Search Results (11)

The emergence of hitherto unknown viral pathogens presents a great challenge for researchers to develop effective therapeutics and vaccines within a short time to avoid an uncontrolled global spread, as seen during the coronavirus disease 2019 (COVID-19) pandemic. Therefore, rapid and simple methods to identify immunogenic antigens as potential therapeutical targets are urgently needed for a better pandemic preparedness. To address this problem, we chose the well-characterized Modified Vaccinia virus Ankara (MVA)-T7pol expression system to establish a workflow to identify immunogens when a new pathogen emerges, generate candidate vaccines, and test their immunogenicity in an animal model. By using this system, we detected severe acute respiratory syndrome (SARS) coronavirus 2 (SARS-CoV-2) nucleoprotein (N)-, and spike (S)-specific antibodies in COVID-19 patient sera, which is in line with the current literature and our observations from previous immunogenicity studies. Furthermore, we detected antibodies directed against the SARS-CoV-2-membrane (M) and -ORF3a proteins in COVID-19 patient sera and aimed to generate recombinant MVA candidate vaccines expressing either the M or ORF3a protein. When testing our candidate vaccines in a prime-boost immunization regimen in humanized HLA-A2.1-/HLA-DR1-transgenic H-2 class I-/class II-knockout mice, we were able to demonstrate M- and ORF3a-specific cellular and humoral immune responses. Hence, the established workflow using the MVA-T7pol expression system represents a rapid and efficient tool to identify potential immunogenic antigens and provides a basis for future development of candidate vaccines. Full article

A green, low-carbon concrete is a top way to recycle waste in construction. This study uses industrial solid waste slag powder (S95) and fly ash (FA) as binders to completely replace cement. This study used recycled coarse aggregate (RCA) instead of natural coarse aggregate (NCA). This is to prepare alkali-activated recycled concrete (AARC) with different cementitious material systems. Alkali-activated concrete (AAC) mixtures are modified for strength and performance based on the mechanical qualities and durability of AARC. Also, the time-varying effects of the environment on AARC properties are explored. The results show that with the performance enhancement of RCA, the mechanical performance of AARC is significantly improved. As RCA’s quality improves, so does AARC’s compressive strength. At a cementitious material content of 550 kg/m³, AARC’s 28d compressive strengths using I-, II-, and III-class RCA were reduced by 2.2%, 12.7%, and 21.8%, respectively. I-class AARC has characteristics similar to natural aggregate concrete (NAC) in terms of shrinkage, resistance to chloride penetration, carbonization, and frost resistance. AARC is a new type of green building material that uses industrial solid waste to prepare alkali-activated cementitious materials. It can effectively reduce the amount of cement and alleviate energy consumption. This is conducive to the reuse of resources, environmental protection, and sustainable development. Full article

Meat and meat products have a critical role in the human diet as important high-nutrient foods that are widely consumed worldwide. This study evaluated the effects of postmortem aging on Hu sheep’s meat quality in the longissimus dorsi (LD) muscle during postmortem aging. The samples were stored at 4 ± 1 °C; the meat quality was measured at 6 h, 12 h, 24 h, 36 h, 48 h, 72 h, 96 h, 120 h, 144 h, and 168 h of postmortem aging. The results showed that, during the postmortem aging process, the pH of the muscles first decreased and then increased, and the shear force first increased and then decreased. The muscle fiber skeleton began to degrade, and the overall meat quality was improved to some extent. In addition, through ACQUITY UPLC I-Class Plus IMS Qtof identification of the muscle samples at different time points during the postmortem maturation process of the meat of Hu sheep, a total of 2168 metabolites were identified, and 470 metabolites were screened based on the VIP, P, and FC values, of which 79 were involved in KEGG pathways. In addition, pathways such as sphingolipid metabolism, glycerophospholipid metabolism, phenylalanine metabolism, and fatty acid elongation and degradation play an important role in the metabolic product changes in the meat of Hu sheep throughout the entire maturation process. These findings provide some insights into the changes in meat quality during the post-slaughter maturation process of lake lamb. Full article

The increase in life expectancy without a decrease in the years lived without disability leads to the rise of the population aged over 65 years prone to polypharmacy. The novel antidiabetic drugs can improve this global therapeutic and health problem in patients with diabetes mellitus (DM). We aimed to establish the efficacy (A1c hemoglobin reduction) and safety of the newest antidiabetic drugs (considered so due to their novelty in medical practice use), specifically DPP-4i, SGLT-2i, GLP-1 Ra, and tirzepatide. The present meta-analysis followed the protocol registered at Prospero with the CRD42022330442 registration number. The reduction in HbA1c in the DPP4-i class for tenegliptin was 95% CI −0.54 [−1.1, 0.01], p = 0.06; in the SGLT2-iclass for ipragliflozin 95% CI −0.2 [−0.87, 0.47], p = 0.55; and for tofogliflozin 95% CI 3.13 [−12.02, 18.28], p = 0.69, while for tirzepatide it was 0.15, 95% CI [−0.50, 0.80] (p = 0.65). The guidelines for treatment in type 2 DM are provided from cardiovascular outcome trials that report mainly major adverse cardiovascular events and data about efficacy. The newest antidiabetic non-insulinic drugs are reported to be efficient in lowering HbA1c, but this effect depends between classes, molecules, or patients’ age. The newest antidiabetic drugs are proven to be efficient molecules in terms of HbA1c decrease, weight reduction, and safety, but more studies are needed in order to characterize exactly their efficacy and safety profiles. Full article

