Search Results (6)

Wind power systems, which are currently being constructed for the electricity worldwide market, are mostly based on Doubly Fed Induction Generators (DFIGs). To control such systems, multilevel converters are increasingly preferred due to the well-known benefits they provide. This paper deals with the control of a standalone DFIG-based Wind Energy Conversion System (WECS) by using a three-level Neutral-Point-Clamped (NPC) converter. The frequency and magnitude of the stator output voltage of the DFIG are controlled and fixed at nominal values despite the variable rotor speed, ensuring a continuous AC supply for three-phase loads. This task is achieved by controlling the DFIG rotor currents via a PI controller combined with a new Simplified Direct Space Vector Modulation strategy (SDSVM), which is applied to the three-level NPC converter. This strategy is based on the use of a line-to-line three-level converter space vector diagram without using Park transformation and then simplifying it to that of a two-level converter. The performance of the proposed SDSVM technique in terms of controlling the three-level NPC-converter-based standalone WECS is demonstrated through simulation results. The whole WECS control and the SDSVM strategy are implemented on a dSPACE DS 1104 board that drives a DFIG-based wind system test bench. The obtained experimental results confirm the validity and performance in terms of control. Full article

Interactions between wave energy converters (WECs) can significantly affect the overall energy-harnessing performance of a wave park. Although large-size wave parks with many WEC units are commonly considered in practical applications, it is challenging to simulate such parks due to huge computational costs. This paper presents a numerical model that uses the boundary element method (BEM) to simulate wave parks. Each wave energy converter (WEC) was modelled as a comprehensive system, including WEC buoys, power take-off, and mooring systems, with hydrodynamic interactions included. Two classical layouts for arranging 16 units were simulated using this numerical model. The energy-harnessing performance of these array layouts was analyzed for both regular waves and a selection of irregular sea state conditions with different wave directions, wave heights, wave periods and water depths. For each layout, three WEC separation distances were studied. An increase of up to 16% in the power performance of the WEC under regular waves was observed, which highlights the importance of interaction effects. Full article

Estimation on the production capacity of wave energy converter arrays (WECs) of the type of simple floaters deployed in nearshore locations highly depends on the evaluation of their performance. The latter also depends on various factors, including the dimensions and inertial characteristics of the devices, their relevant positioning, and the power take-off (PTO) system characteristics. Studying the system operation, based on the prevailing sea conditions in the region considered for deployment, can ensure that such WEC farms are sized and designed in an effective way. Furthermore, the wavelength and propagation direction of incoming wave fields can be significantly impacted by wave-seabed interactions in coastal areas, which can alter the WECs’ response pattern and ultimately the array’s power output. In this work, a 3D BEM hydrodynamic model is proposed aiming to assess the energy-capturing capacity of WEC arrays, accounting for the hydrodynamic interactions between various identical floating devices, as well as the local seabed topography. The model is supplemented by a Coupled Mode System (CMS) to calculate the incident wave field propagating over variable bathymetry, in order to simulate realistic nearshore environments. Finally, a case study is performed for an indicative geographical area, north of the coast of the island of Ikaria, located in the Eastern Aegean Sea region, where the wave potential is high, using long-term data. The latter study highlights the applicability of the proposed method and suggests its usage as a tool to support optimal WEC park design. Full article

A simplified model based on the Modified Mild-Slope Equation with inclusions is developed for modelling the scattering of waves from multiple heaving point absorbers arranged in an array in general bottom topography. The model is used, in conjunction with a 3D BEM, in order to estimate the parameters modelling the energy extraction of the devices using data obtained from the hydrodynamic responses and performance of the single floating WEC. Subsequently, the present model is used for specific examples to calculate the wave field and the hydrodynamic performance of arrays of heaving WECs in constant depth and variable bathymetry regions and illustrate the effect of bottom slope and variation on the calculated wave field in the domain and in the vicinity of the devices. The present simplified model provides a low-cost first estimation of the wave conditions in the domain, which could be exploited as a supporting tool for best arrangement and park design purposes. Full article

Experiments have been performed in the Shallow Water Wave Basin of DHI (Hørsholm, Denmark), on large arrays of up to 25 heaving point absorber type Wave Energy Converters (WECs), for a range of geometric layout configurations and wave conditions. WEC response and modifications of the wave field are measured to provide data for understanding WEC array interactions and to evaluate array interaction numerical models. Each WEC consists of a buoy with a diameter of 0.315 m and power take-off (PTO) is modeled by realizing friction based energy dissipation through damping of the WEC’s motion. Wave gauges are located within and around the WEC array. Wave conditions studied include regular, polychromatic, long- and short-crested irregular waves. A rectilinear arrangement of WEC support structures is employed such that several array configurations can be studied. In this paper, the experimental arrangement and the obtained database are presented. Also, results for wave height attenuation downwave a rectilinear array of 25 heaving WECs are presented, for the case of irregular waves. Up to 16.3% and 18.1% (long-crested) and 11.2% and 18.1% (short-crested waves) reduction in significant wave height is observed downwave the WEC array, for the radiated wave field only and for the combination of incident-diffracted-radiated (perturbed) wave field, respectively. Using spectra at different locations within and around the array, the wave field modifications are presented and discussed. Full article

Wave energy conversion is a clean electric power production technology. During operation there are no emissions in the form of harmful gases. However there are unsolved issues considering environmental impacts such as: electromagnetism; the artificial reef effect and underwater noise. Anthropogenic noise is increasing in the oceans worldwide and wave power will contribute to this sound pollution in the oceans; but to what extent? The main purpose of this study was to examine the noise emitted by a full scale operating Wave Energy Converter (WEC) in the Lysekil project at Uppsala University in Sweden. A minor review of the hearing capabilities of fish and marine mammals is presented to aid in the conclusions of impact from anthropogenic sound. A hydrophone was deployed to the seabed in the Lysekil research site park at distance of 20 and 40 m away from two operational WECs. The measurements were performed in the spring of 2011. The results showed that the main noise was a transient noise with most of its energy in frequencies below 1 kHz. These results indicate that several marine organisms (fish and mammals) will be able to hear the operating WECs of a distance of at least 20 m. Full article