Search Results (156)

Introduction: Despite clinical evidence for efficacy, there has been minimal uptake of transcranial direct current stimulation (tDCS) for musculoskeletal conditions. Thus, our objective was to explore the perceptions and experiences of people living with lower-limb musculoskeletal injury as well as healthy physically active populations and relate this to the usage of tDCS and key aspects of tDCS design that would improve the capacity for implementation. Methods: We conducted a qualitative descriptive study of 16 participants (44% women) using semi-structured focus groups to identify the descriptions and experiences of people living with lower-limb musculoskeletal injury and healthy physically active populations. A thematic template was used to create a coding structure. Codes were then grouped, and key themes were derived from the data. Results: Four primary themes were identified from focus groups. These were (i) the impact of musculoskeletal injuries on health and quality of life, (ii) performance and injury recovery as facilitators to using tDCS, (iii) barriers and facilitators to tCDS application and (iv) design and aesthetic factors for a tDCS device. Discussion: Our qualitative descriptive study identified four themes relevant to the successful implementation of tDCS into rehabilitative and performance practice. To increase the likelihood of successful tDCS implementation, these barriers should be addressed and facilitators promoted. This should include innovative approaches to device application and structure that allow for a stylish, user-friendly design. Full article

The integration of artificial intelligence (AI) and advanced digital workflows is revolutionising full-arch implant dentistry, particularly for geriatric patients with edentulous and atrophic arches, for whom achieving both prosthetic passivity and optimal aesthetic outcomes is critical. This narrative review evaluates current challenges in intraoral scanning accuracy—such as scan distortion, angular deviation, and cross-arch misalignment—and presents how innovations like the Medit SmartX AI-guided workflow and the Scan Ladder system can significantly enhance precision in implant position registration. These technologies mitigate stitching errors by using real-time scan body recognition and auxiliary geometric references, yielding mean RMS trueness values as low as 11–13 µm, comparable to dedicated photogrammetry systems. AI-driven prosthetic design further aligns implant-supported restorations with facial symmetry and smile aesthetics, prioritising predictable midline and occlusal plane control. Early clinical data indicate that such tools can reduce prosthetic misfits to under 20 µm and lower complication rates related to passive fit, while shortening scan times by up to 30% compared to conventional workflows. This is especially valuable for elderly individuals who may not tolerate multiple lengthy adjustments. Additionally, emerging AI applications in design automation, scan validation, and patient-specific workflow adaptation continue to evolve, supporting more efficient and personalised digital prosthodontics. In summary, AI-enhanced scanning and prosthetic workflows do not merely meet functional demands but also elevate aesthetic standards in complex full-arch rehabilitations. The synergy of AI and digital dentistry presents a transformative opportunity to consistently deliver superior precision, passivity, and facial harmony for edentulous implant patients. Full article

Background and Clinical Significance: Juvenile ossifying fibroma (JOF) is a rare, benign, but locally aggressive fibro-osseous neoplasm that primarily affects the craniofacial skeleton of children and adolescents. Early surgical intervention is often required due to the lesion’s rapid growth and potential for significant facial deformity. Long-term functional and esthetic rehabilitation following maxillary resection in early childhood remains a clinical challenge. Case Presentation: This case reports a unique long-term follow-up of a 22-year-old female patient who underwent partial maxillary resection at the age of five due to JOF. Initial reconstructive efforts failed, necessitating a removable prosthesis to restore function and appearance. The patient experienced persistent self-consciousness and social withdrawal during adolescence, attributed to altered facial esthetics and repeated surgical disappointment. Nevertheless, prosthetic rehabilitation significantly improved mastication, phonetics, facial symmetry, and psychological well-being. Conclusions: The enduring psychosocial and functional impact of early maxillary resection for JOF and the pivotal role of prosthodontic management in long term rehabilitation are highlighted. A multidisciplinary approach that includes psychological support is suggested. This case report is among the few reports documenting long-term prosthetic outcomes for pediatric JOF patients extending into adulthood. Full article

