Search Results (9)

With the advancement of artificial intelligence, the inference capabilities of Autonomous Underwater Vehicles (AUVs) have significantly improved, leading to growing interest in AUV applications. To ensure reliable operations, the field of underwater communications demands robust schemes that account for AUV mobility and enable the formation of underwater cellular networks. Conventional approaches using Linear Frequency Modulation (LFM) and Zadoff–Chu sequence (ZCS) sequences for frame detection and Cell ID (CID) assignment degrade substantially under severe Doppler conditions. In particular, AUVs experience pronounced Doppler shifts due to their mobility in underwater channels. In this study, we propose a methodology in which distinct Superimposed Adjusted-HFM (SA-HFM) signals are assigned to multiple buoys, allowing AUVs to jointly perform frame detection, CID assignment, and Doppler estimation in challenging underwater environments. To validate the proposed scheme, an ocean experiment was conducted in the East Sea of the Republic of Korea. The results demonstrate that the SA-HFM-based signals successfully achieved frame detection, CID assignment, and Doppler estimation at distances ranging from 500 m to approximately 2 km, even when the AUV moved at speeds of 1.02–1.54 m/s. The experimental results indicate that the proposed approach can offer robust underwater communication and facilitate the deployment of underwater cellular networks for mobile AUV operations. Full article

In underwater communications for 6G, Doppler effects cause the coherent time to become similar to or shorter than the orthogonal frequency division multiplexing (OFDM) symbol length. Conventional time and frequency synchronization methods require additional training symbols for synchronization, which reduces the traffic data rate. This paper proposes the Zadoff–Chu sequence (ZCS) pilot-based OFDM for time and frequency synchronization. The proposed method transmits ZCS as a pilot for OFDM symbols and simultaneously transmits traffic data to increase the traffic data rate while estimating the CFO at each coherence time. For time–frequency synchronization, the correlation of the ZCS pilot is used to perform coarse and fine time and frequency synchronization in two stages. Since the traffic data cause interference with the correlation of ZCS pilots, we theoretically analyzed the relationship between the amount of traffic data and interference and verified it through computer simulations. The synchronization and BER performance of the proposed ZCS pilot-based OFDM were evaluated by conduction computer simulations and a practical ocean experiment. Compared to the methods of Ren, Yang, and Avrashi, the proposed method demonstrated a 6.3% to 14.3% increase in traffic data rate with similar BER performance and a 2 dB to 3.8 dB SNR gain for a 14.3% to 23.8% decrease in traffic data rate. Full article

Since orthogonal frequency division multiplexing (OFDM) systems are very susceptible to symbol timing offset (STO) and carrier frequency offset (CFO), which cause inter-symbol interference (ISI) and inter-carrier interference (ICI), accurate STO and CFO estimations are very important. In this study, first, a new preamble structure based on the Zadoff–Chu (ZC) sequences was designed. On this basis, we proposed a new timing synchronization algorithm, called the continuous correlation peak detection (CCPD) algorithm, and its improved algorithm: the accumulated correlation peak detection (ACPD) algorithm. Next, the correlation peaks that were obtained during the timing synchronization were used for the frequency offset estimation. For this, the quadratic interpolation algorithm was adopted as the frequency offset estimation algorithm, which was better than the fast Fourier transform (FFT) algorithm. The simulation results showed that when the correct timing probability reached 100%, under the parameters of m = 8 and N = 512, the performance of the CCPD algorithm was 4 dB higher than that of Du’s algorithm, and that of the ACPD algorithm was 7 dB. Under the same parameters, the quadratic interpolation algorithm also had a great performance improvement in both small and large frequency offsets, when compared with the FFT algorithm. Full article

In underwater acoustic cellular (UWAC) systems, underwater equipment or sensor nodes (UE/SN) should perform downlink synchronisation and a cell search during the initial access stage using the preambles received from adjacent underwater base stations (UWBSs). The UE/SN needs to estimate accurate timing and cell ID (CID) using the received preambles, and synchronise with a serving UWBS, even in high-Doppler environments. In this paper, a sequence design technique for joint estimation of accurate timing and CID in UWAC systems with a high Doppler is proposed to decrease the receiver complexity and processing time. A generalised Zadoff–Chu sequence is proposed for the preamble design. This sequence is decomposed into multiple short sub-sequences to reduce the effect of Doppler shift on the timing and CID estimation. The performance loss caused by the short sequence length is compensated by combining the sub-sequences using the repetition property of the ZC sequence. The properties (autocorrelation and cross-correlation) of the proposed sequence are derived analytically in the presence of Doppler shift and compared with the simulation results. The simulation results reveal that the proposed technique performs better than existing techniques in both additive white Gaussian noise and multipath channels with a high-Doppler. It is concluded that the proposed technique is suitable for accurate timing estimation and CID detection in UWAC systems with a high Doppler. Full article

