Search Results (6)

In this study, we report the design, synthesis, and catalytic application of the novel nitrogen-rich Zn(II) MOF [Zn₂(μ₃-1κN,2κN′,3κO-HL)₂(DMF)₂]_n·nH₂O (HL²⁻ = 4-((4-(1H-tetrazol-5-yl)phenyl)carbamoyl)benzoate), denoted as ZnMOF, for the efficient conversion of carbon dioxide (CO₂) to cyclic carbonates via cycloaddition with epoxides. It was synthesised from a tetrazole appended amide-functionalised pro-ligand (H₃L) and Zn(NO₃)₂·6H₂O under hydrothermal conditions. The synthesised material was characterised namely by elemental analysis, infrared spectroscopy, powder X-ray diffraction (PXRD), and single-crystal X-ray diffraction analyses. The catalytic potential of ZnMOF was investigated in the CO₂ cycloaddition reaction with various epoxides, with conversions ranging from 17% to 99%. The catalyst retained its activity across multiple reaction cycles, demonstrating its stability and reusability. The influence of co-catalysts on the reaction was explored, with tetrabutylammonium bromide (TBABr) emerging as the most effective one. A plausible reaction mechanism is proposed. Full article

In recent years, Web of Science has published nearly one hundred reports per year on quinoxalin-2(1H)-ones, which have attracted great interest due to their wide applications in pharmaceutical and materials fields, especially in recyclable heterogeneous catalytic reactions for direct C–H functionalisation. This review summarises for the first time the methods and reaction mechanisms of heterogeneous catalytic reactions of quinoxalin-2(1H)-ones, including six major types of heterogeneous catalysts involved. The heterogeneous reactions of quinoxalin-2(1H)-ones are summarised by classifying different types of catalytic materials (graphitic phase carbon nitride, MOF, COF, ion exchange resin, piezoelectric materials, and microsphere catalysis). In addition, this review discusses the future development of heterogeneous catalytic reactions of quinoxalin-2(1H)-ones, including the construction of C-B/Si/P/R_F/X/Se bonds by heterogeneous catalytic reactions, the enrichment of heterogeneous catalysts such as metal oxides, graphene-based composites, doped metal nanoparticles, and molecular sieve-based porous materials, asymmetric synthesis, and other areas. The aim of this review is to contribute to the development of green and sustainable heterogeneous reaction methods for quinoxalin-2(1H)-ones with applications in materials chemistry and pharmacology. Full article

Swift developments in electronic devices and future transportation/energy production directions have forced researchers to develop new and contemporary devices with higher power capacities, extended cycle lives, and superior energy densities. Supercapacitors are promising devices with excellent power densities and exceptionally long cycle lives. However, commercially available supercapacitors, which commonly use high-surface-area carbon-based electrodes and organic solutions as electrolytes, suffer from inferior energy densities due to the limited accessibility of surface area and constrained operating potential window of electrolytes. To address the issue of inferior energy densities, new high-capacity electrode materials and new/state-of-the-art electrolytes, such as ionic liquids, gel polymers, or even solid-state electrolytes, have been developed and evaluated vigorously in recent years. In this brief review, different types of supercapacitors, according to their charge storage mechanisms, have been discussed in detail. Since carbon-based active materials are the key focus of this review, synthesis parameters, such as carbonisation, activation, and functionalisation, which can impact a material’s physiochemical characteristics, ultimately affecting the performance of supercapacitors, are also discussed. Finally, the synthesis and applications of different carbon-based materials, i.e., carbon nanotubes, graphene, and activated carbon, have been reviewed, followed by conclusions and outlook. Full article

As novel fluorescent nanomaterials, carbon dots have attracted increasing research attention because of their simple synthesis, robust fluorescence, low toxicity, and easy functionalisation. Previous research was focused on preparing carbon dots from biomass and chemical materials; however, most of these carbon dots exhibited blue fluorescence. Moreover, the fluorescence quantum yield was generally low, significantly limiting their application in biological imaging. To broaden the application scope of carbon dots, this study prepared long-wavelength emitting nano-carbon dots that exhibited increased quantum yield. Novel N-doped yellow fluorescent nano-carbon dots (Y-CDs) were synthesised via a hydrothermal method using L-tartaric acid and urea as the precursors. The Y-CDs had a high quantum yield (15.9%) and demonstrated photostability at various pHs, temperatures, and ionic strengths. The Y-CDs could detect cobalamin effectively and selectively, showing a linear relationship between fluorescence intensity and cobalamin concentration. The related coefficient was 0.997, and the detection limit was 2.101 μmol/L. In addition, the Y-CDs were successfully used as an imaging probe for MDA-MB-231 cells. Therefore, the Y-CDs developed in this study can be used for cobalamin detection and cell imaging. Full article

In this work, we report the synthesis and study of nanocomposites with a biobased epoxy/amine (Epilok 60-600G/Curamine 30-952) matrix reinforced with reduced graphene oxide (rGO) or functionalised with 3-glycidoxypropyltrimethoxysilane (GLYMO-rGO). These graphene related materials (GRMs) were first dispersed into a Curamine hardener using bath ultrasonication, followed by the addition of epoxy resin. Curing kinetics were studied by DSC under non-isothermal and isothermal conditions. The addition of 1.5 wt% of GLYMO-rGO into the epoxy matrix was found to increase the degree of cure by up to 12% and glass transition temperature by 14 °C. Mechanical testing showed that the addition of 0.05 wt% GLYMO-rGO improves Young’s modulus and tensile strength by 60% and 16%, respectively, compared to neat epoxy. Carbon fibre reinforced polymer (CFRP) laminates were prepared via hand lay up, using the nanocomposite system GRM/Epilok/Curamine as matrix, and were cut as CFRP adherents for lap shear joints. GRM/Epilok/Curamine was also used as adhesive to bond CFRP/CFRP and CFRP/aluminium adherents. The addition of 0.1 wt% GLYMO-rGO into the adhesive and CRFP adherents showed improved lap shear strength by 23.6% compared to neat resin, while in the case of CFRP/Aluminium joints the increase was 21.2%. Full article

The adoption of green technology is very important to protect the environment and thus there is a need for improving the existing methods for the fabrication of carbon materials. As such, this work proposes to discuss, interrogate, and propose viable hydrothermal, solvothermal, and other advanced carbon materials synthesis methods. The synthesis approaches for advanced carbon materials to be interrogated will include the synthesis of carbon dots, carbon nanotubes, nitrogen/titania-doped carbons, graphene quantum dots, and their nanocomposites with solid/polymeric/metal oxide supports. This will be performed with a particular focus on microwave-assisted solvothermal and hydrothermal synthesis due to their favourable properties such as rapidity, low cost, and being green/environmentally friendly. These methods are regarded as important for the current and future synthesis and modification of advanced carbon materials for application in energy, gas separation, sensing, and water treatment. Simultaneously, the work will take cognisance of methods reducing the fabrication costs and environmental impact while enhancing the properties as a direct result of the synthesis methods. As a direct result, the expectation is to impart a significant contribution to the scientific body of work regarding the improvement of the said fabrication methods. Full article