Background and Clinical Significance: The retreatment of failed dental implants remains a challenging clinical scenario, particularly when complicated by peri-implantitis and as sociated bone loss. Successful management requires a comprehensive and predictable approach that addresses both hard and soft tissue deficiencies. Case Presentation: This case report illustrates a fully digital, prosthetically driven workflow for the rehabilitation of a posterior mandibular site following implant failure. A 44-year-old female patient underwent removal of a failing implant and adjacent tooth due to advanced peri-implantitis and periodontitis. After healing, a digital workflow—including intraoral scanning, cone-beam computed tomography (CBCT), and virtual planning—was employed to design and fabricate a customized CAD/CAM titanium mesh for vertical guided bone regeneration. The grafting procedure utilized a composite mixture of autogenous bone and anorganic bovine bone (A-Oss). After nine months of healing, two implants with a hydrophilic surface (SOI) were placed using a fully guided surgical protocol (OneGuide system). Subsequent soft tissue grafting and final prosthetic rehabilitation with monolithic zirconia restorations resulted in stable functional and aesthetic outcomes. Conclusions: This case highlights how the integration of modern digital technologies with advanced regenerative procedures and innovative implant surfaces can enhance the predictability and long-term success of implant retreatment in compromised posterior sites. Full article

Background and Clinical Significance: Prosthetic rehabilitation in the aesthetic zone of periodontally compromised patients presents a complex clinical challenge, requiring a careful coordination of aesthetic, functional, and biological demands. This case highlights the benefits of digital dentistry, interdisciplinary collaboration, and regular maintenance in achieving long-term success in complex rehabilitations of periodontally compromised patients. Case Presentation: This case report describes the digital minimally invasive rehabilitation of a 39-year-old male patient with Stage III periodontitis, occlusal discrepancies, tooth mobility, and an interincisal diastema. A fully digital workflow—including intraoral scanning, aesthetic previewing, and mandibular motion analysis—was employed to guide diagnosis, treatment planning, and prosthetic execution. Conservative tooth preparations using a biologically oriented approach (BOPT) were combined with customised provisional restorations to support soft tissue conditioning and functional control throughout the provisional phases. Mandibular motion tracking facilitated the design of a personalised anterior guidance to improve occlusion and correct the deep bite. The interincisal diastema was initially maintained then closed during the advanced phase of treatment based on aesthetic simulations and patient preference. One unplanned endodontic treatment was required during the provisional phase, but no other complications occurred. Conclusions: At the four-year follow-up, the patient demonstrated stable periodontal and occlusal conditions, improved clinical indices, and high satisfaction with the aesthetic outcome. Full article

Background: In recent years, thanks to the improvement of adhesive techniques, patients affected by tooth wear, related to erosion and/or parafunctional habits, can undergo restoration by adding only what has been lost of their dentition (additive approach). However, since not all clinicians are convinced that dental rehabilitation should be proposed in the early stages of exposed dentin, several treatments are often postponed. It is important to emphasize that, in the early stages, the clinical approach should remain conservative, focusing on dietary counseling, the modification of harmful habits, fluoride application, and risk factor management. Only when these preventive and non-invasive strategies prove insufficient, and the condition continues to progress, should invasive restorative treatments be considered. Unfortunately, epidemiological studies are reporting an increase in the number of young patients affected by erosive tooth wear, and not intercepting these cases earlier could lead to a severe degradation of the affected dentition. In addition, parafunctional habits are also becoming more frequent among patients. The combination of erosion and attrition can be very destructive, and may progress rapidly once dentin is exposed and the risk factors remain unaddressed. The aim of this report was to present a conservative full-mouth rehabilitation approach for severe erosive lesions and to provide a 10-year follow-up assessing the biological, functional, and esthetic outcomes. Methods: In this article, the postponed restorative treatment of a patient, suffering from severe tooth wear, is illustrated. The patient had sought dental treatment in the past; however, due to the already very compromised dentition, a conventional but very aggressive treatment was proposed and refused. Four years later, when the patient finally accepted an alternative conservative therapy, the tooth degradation was very severe, especially at the level of the maxillary anterior teeth. The combination of three different approaches, Speed-Up Therapy, BOPT (Biologically-Oriented Preparation Technique), and the 3 Step Technique, however, improved the capacity to successfully complete the difficult therapeutic task. Results: The biological goals (maintenance of the pulp vitality of all of the teeth and the minimal removal of healthy tooth structure) were accomplished, relying only on adhesive techniques. Conclusions: The overall treatment was very comfortable for the patient and less complicated for the clinician. At 10-year follow-up, biological, functional, and esthetic success was still confirmed. Full article

