Search Results (21)

This study investigates the synthesis and characterization of alkyne-based multilayered three-dimensional (3D) polymers, which exhibit a subtle aggregation-induced emission (AIE) phenomenon. The polymers demonstrate significant potential as fluorescent probes for the selective detection of chromium (VI) ions (Cr⁶⁺), showcasing their utility in environmental sensing applications. Additionally, the circular dichroism (CD) spectra reveal a pronounced cotton effect, indicative of chiral properties, while scanning electron microscopy (SEM) and dynamic light scatting (DLS) analysis reveal a distinctive rock-like surface morphology and Cr⁶⁺ sensitive anti-aggregation. These findings highlight the multifunctional capabilities of alkyne-based multilayered 3D polymers, suggesting their applicability in both fluorescence-based sensing and materials science. The insights gained from this research contribute to the development of advanced materials with tailored optical properties for environmental monitoring and other practical applications. Full article

The twist-bend nematic liquid crystal phase is a three-dimensional fluid in which achiral bent molecules spontaneously form an orientationally ordered, macroscopically chiral, heliconical winding of a ten nanometer-scale pitch in the absence of positional ordering. Here, the structure of the twist-bend phase of the bent dimer CB7CB and its mixtures with 5CB is characterized, revealing a hidden invariance of the self-assembly of the twist-bend structure of CB7CB, such that over a wide range of concentrations and temperatures, the helix pitch and cone angle change as if the ground state for a pitch of the TB helix is an inextensible heliconical ribbon along the contour formed by following the local molecular long axis (the director). Remarkably, the distance along the length for a single turn of this helix is given by 2πR_mol, where R_mol is the radius of bend curvature of a single all-trans CB7CB molecule. This relationship emerges from frustrated steric packing due to the bent molecular shape: space in the fluid that is hard to fill attracts the most flexible molecular subcomponents, a theme of nanosegregation that generates self-assembled, oligomer-like correlations of interlocking bent molecules in the form of a brickwork-like tiling of pairs of molecular strands into duplex double-helical chains. At higher temperatures in the twist-bend phase, the cone angle is small, the director contour is nearly along the helix axis z, and the duplex chains are sequences of biaxial elements formed by overlapping half-molecule pairs, with an approximately 45° rotation of the biaxis between each such element along the chain. Full article

Since the discovery of metal-catalyzed azide–alkyne cycloadditions, 1,2,3-triazoles have been widely used as linkers for various residues. 1,2,3-Triazole is an aromatic five-membered cyclic compound consisting of three nitrogen and two carbon atoms with large dipoles that absorb UV light. In the past decade, we have been working on the synthesis of dense triazole polymers possessing many 1,2,3-triazole residues linked through a carbon atom in their backbone as a new type of functional polymer. Recently, we reported that stereoregular dense triazole uniform oligomers exhibit a circular dichroism signal based on the chiral arrangement of two neighboring 1,2,3-triazole residues. In this study, to investigate the chiral conformation of two neighboring 1,2,3-triazole residues in stereoregular dense triazole uniform oligomers, density functional theory (DFT) calculations were performed using 1,2,3-triazole diads with different substitution positions and conformations as model compounds and compared with our previous results. Full article

On-surface polymerization of functional organic molecules has been recently recognized as a promising route to persistent low-dimensional structures with tailorable properties. In this contribution, using the coarse-grained Monte Carlo simulation method, we study the initial stage of the Ullmann coupling of doubly halogenated chrysene isomers adsorbed on a catalytically active (111) crystalline surface. To that end, we focus on the formation of labile metal-organic precursor structures preceding the covalent bonding of chrysene monomers. Four monomeric chrysene units with differently distributed halogen substituents were probed in the simulations, and the resulting precursor structures were compared and quantified. Moreover, the effect of (pro)chirality of chrysene tectons on the structure formation was elucidated by running separate simulations in enantiopure and racemic systems. The calculations showed that suitable manipulation of the halogen substitution pattern allows for the creation of diverse precursor architectures, ranging from straight and winded chains to cyclic oligomers with enantiopure, racemic, and nonracemic composition. The obtained findings can be helpful in developing synthetic strategies for covalent polymers with predefined architecture and functionality. Full article

