Search Results (7)

This paper presents an overview of a research line developed at the Istituto Centrale per il Restauro within the CHANGES (Cultural Heritage Active Innovation for Next-Gen Sustainable Society) project, funded under the Italian National Recovery and Resilience Plan. The research was developed in different phases: a first one dedicated to the study of the deep background and the state of the art in the ICR background: history, methodologies and research in the field; a second phase was dedicated to the selection of a specific urban art mural, as a key study with conservation problems connected to some of the principal preservation treatments related to the outdoor context; the mural was also identified as a beloved icon in the public space with a profound socio-cultural meaning for the community. Nido di Vespe, created in 2014 by the artist Lucamaleonte is part of a broader artistic project called M.U.Ro-Museum of Urban Art of Rome, an open-air public art museum located in the Quadraro district in Rome, designed by the artist Diavù. A third phase focused on the research in ICR laboratories, specifically addressing: cleaning, reintegration, and protection strategies adapted to dynamic outdoor environments. A multi-step cleaning system based on polyvinyl alcohol-borax semi-interpenetrated hydrogels loaded with nanostructured fluids was developed to selectively remove spray-paint vandalism while preserving the chemically similar original pictorial layers. The reintegration phase investigated acrylic and urea-aldehyde resins as binders to produce compatible, reversible, and UV-traceable retouching and infilling materials. For surface protection, multilayer coating systems incorporating nanoparticles with antimicrobial, photocatalytic, and UV-stabilizing properties were formulated to enhance durability and chromatic stability. Laboratory tests on mock-ups simulating typical street and urban art materials and morphologies showed satisfactory results, while diagnostic investigations on Nido di Vespe provided the reference data to calibrate the experiments with real mural conditions. Cleaning tests demonstrated promising removal efficiency, influenced by the chemical composition, thickness of the overpainted layers, and surface roughness. The reintegration system met the expected performance requirements, as the tested binders provided good results and allowed the development of compatible, reversible, and distinguishable solutions. Protective coatings showed good results in terms of chromatic stability and surface integrity; however, the long-term behavior of both reintegration, cleaning, and protection systems requires further evaluation. The results achieved so far support the development of sustainable and flexible conservation strategies for the conservation of contemporary street and urban murals and will guide the future application of the selected materials and methodologies in pilot conservation interventions on the mural chosen as a meaningful case study within the broader research. Full article

This Special Issue was launched in connection with the joint XIII National Congress of AICIng (the Italian Association of Chemistry for Engineering) and the II National Congress of the Division of Chemistry for the Technologies of the Italian Chemical Society, held at the Politecnico di Milano (Italy) from 25 to 28 June 2023 [...] Full article

The reproducibility of an extemporaneous preparation is an essential condition for guaranteeing the quality, efficacy, and safety of the medicinal product. This study aimed to develop a controlled one-step process for cannabis olive oil preparations by applying digital technologies. For this purpose, the chemical profile of cannabinoid contents in oil extracts of Bedrocan, FM2, and Pedanios varieties obtained with the already in use method, proposed by the Italian Society of Compounding Pharmacists (SIFAP), was compared with two new methods, specifically the Tolotto Gear^® extraction method (TGE) and the Tolotto Gear^® extraction method preceded by a pre-extraction procedure (TGE-PE). HPLC analyses showed that the concentration of THC using cannabis flos with a high THC content (over 20% w/w) was always higher than 21 mg/mL for the Bedrocan variety and close to 20 mg/mL for the Pedanios variety when applying TGE, while with TGE-PE, the THC concentration was higher than 23 mg/mL for the Bedrocan variety. For the FM2 variety, the amounts of THC and CBD in the oil formulations obtained using TGE were higher than 7 mg/mL and 10 mg/mL, respectively, and for TGE-PE, the concentrations of THC and CBD were higher than 7 mg/mL and 12 mg/mL, respectively. GC-MS analyses were performed to define the terpene contents in the oil extracts. The samples of Bedrocan flos extracted with TGE-PE displayed a distinctive profile, highly rich in terpenes and devoid of oxidized volatile products. Thus, TGE and TGE-PE allowed performing a quantitative extraction of cannabinoids and increasing the total mono-di-tri terpenes and sesquiterpene concentrations. The methods were repeatable and applicable to any quantity of raw material, preserving the phytocomplex of the plant. Full article