Background: The rehabilitation of complex bone defects in the anterior maxilla presents significant challenges in restoring both function and esthetics. A multidisciplinary approach integrating guided bone regeneration (GBR) and connective tissue grafting (CTG) has proven effective in addressing such cases. Methods: This report describes the case of a 60-year-old female patient who presented with severe alveolar ridge resorption and peri-implant bone loss, necessitating an advanced regenerative strategy. The treatment protocol involved the use of autologous and xenogeneic bone grafts in combination with hyaluronic acid and polynucleotides to enhance osteogenesis and tissue integration. A six-month healing period was observed before histological and clinical evaluations were conducted. Results: The results demonstrated a significant increase in lamellar bone formation and vascularization in sites treated with biomodulators compared to conventional GBR techniques. Subsequently, CTG was employed to optimize peri-implant soft tissue volume and stability, leading to improved keratinized tissue thickness and enhanced esthetic outcomes. This case underscores the importance of a comprehensive surgical and prosthetic plan that integrates bone regeneration with mucogingival management for optimal results in implant rehabilitation. Additionally, histological analysis revealed that the incorporation of hyaluronic acid and polynucleotides resulted in improved cellular activity, reduced inflammatory responses, and enhanced overall bone quality. Conclusions: These results highlight the potential role of biomodulators in regenerative procedures. While the findings suggest promising clinical applications, further long-term studies are necessary to validate the outcomes and establish standardized protocols for the integration of advanced biomaterials in implantology. Full article

Background/Objectives: Jaw deformities affect not only facial aesthetics but also various oral functions. While previous studies have demonstrated that mandibular prognathism (MP) alters masticatory-induced brain blood flow (BBF), the temporal characteristics of these hemodynamic changes have remained unclear. In this cross-sectional observational study, we investigated the following two specific objectives: (1) whether food hardness affects not only the magnitude but also the temporal patterns of BBF changes during mastication and (2) how malocclusion is associated with these temporal hemodynamic responses. Methods: Twenty-six participants with normal occlusion (NORM) and twenty patients with MP participated in this study. BBF was measured using functional near-infrared spectroscopy, while participants chewed soft paraffin or hard gummy candy. Maximum oxygenated hemoglobin (oxy-Hb) values and time-to-peak BBF were analyzed. Results: While food hardness did not significantly affect maximum oxy-Hb within groups, the MP group showed significantly lower responses during hard gummy candy mastication compared to the NORM group. The occlusal contact area exhibited significant positive correlation with maximum oxy-Hb values, while the ANB angle, an indicator of intermaxillary skeletal relationship, showed no significant correlation with BBF parameters. The hard gummy candy/paraffin ratio of maximum oxy-Hb was significantly higher in the NORM group compared to the MP group. Time-to-peak BBF was approximately twice as long for hard gummy candy compared to paraffin in both groups, with no significant differences between groups. Conclusions: These findings reveal that while MP attenuates the magnitude of masticatory-induced BBF, particularly during hard food mastication, the temporal adaptation to increased food hardness is preserved. This dissociation between magnitude and timing effects suggests that intact basic neurovascular coupling mechanisms would be maintained even in the condition of altered masticatory function in a MP subject, which is providing new insights for rehabilitation strategies in orthognathic surgery cases. Full article