Iridium-catalyzed azide-thioalkyne cycloaddition reaction (IrAAC) has proved to be a powerful tool for the synthesis of fully substituted 1,2,3-triazole compounds with exclusive regioselectivity. Here we report its successful use in the precise construction of stereocontrolled oligomers that have great potential in diverse applications. Starting with the azide derived from L-prolinol and different functionalized thioalkynes, chiral 1,2,3-triazole units were fabricated with high efficiency under the IrAAC condition, which were further assembled into stereocontrolled oligotriazoles through metal-free exponential growth strategies. The structure and uniformity of these oligomers were well identified by ¹H NMR, size-exclusion chromatography, and mass spectrometry, the stereoregularity of which were studied through circular dichroism and circular polarized luminescence analysis. Full article

The discovery of the twist-bend nematic phase (N_TB) is a milestone within the field of liquid crystals. The N_TB phase has a helical structure, with a repeat length of a few nanometres, and is therefore chiral, even when formed by achiral molecules. The discovery and rush to understand the rich physics of the N_TB phase has provided a fresh impetus to the design and characterisation of dimeric and oligomeric liquid crystalline materials. Now, ten years after the discovery of the N_TB phase, we review developments in this area, focusing on how molecular features relate to the incidence of this phase, noting the progression from simple symmetrical dimeric materials towards complex oligomers, non-covalently bonded supramolecular systems. Full article

Cholesteric liquid crystals (CLCs) are a significant class of temperature-responsive photonic materials that have the ability to selectively reflect light of a specific wavelength. However, the fabrication of main-chain CLC oligomers with dramatic reflection band variation upon varying the temperatures remains a challenge. Here, a feasible method for improving and controlling the responsiveness of main-chain cholesteric liquid crystal oligomers by the incorporation of a smectic monomer is reported. The smectic monomer strengthens the smectic character of the oligomers and enhances the magnitude of the change of the pitch as a function of temperature upon approaching the cholesteric–smectic phase transition temperature. The central wavelength of the reflection band can be easily modified by mixing in an additional chiral dopant. This promising method will open the door to the preparation of temperature-responsive photonic devices with excellent responsiveness. Full article

Ethylene oxide oligomers and polymers, free and tethered to gold nanoparticles, were dispersed in blue phase liquid crystals (BPLC). Gold nanospheres (AuNPs) and nanorods (AuNRs) were functionalized with thiolated ethylene oxide ligands with molecular weights ranging from 200 to 5000 g/mol. The BPLC mixture (ΔT_BP ~6 °C) was based on the mesogenic acid heterodimers, n-hexylbenzoic acid (6BA) and n-trans-butylcyclohexylcarboxylic acid (4-BCHA) with the chiral dopant (R)-2-octyl 4-[4-(hexyloxy)benzoyloxy]benzoate. The lowest molecular weight oligomer lowered and widened the BP range but adding AuNPs functionalized with the same ligand had little effect. Higher concentrations or molecular weights of the ligands, free or tethered to the AuNPs, completely destabilized the BP. Mini-AuNRs functionalized with the same ligands lowered and widened the BP temperature range with longer mini-AuNRs having a larger effect. In contrast to the AuNPs, the mini-AuNRs with the higher molecular weight ligands widened rather than destabilized the BP, though the lowest MW ligand yielded the largest BP range, (ΔT_BP > 13 °C). The different effects on the BP may be due to the AuNPs accumulating at singular defect sites whereas the mini-AuNRs, with diameters smaller than that of the disclination lines, can more efficiently fill in the BP defects. Full article

