection process is mainly performed by human vision, which is unstable and insufficient. The combination of artificial intelligence and the automobile industry shows promise nowadays. However, it is a challenge to inspect such defects in a computer system because of imbalanced illumination, specular highlight reflection, various reflection modes and limited defect features. This paper presents the design and implementation of a novel automatic inspection system (AIS) for automobile surface defects which are the located in or close to style lines, edges and handles. The system consists of image acquisition and image processing devices, operating in a closed environment and noncontact way with four LED light sources. Specifically, we use five plane-array Charge Coupled Device (CCD) cameras to collect images of the five sides of the automobile synchronously. Then the AIS extracts candidate defect regions from the vehicle body image by a multi-scale Hessian matrix fusion method. Finally, candidate defect regions are classified into pseudo-defects, dents and scratches by feature extraction (shape, size, statistics and divergence features) and a support vector machine algorithm. Experimental results demonstrate that automatic inspection system can effectively reduce false detection of pseudo-defects produced by image noise and achieve accuracies of 95.6% in dent defects and 97.1% in scratch defects, which is suitable for customs inspection of imported vehicles. Full article