Background/Objectives: Edentulism is a significant public health concern, particularly among aging populations, affecting oral functionality, aesthetics, and overall health. This study assessed the edentulism status of patients at the Prosthodontic Clinic of Cluj-Napoca, Romania, and explored the possible correlations with socioeconomic factors such as age, general health, smoking, and alcohol consumption. This study aimed to inform public health strategies to reduce edentulism incidence and improve overall oral health outcomes in Romania. Methods: The current study included 208 patients (127 females and 81 males). Each participant completed a standardized data collection form designed to gather comprehensive information on socio-demographic characteristics (including age, gender, and environmental origin), self-reported general health, and lifestyle habits related to smoking and alcohol consumption. The clinical examination was performed by the same operator, recording the odontal and periodontal status, as well as prosthodontic evaluation (including Kennedy class). Results: Findings indicated that female patients had more frequent class 3 and complete edentulism in the maxilla, while males predominantly presented class 3 in the maxilla and class 1 in the mandible. The age distribution revealed that patients aged 20–40 exhibited the highest prevalence of Kennedy class 3, while those over 60 showed a notable increase in complete edentulism (p < 0.05). Although most patients were from urban areas, no significant difference was found between origin and edentulism class. A significant link between alcoholism and mandibular edentulism was also identified (p < 0.05). Conclusions: Edentulism tends to progress with advancing age, often leading to more extensive tooth loss and the need for comprehensive dental rehabilitation. The condition is closely linked to general health status, highlighting its relevance as a potential indicator of systemic health risks. Lifestyle factors, particularly smoking and alcoholism, appear to contribute significantly to the deterioration of oral health, underscoring the importance of preventive strategies and early intervention. Full article

Background: As the rehabilitation of the upper anterior maxilla primarily requires high predictability of successful aesthetic outcomes, procedures of immediate implant placement are frequently employed. The aim of this pilot study was to retrospectively evaluate the short-term outcomes of a protocol of immediate implant placement in fresh extraction sockets, followed by immediate non-functional provisional restorations. Methods: Patients were treated for the replacement of maxillary central or lateral incisors, or cuspid teeth with a single-crown locking-taper implant. Clinical and photographic records were retrospectively compared between the teeth prior to extraction (T0) and restorations one year after prosthetic loading (T1). Outcomes were analyzed using the Pink Esthetic Score (PES), according to the patient’s phenotype (thin/thick), with or without the use of connective tissue graft (CTG). Results: The overall mean PES of 25 implants treated was 9.24 ± 2.36 at T0 and 9.60 ± 1.70 at T1. Comparison of groups between T0 and T1 revealed significant PES variations (p = 0.04), with the best and the worst scores, respectively, registered for thin + CTG group (from 7.50 ± 1.91 to 9.75 ± 2.87) and thin group (from 11.33 ± 2.33 to 10 ± 0.89); moderate increases were assessed for thick group (from 8.44 ± 2.40 to 9.44 ± 2.12) and thick + CTG group (from 9.50 ± 1.04 to 9.33 ± 0.81). Conclusions: Within the limits of a short-term analysis of a small number of patients, immediate implant rehabilitation for aesthetic areas of the upper maxilla can be assumed as a safe and predictable protocol. Concomitant use of CTG seems to provide beneficial effects in thin phenotypes, not any additional value in thick phenotypes. Full article