The concept of an intelligent reflecting surface (IRS) has recently emerged as a promising solution for improving the coverage and energy/spectral efficiency of future wireless communication systems. However, as the number of reflecting elements in an IRS increase, the beam training protocol in IRS-assisted millimeter-wave (mmWave) cellular systems requires a large beam training time because it needs to find the best beam pairs for the link between the base station (BS) and the IRS, as well as the link between the IRS and the mobile station (MS). In this paper, a fast beam training technique for IRS-assisted mmWave cellular systems with a uniform rectangular array is proposed for detecting the best beam pairs of BS-IRS and IRS-MS links simultaneously. Two different types of beam training signals (BTSs) are proposed to distinguish simultaneously transmitted beams from the BSs in multi-cell multi-beam environments: the Zadoff–Chu sequence based BTS (ZC-BTS) and m-sequence based BTS (m-BTS). The correlation properties of ZC-BTSs and m-BTSs are analyzed in multi-cell multi-beam environments. In addition, the effect of symbol time offset on the ZC-BTS and m-BTS is analyzed. Finally, simulation results reveal that the proposed technique can significantly reduce the beam training time for IRS-assisted mmWave cellular systems. Full article

From a conceptual perspective, beyond-5G technologies promise to deliver very low latency, even higher data rates, and ultrareliable connections for future generations of communication systems. Modulation schemes based on orthogonal frequency-domain multiplexing (OFDM) can accommodate these requirements for wireless systems. Several hybrid OFDM-based systems, such as the time-interleaved block-windowed burst–OFDM (TIBWB–OFDM), are capable of achieving even better spectral confinement and power efficiency. This paper addresses the implementation of the TIBWB–OFDM system in more realistic and practical wireless link scenarios by addressing the challenges of proper and reliable channel estimation and frame synchronization. We propose to incorporate a preamble formed by optimal correlation training sequences such as the Zadoff–Chu (ZC) sequences. The added ZC preamble sequence is used to jointly estimate the frame beginning through signal-correlation strategies and a threshold decision device, and acquire channel-state information (CSI) by employing estimators on the basis of the preamble sequence and transmitted data. The employed receiver estimators show that it is possible to detect the TIBWB–OFDM frame beginning and highlight the robustness of the TIBWB–OFDM technique to imperfect channel estimations by showing that it can provide comparatively close BER performance to the one where the CSI is perfectly known. Full article

Timing detection is the first step and very important in wireless communication systems. Timing detection performance is usually affected by the frequency offset. Therefore, it is a challenge to design the synchronization signal in massive narrowband Internet of Things (NB-IoT) scenarios where the frequency offset is usually large due to the low cost requirement. In this paper, we firstly proposed a new general synchronization signal structure with a couple of sequences which are conjugated to remove the potential timing error that arises from large frequency offset. Then, we analyze the suitable sequence for our proposed synchronization signal structure and discuss a Zadoff–Chu (ZC) sequence with root 1 as an example. Finally, the simulation results demonstrate that our proposed synchronization signal can work well when the frequency offset is large. It means that our proposed synchronization signal design is very suitable for the massive NB-IoT. Full article

In this paper, a random access preamble (RAP) design technique for underwater acoustic cellular systems is proposed. After showing that the conventional RAP used in long term evolution (LTE) systems is not appropriate for underwater acoustic cellular systems, two different types of RAPs (RAP 1 and RAP 2) are proposed to detect the identity of underwater equipment/nodes (UEs) and estimate the time delay between a UE and an underwater base station (UBS) at the physical layer. RAP 1 is generated using a Zadoff-Chu (ZC) sequence where the identity of the UE is mapped to its root index, whereas RAP 2 is generated using a linear frequency modulation (LFM) waveform where the identity of the UE is mapped to its frequency sweeping parameter and frequency shifting parameter. Ambiguity functions (AFs) and cross-ambiguity functions (CAFs) of RAP 1 and RAP 2 are derived to investigate their correlation properties under the effect of time delay and Doppler shift. The performance of RAP detection is investigated by analyzing the detection probabilities and false alarm probabilities of RAP 1 and RAP 2 in a Doppler environment. By evaluating the performances of RAP 1 and RAP 2 in various situations, it is concluded that RAP 2 is more suitable for underwater acoustic cellular systems. The AF and CAF analytically obtained in this paper are shown to be similar to those obtained using experimental data. Full article

The processing time for beam training in millimeter-wave (mmWave) cellular systems can be significantly reduced by a code division multiplexing (CDM)-based technique, where multiple beams are transmitted simultaneously with their corresponding Tx beam IDs (BIDs) in the preamble. However, mmWave cellular systems with CDM-based preambles require a large number of cell IDs (CIDs) and BIDs, and a high computational complexity for CID and BID (CBID) searches. In this paper, a new preamble design technique that can increase the number of CBIDs significantly is proposed, using a preamble sequence constructed by a combination of two Zadoff-Chu (ZC) sequences. An efficient technique for the CBID detection is also described for the proposed preamble. It is shown by simulations using a simple model of an mmWave cellular system that the proposed technique can obtain a significant reduction in the complexity of the CBID detection without a noticeable performance degradation, compared to the previous technique. Full article