Background: Several studies showed important differences in the interpretation of spirometry based on different reference values, in particular by comparing European Respiratory Society (ERS) 1993 and Global Lung Function Initiative (GLI) 2012. The validation of new reference values in local populations is essential before they can be used in an appropriate manner. This study aimed to investigate the fit of GLI reference values in a healthy Italian working population. Methods: Spirometry data were collected in 1355 workers during their health surveillance medical examination conducted for exposure to chemical and biological risk factors. A single portable spirometer that met the ATS/ERS recommendations for occupational testing was used and calibrated daily. Results: Average z-score were −0.13 (with a median of −0.17), −0.25 (with a median of −0.24), and 0.18 (with a median of 0.17) for FEV₁, FVC, and FEV₁/FVC ratio, respectively. Considering only the normal-weighted workers, the average z-scores were −0.07 (with a median of −0.16), −0.15 (with a median of −0.16), and 0.07 (with a median of 0.02) for FEV₁, FVC, and FEV₁/FVC ratio, respectively. Conclusions: GLI 2012 reference values fit the Italian data satisfactorily, resulting as more accurate than ERS 1993, especially in women, normal-weighted subjects, aged 30−50 years, and for height < 165 cm. Full article

This paper illustrates the origin, mission, organization and main activities of the Interdivisional Group of Separation Science (Gruppo Interdivisionale di Scienza delle Separazioni, GISS) of the Italian Chemical Society in occasion of the twentieth anniversary of this organization, whose mission is to promote and disseminate knowledge on all aspects of separation science and to facilitate strong peer-to-peer relationships. GISS originates from a discussion group, also belonging to the Italian Chemical Society (SCI), having similar finality and the same promoter (the Italian pioneer of Chromatography Prof. Arnaldo Liberti), but less extended scientific interests than the GISS, since it was mainly focused on liquid and gas chromatography. The interests of the GISS span theoretical and practical aspects of separation science and cover all key topics requiring high-performance separation techniques to carry out advanced investigations and/or solve challenging analytical problems. The panoramic view of the GISS includes a synthetic review of the main activities carried out since its foundation, which comprises fast-track discussion meetings, participation, promotion and/or organization of national and international congresses, sponsorship of participation grants for young trainees and Ph.D. students, recognition of scientists who have made and continue to make an outstanding contribution to separation science, as well as young scientists who have evidenced their attitude to carry out significant studies in the field of separation science. Full article

By studying the literature about tetracyclines (TCs), it becomes clearly evident that TCs are very dynamic molecules. In some cases, their structure-activity-relationship (SAR) are well known, especially against bacteria, while against other targets, they are virtually unknown. In other diverse fields of research—such as neurology, oncology and virology—the utility and activity of the tetracyclines are being discovered and are also emerging as new technological fronts. The first aim of this paper is to classify the compounds already used in therapy and prepare the schematic structure that includes the next generation of TCs. The second aim of this work is to introduce a new framework for the classification of old and new TCs, using a medicinal chemistry approach to the structure of those drugs. A fully documented Structure-Activity-Relationship (SAR) is presented with the analysis data of antibacterial and nonantibacterial (antifungal, antiviral and anticancer) tetracyclines. The lipophilicity and the conformational interchangeability of the functional groups are employed to develop the rules for TC biological activity. Full article

In order to study and develop an economical solution to environmental pollution in water, a wide variety of materials have been investigated. Natural zeolites emerge from that research as the best in class of this category. Zeolites are natural materials which are relatively abundant and non biodegradable, economical and serve to perform processes of environmental remediation. This paper contains a full description of a new method to characterize the superficial properties of natural zeolites of exotic provenience (Caribbean Islets) with atomic force microscopy (AFM). AFM works with the simplicity of the optical microscope and the high resolution typical of a transmission electron microscope (TEM). If the sample is conductive, structural information of mesoporous material is obtained using scanning and transmission electron microscopy (SEM and TEM), otherwise the sample has to be processed through the grafitation technique, but this procedure induces errors of topography. Therefore, the existing AFM method, to observe zeolite powders, is made in a liquid cell-head scanner. This work confirms that it is possible to use an ambient air-head scanner to obtain a new kind of microtopography. Once optimized, this new method will allow investigation of organic micelles, a very soft nanostructure of cetyltriammonium bromide (CTAB), upon an inorganic surface such as natural zeolites. The data also demonstrated some correlation between SEM microphotographies and AFM 3D images. Full article