Background/Objectives: The satisfaction of patients following maxillary full-arch rehabilitation is crucial in assessing treatment effectiveness. This one-year study evaluated patients’ satisfaction, quality of life, and aesthetic perception after receiving the Maxilla-for-All^®/All-On-X treatments, which combine standard, pterygoid, trans-sinus, and zygomatic implants to support a fixed prosthesis and offer a graftless solution that reduces morbidity and treatment time. Methods: A prospective cohort study using convenience sampling of subjects treated for severe maxillary atrophies was conducted on patients receiving immediate implant-supported full-arch fixed prostheses. The Oral Health Impact Profile (OHIP-14) and Psychosocial Impact of Dental Aesthetics Questionnaire (PIDAQ-23) were administered preoperatively and one year post-treatment. Patients were grouped based on the presence or absence of complications (surgical, technical, and mechanical) and Wilcoxon tests were used for comparison (significance level = 0.05). Results: A total of 56 patients (29 female, 27 male) participated, with no implant or prosthesis failures. Eleven patients reported unilateral sinus membrane perforation, and seven had technical or mechanical complications. Preoperatively, 69% of patients rated their oral condition as unfavorable according to the OHIP-14; this dropped significantly to 21.8% post-treatment (p-value < 0.0001). After one year, the average PIDAQ-23 score improved significantly from 44.7 ± 16.6 to 6.8 ± 5.3 (p-value < 0.0001). No significant differences were observed between patients with or without complications (p-values ranging from 0.5270 to 0.8920). Conclusions: Full-arch rehabilitation using Maxilla-for-All^®/All-On-X treatments significantly improved both aesthetic perception and chewing function in patients with severe maxillary atrophies. They reported a substantial reduction in oral health-related discomfort, as shown by a significant decrease in OHIP-14 scores one year post-treatment. Clinical or technical complications did not significantly impact patients’ quality-of-life outcomes or satisfaction, supporting the reliability of this treatment protocol. Full article

Background/Objectives: This systematic review and meta-analysis evaluates the surgical, functional, and aesthetic outcomes of scapular free flaps in maxillary reconstruction. The primary objective is to assess early surgical complications, fistula formation, donor site morbidity, dental restoration, normal dietary intake, aesthetic compromise, and eye-related issues. Secondary objectives include total free flap necrosis, the need for revision procedures, and functional performance of the upper limb. Methods: A systematic review was conducted following the PRISMA guidelines. Eligible studies were identified by searching PubMed/MEDLINE, Cochrane Library, Scopus, and Google Scholar, with the last search conducted on 10th February 2025. Inclusion criteria were studies reporting on patients undergoing maxillary reconstruction with scapular free flaps, and which provided data on at least one of the primary or secondary outcomes. A single-arm meta-analysis was performed to assess the outcomes of scapular free flap reconstruction. The risk of bias was assessed using the Newcastle–Ottawa Quality Assessment Scale, with two independent reviewers performing the assessment. Results: From an initial search of 310 articles, 6 studies were included in the qualitative and quantitative synthesis, encompassing 231 patients with a mean age of 52.9 years (95% CI 44.9–60.8). Early general surgical complications occurred in 24% (95% CI 13–40) of patients, while 12% (95% CI 4–31) experienced fistula formation. Donor site morbidity was reported in 10% (95% CI 6–17) of cases, with a mean DASH score of 10.49, indicating low upper limb impairment. Dental rehabilitation was achieved in 56% (95% CI 42–70), and 52% (95% CI 31–72) of patients resumed a normal diet. Aesthetic compromise was observed in 27% (95% CI 9–58), and 36% (95% CI 28–44) reported eye-related issues. Conclusions: Scapular free flap is a reliable option for maxillary reconstruction with favourable outcomes, particularly in complex composite defects requiring both bone and soft tissue reconstruction. However, the evidence is limited by risk of bias, significant heterogeneity, and imprecision due to the small number of studies and participants. Larger, more robust trials are needed to confirm these findings. Full article