Optical rotatory dispersion (ORD) is a beautiful analytical technique for the study of chiral molecules and polymers. In this study, ORD was applied successfully to follow the degree of polycondensation of l-(+)-lactic acid toward the formation of poly(lactic acid) oligomers (PLAO) and high molecular weight poly(l-lactic acid) (PLLA) in a simple esterification reaction equipment. PLLA is a biodegradable polymer obtainable from renewable raw materials. The racemization of the intrinsically isotactic PLLA through thermal treatment can be easily followed through the use of ORD spectroscopy. Organic or molecular electronics is a hot topic dealing with the combination of π-conjugated organic compounds and polymers with specific properties (e.g., chirality) which can be exploited to construct optoelectronic devices, such as organic light-emitting diodes (OLEDs), organic photovoltaic (OPV) high efficiency cells, switchable chirality devices, organic field-effect transistors (OFETs), and so on. ORD spectroscopy was applied to study either the gigantic optical rotation of PLLA films, as well as to detect successfully the excitonic coupling, occurring in thin solid PLLA green film loaded with a combination of two dyes: SY96 (a pyrazolone dye) and PB16 (the metal-free phthalocyanine pigment). The latter compound PLLA loaded with SY96 and PB16 shows a really gigantic optical activity in addition to typical ORD signal due to exciton coupling and may be considered as a simple and easily accessible model composite of a chiral polymer matrix combined with π-conjugated dyes for molecular electronics studies. Full article

A voltammetric and scanning electrochemical microscopy (SECM) investigation was performed on an inherently chiral oligomer-coated gold electrode to establish its general properties (i.e., conductivity and topography), as well as its ability to discriminate chiral electroactive probe molecules. The electroactive monomer (S)-2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bibenzothiophene ((S)-BT₂T₄) was employed as reagent to electrodeposit, by cyclic voltammetry, the inherently chiral oligomer film of (S)-BT₂T₄ (oligo-(S)-BT₂T₄) onto the Au electrode surface (resulting in oligo-(S)-BT₂T₄-Au). SECM measurements, performed in either feedback or competition mode, using the redox mediators [Fe(CN)₆]⁴⁻ and [Fe(CN)₆]³⁻ in aqueous solutions, and ferrocene (Fc), (S)-FcEA, (R)-FcEA and rac-FcEA (FcEA is N,N-dimethyl-1-ferrocenylethylamine) in CH₃CN solutions, indicated that the oligomer film, as produced, was uncharged. The use of [Fe(CN)₆]³⁻ allowed establishing that the oligomer film behaved as a porous insulating membrane, presenting a rather rough surface. This was inferred from both the approach curves and linear and bidimensional SECM scans, which displayed negative feedback effects. The oligomer film acquired semiconducting or fully conducting properties when the Au electrode was biased at potential more positive than 0.6 V vs. Ag|AgCl|KCl. Under the latter conditions, the approach curves displayed positive feedback effects. SECM measurements, performed in competition mode, allowed verifying the discriminating ability of the oligo-(S)-BT₂T₄ film towards the (S)-FcEA and (R)-FcEA redox mediators, which confirmed the results obtained by cyclic voltammetry. SECM linear scans indicated that the enantiomeric discriminating ability of the oligo-(S)-BT₂T₄ was even across its entire surface. Full article

The origin of biological homochirality—defined as the preference of biological systems for only one enantiomer—has widespread implications in the study of chemical evolution and the origin of life. The activation—polymerization—epimerization—depolymerization (APED) model is a theoretical model originally proposed to describe chiral symmetry breaking in a simple dimerization system. It is known that the model produces chiral and chemical oscillations for certain system parameters, in particular, the preferential formation of heterochiral polymers. In order to investigate the effect of higher oligomers, our model adds trimers, tetramers, and pentamers. We report sustained oscillations of all chemical species and the enantiomeric excess for a wide range of parameter sets as well as the periodic chiral amplification of a small initial enantiomeric excess to a nearly homochiral state. Full article

