Search Results (4)

Energy efficiency (EE) is the main target of wireless communication nowadays. In this paper, we investigate hybrid precoding (HP) and massive multiple-input multiple-output (MIMO) systems for a high-altitude platform (HAP). The HAP is an emerging solution operating in the stratosphere at an amplitude of up to 20–40 km to provide communication facilities that can achieve the best features of both terrestrial and satellite systems. The existing hybrid beamforming solution on a HAP requires a large number of high-resolution phase shifters (PSs) to realize analog beamforming and radio frequency (RF) chains associated with each antenna and achieve better performance. This leads to enormous power consumption, high costs, and high hardware complexity. To address such issues, one possible solution that has to be tweaked is to minimize the number of PSs and RFs or reduce their power consumption. This study proposes an HP sub-connected low-resolution bit PSs to address these challenges while lowering overall power consumption and achieving EE. To significantly reduce the RF chain in a massive MIMO system, HP is a suitable solution. This study further examined adaptive cross-entropy (ACE), a machine learning-based optimization that optimizes the achievable sum rate and energy efficiency in the Rician fading channel for HAP massive MIMO systems. ACE randomly generates several candidate solutions according to the probability distribution (PD) of the elements in HP. According to their sum rate, it adaptively weights these candidates’ HP and improves the PD in HP systems by minimizing the cross-entropy. Furthermore, this work suggests energy consumption analysis performance evaluation to unveil the fact that the proposed technique based on a sub-connected low-bit PS architecture can achieve near-optimum EE and sum rates compared with the previously reported methods. Full article

Wind energy is one of the supremely renewable energy sources and has been widely established worldwide. Due to strong seasonal variations in the wind resource, accurate predictions of wind resource assessment and appropriate wind speed distribution models (for any location) are the significant facets for planning and commissioning wind farms. In this work, the wind characteristics and wind potential assessment of onshore, offshore, and nearshore locations of India—particularly Kayathar in Tamilnadu, the Gulf of Khambhat, and Jafrabad in Gujarat—are statistically analyzed with wind distribution methods. Further, the resource assessments are carried out using Weibull, Rayleigh, gamma, Nakagami, generalized extreme value (GEV), lognormal, inverse Gaussian, Rician, Birnbaum–Sandras, and Bimodal–Weibull distribution methods. Additionally, the advent of artificial intelligence and soft computing techniques with the moth flame optimization (MFO) method leads to superior results in solving complex problems and parameter estimations. The data analytics are carried out in the MATLAB platform, with in-house coding developed for MFO parameters estimated through optimization and other wind distribution parameters using the maximum likelihood method. The observed outcomes show that the MFO method performed well on parameter estimation. Correspondingly, wind power generation was shown to peak at the South West Monsoon periods from June to September, with mean wind speeds ranging from 9 to 12 m/s. Furthermore, the wind speed distribution method of mixed Weibull, Nakagami, and Rician methods performed well in calculating potential assessments for the targeted locations. Likewise, the Gulf of Khambhat (offshore) area has steady wind speeds ranging from 7 to 10 m/s with less turbulence intensity and the highest wind power density of 431 watts/m². The proposed optimization method proves its potential for accurate assessment of Indian wind conditions in selected locations. Full article

Simultaneous wireless information and power transfer is a practicable solution to encourage energy-constrained relay nodes to cooperate with the source to transmit information to the destination. In this paper, we study the outage performance of hybrid protocol based amplify-and-forward (AF) relay networks over asymmetric fading channels, where the source-relay link and the relay-destination link are subjected to Rician fading and Rayleigh fading, respectively. In particular, we derive the lower bound of outage probability and the upper bound of outage capacity based on a high signal-to-noise ratio approximation, respectively. We further investigate the effects of various system parameters, such as the parameters of hybrid protocol, the target rate, and the Rician K-factor, on the investigated network. It is shown that a good selection of parameters of hybrid protocol is of significance to improve system capacity, and that a larger Rician factor is desirable in the investigated network. Full article

This paper investigates the joint target parameter (delay and Doppler) estimation performance of linear frequency modulation (LFM)-based radar networks in a Rice fading environment. The active radar networks are composed of multiple radar transmitters and multichannel receivers placed on moving platforms. First, the log-likelihood function of the received signal for a Rician target is derived, where the received signal scattered off the target comprises of dominant scatterer (DS) component and weak isotropic scatterers (WIS) components. Then, the analytically closed-form expressions of the Cramer-Rao lower bounds (CRLBs) on the Cartesian coordinates of target position and velocity are calculated, which can be adopted as a performance metric to access the target parameter estimation accuracy for LFM-based radar network systems in a Rice fading environment. It is found that the cumulative Fisher information matrix (FIM) is a linear combination of both DS component and WIS components, and it also demonstrates that the joint CRLB is a function of signal-to-noise ratio (SNR), target’s radar cross section (RCS) and transmitted waveform parameters, as well as the relative geometry between the target and the radar network architectures. Finally, numerical results are provided to indicate that the joint target parameter estimation performance of active radar networks can be significantly improved with the exploitation of DS component. Full article