Background/Objective: Diagnostic trial restorations play a crucial role in restorative dentistry by allowing clinicians to evaluate aesthetics, function, and phonetics before finalizing definitive restorations. These restorations facilitate communication between patients, clinicians, and dental technicians, ensuring treatment alignment and predictable outcomes. The accuracy of transferring diagnostic trial restorations to the oral cavity is essential to maintain the integrity of the planned design. Various fabrication techniques, including conventional silicone matrices and computer-aided design/computer-aided manufacturing (CAD-CAM)-based methods, have been developed to improve transfer precision. However, there is limited evidence directly comparing their dimensional accuracy. This randomized in vivo study aimed to evaluate and compare the accuracy of four commonly used techniques—condensation silicone, addition PVS silicone, transparent PVS silicone, and CAD-CAM combination matrices—by assessing their linear and volumetric discrepancies. Methods: Twenty patients requiring aesthetic rehabilitation of their anterior maxillary teeth participated. The sequence of matrix usage was determined through randomization. Four techniques for transferring diagnostic trial restorations were evaluated: (1) condensation silicone matrix, (2) addition polyvinyl siloxane (PVS) silicone matrix, (3) transparent PVS silicone matrix, and (4) CAD-CAM combination matrix. Dimensional accuracy was assessed by comparing intraoral scans (IOSs) of the transferred restorations to the original diagnostic wax-up. Linear discrepancies were measured at four buccal landmarks (cervical, medial, lower medial, and incisal), and volumetric deviation was evaluated using reverse engineering alignment software. Results: Significant differences were observed among the groups in both linear and volumetric discrepancies (p < 0.05). The CAD-CAM combination matrix showed superior volumetric accuracy, with minimal deviations from the diagnostic wax-up. The addition PVS silicone matrix demonstrated consistent linear accuracy, particularly at the cervical and medial landmarks. The condensation silicone matrix exhibited moderate performance across both linear and volumetric accuracy. The transparent PVS silicone matrix showed the highest variability, with greater volumetric deviations. Conclusions: The study highlights that the choice of matrix material and technique significantly impacts the dimensional accuracy of diagnostic trial restoration transfers. The CAD-CAM combination matrix and the addition PVS silicone matrix demonstrated superior advantages compared to the other techniques. Clinicians should consider the specific requirements of each case, including accuracy and ease of use, when selecting a transfer technique for aesthetic rehabilitations. Full article

Recent technological advances have introduced novel therapeutic interventions for Alzheimer’s disease (AD). This study introduces a novel virtual reality (VR) intervention consisting of aesthetically pleasing and relaxing immersive videos paired with evocative music for patients with or without cognitive decline. The goal of this intervention is to improve the mood, evoke autobiographical memories in, and enhance the overall well-being of elderly individuals, across stages of cognitive decline (from absent to severe). Twenty-one elderly participants (5 cognitively healthy, 13 with a mild cognitive decline, 2 with a moderate decline, and 1 with a severe decline) were exposed to immersive 360-degree videos depicting both familiar and unfamiliar, pleasant and calming environments, accompanied by emotionally evocative, pleasant, and soothing music. The results demonstrated high levels of immersion and predominantly positive emotional responses, with several participants reporting autobiographical memory recall triggered by the VR stimulation. Statistical analysis revealed a significant improvement in mood over time, regardless of cognitive status, supporting the effectiveness of the intervention. While there were some side effects of fatigue or transient anxiety, the experience was generally perceived as engaging and meaningful. This feasibility study adds to the acceptability and potential clinical utility of VR interventions and provides a justification for future larger trials aimed at the integration of immersive technologies into cognitive rehabilitation interventions for individuals at different stages of cognitive decline. Full article

The classical approach for the preparation of an endodontically treated molar with a post and core involves widening the anatomically complex system of canals, which may be narrow or curved with variable angulation. The aforementioned along with the fact that restorative dentistry stands against the wastage of tooth tissue make endocrowns an appealing alternative. Bindl and Mörmann first described an all-ceramic crown anchored to the internal portion of the pulp chamber and on the cavity margins, thus obtaining macromechanical retention provided by the axial opposing pulpal walls and microretention attained with the use of adhesive cementation. The purpose of this report is to describe the protocol for the treatment plan selection, preparation, impression, and adhesive cementation of an endocrown with a follow-up of 5 years. A 56-year-old male patient presented to the Postgraduate Clinic of Prosthodontics seeking rehabilitation for tooth No. #36. A clinical examination revealed multiple immediate composite resin restorations with unacceptable morphology and adaptation to the remaining tooth as well as a lack of a contact point but, rather, a large, concave contact area facilitating food entrapment. Since the tooth was endodontically treated, the proposed treatment plan included the fabrication of an all-ceramic endocrown. The steps of preparation, attribution of the correct shape, impression, and adhesive luting under rubber dam isolation are thoroughly described. The final functional and aesthetic result, patient’s satisfaction, and the 5-year follow-up render restorations such as endocrowns, which draw their retention from adhesive luting, a viable alternative to conventional approaches. Full article