Temperature-responsive photonic coatings are appealing for a variety of applications, including smart windows. However, the fabrication of such reflective polymer coatings remains a challenge. In this work, we report the development of a temperature-responsive, infrared-reflective coating consisting of a polymer-stabilized cholesteric liquid crystal siloxane, applied by a simple bar coating method. First, a side-chain liquid crystal oligosiloxane containing acrylate, chiral and mesogenic moieties was successfully synthesized via multiple steps, including preparing precursors, hydrosilylation, deprotection, and esterification reactions. Products of all the steps were fully characterized revealing a chain extension during the deprotection step. Subsequently, the photonic coating was fabricated by bar-coating the cholesteric liquid crystal oligomer on glass, using a mediator liquid crystalline molecule. After the UV-curing and removal of the mediator, a transparent IR reflective polymer-stabilized cholesteric liquid crystal coating was obtained. Notably, this fully cured, partially crosslinked transparent polymer coating retained temperature responsiveness due to the presence of non-reactive liquid-crystal oligosiloxanes. Upon increasing the temperature from room temperature, the polymer-stabilized cholesteric liquid crystal coating showed a continuous blue-shift of the reflection band from 1400 nm to 800 nm, and the shift was fully reversible. Full article

The development of peptidomimetic foldamers that can form well-defined folded structures is highly desirable yet challenging. We previously reported on α-ABpeptoids, oligomers of N-alkylated β²-homoalanines and found that due to the presence of chiral methyl groups at α-positions, α-ABpeptoids were shown to adopt folding conformations. Here, we report β-ABpeptoids having chiral methyl group at β-positions rather than α-positions as a different class of peptoids with backbone chirality. We developed a facile solid-phase synthetic route that enables the synthesis of β-ABpeptoid oligomers ranging from 2-mer to 8-mer in excellent yields. These oligomers were shown to adopt ordered folding conformations based on circular dichroism (CD) and NMR studies. Overall, these results suggest that β-ABpeptoids represent a novel class of peptidomimetic foldamers that will find a wide range of applications in biomedical and material sciences. Full article

This paper reports on synthesis, acid-base properties and self-structuring in water of chiral polyamidoamino acids (PAACs) obtained by polyaddition of N,N′-methylenebisacrylamide with l-alanine, l-valine and l-leucine (M-l-Ala, M-l-Val, M-l-Leu) with potential for selective interactions with biomolecules. The polymers maintained the acid-base properties of amino acids. In water, the circular dichroism spectra of PAACs revealed pH-dependent structuring in the range 3–11 and in the wavelength interval 200–280 nm. Taking as reference the values at pH 3, the differential molar ellipticities were plotted in the pH interval 3–11. Sigmoidal curves were obtained presenting inflection points at pH 8.1, 6.8 and 7.3 for M-l-Ala, M-l-Val and M-l-Leu, respectively, corresponding to the amine half-ionization. Theoretical modeling showed that PAACs assumed stable folded conformations. Intramolecular interactions led to transoid arrangements of the main chain reminiscent of protein hairpin motif. Oligomers with ten repeat units had simulated gyration radii consistent with the hydrodynamic radii obtained by dynamic light scattering. Full article

Chiral cylindrical molecular complexes of homo- and hetero-double-helices derived from helicene oligomers self-assemble in solution, providing functional heterogeneous liquid-solid materials. Gels and liotropic liquid crystals are formed by fibril self-assembly in solution; molecular monolayers and fibril films are formed by self-assembly on solid surfaces; gels containing gold nanoparticles emit light; silica nanoparticles aggregate and adsorb double-helices. Notable dynamics appears during self-assembly, including multistep self-assembly, solid surface catalyzed double-helix formation, sigmoidal and stairwise kinetics, molecular recognition of nanoparticles, discontinuous self-assembly, materials clocking, chiral symmetry breaking and homogeneous-heterogeneous transitions. These phenomena are derived from strong intercomplex interactions of chiral cylindrical molecular complexes. Full article