A number of steroids, including glucocorticoids and sex hormones, have been associated with neurodegenerative and cardiovascular conditions common in aging populations. The application of liquid chromatography tandem mass spectrometry (LC-MS/MS) steroid analysis offers an opportunity to conduct simultaneous multiplex steroid analysis within a given sample. In this paper, we describe the application of an LC-MS/MS steroid analysis method for the assessment of reference ranges of steroids in human saliva samples (200 µL) collected from older adults (age 50 years and above) enrolled in a European cohort investigating the risk for Alzheimer’s dementia. Saliva samples were prepared using supported liquid extraction (SLE) along with a calibration curve and analysed using a Waters I-Class UPLC (Ultra Performance Liquid Chromatography) and a Sciex QTrap 6500+ mass spectrometer. Mass spectrometry parameters of steroids were optimised for each steroid and a method for the chromatographic separation of 19 steroids was developed. Lower limits of quantitation (LLOQs), linearity and other method criteria were assessed. In total, data from 125 participants (500 samples) were analysed and assessed for reference ranges (64 male, 61 female). A total of 19 steroids were detected in saliva within the range of the method. There were clear diurnal patterns in most of the steroid hormones detected. Sex differences were observed for androstenedione (A4), testosterone (T), cortisone (E) and aldosterone (Aldo). In the first sample of the day, dehydroepiandrosterone (DHEA) was significantly higher in healthy volunteers compared to those with Alzheimer’s disease biomarkers. This LC-MS/MS method is suitable for the analysis of 19 steroids in saliva in adults. Full article

Background: The collum angle (CA) is an extremely significant for patients who are undergoing orthodontic, dental implant restoration, prosthodontic and periodontic treatments. Aim and Objectives: To determine and compare the mean CA for maxillary central incisor in different types of malocclusion utilizing 3D Cone Beam Computerized Tomography (CBCT) images. The additional objectives were to determine and compare the mean CA for maxillary central incisor based upon the demographic characteristics among Saudi, Jordan and Egypt subpopulation and to test for significant differences in the CA of maxillary central incisor with different molar malocclusions. Methodology: A total of 400 CBCT images were included from the radiology archive at the College of Dentistry, Jouf University (Sakaka, Saudi Arabia). The CBCT images were divided into four groups based upon molar classifications. The selected records were used for the measurement of CA of maxillary central incisor using the measurement tool built into 3D:OnDemand software. Statistical analysis was done using independent t test and ANOVA to examine the differences between gender and races. Results: The mean CA for Class II div 2 exhibited significantly higher crown-root variation as compared other groups (p < 0.0001). Males sample showed greater value of CA for each group as compared to the females and this difference was statistically significant for all the groups other than for Class I (p < 0.05). The post hoc pairwise comparisons between the races showed statistically insignificant findings (p > 0.05). Significant difference was found on pairwise comparisons among different malocclusion groups other than for group Class I/Class II div 1 (p < 0.05). Conclusion: The CA of Class II div 2 group was the greatest as compared to other malocclusion groups. Males sample showed greater value of CA for each group as compared to the females and this difference was statistically significant for all the groups other than for Class I. Statistically insignificant difference was noted for the mean CA among different races whereas significant difference was found on pairwise comparisons among different malocclusion groups other than for group Class I/Class II div 1. Full article

Polyphenols constitute a diverse array of naturally occurring secondary metabolites found in plants which, when consumed, have been shown to promote human health. Greater consumption may therefore aid in the fight against diseases such as obesity, diabetes, heart disease, cancer, etc. Tree bark is polyphenol-rich and has potential to be used in food supplements. However, it is important to gain insight into the polyphenol profile of different barks to select the material with greatest concentration and diversity. Ultra-performance liquid chromatography (UPLC) was coupled with an ion mobility time-of-flight high-definition/high-resolution mass spectrometer (UPLC-HDMS^E) to profile ethanol extracts of three common tree barks (Pinus contorta, Pinus sylvestris, Quercus robur) alongside a commercial reference (Pycnogenol^® extracted from Pinus pinaster). Through the use of Progenesis QI informatics software, 35 high scoring components with reported significance to health were tentatively identified across the three bark extracts following broadly the profile of Pycnogenol^®. Scots Pine had generally higher compound abundances than in the other two extracts. Oak bark extract showed the lowest abundances but exhibited higher amounts of naringenin and 3-O-methylrosmarinic acid. We conclude that forestry bark waste provides a rich source of extractable polyphenols suitable for use in food supplements and so can valorise this forestry waste stream. Full article

Despite the implications leaves have for life, their origin and development remain debated. Analyses across ferns and seed plants are fundamental to address the conservation or independent origins of megaphyllous leaf developmental mechanisms. Class I KNOX expression studies have been used to understand leaf development and, in ferns, have only been conducted in species with divided leaves. We performed expression analyses of the Class I KNOX and Histone H4 genes throughout the development of leaf primordia in two simple-leaved and one divided-leaved fern taxa. We found Class I KNOX are expressed (1) throughout young and early developing leaves of simple and divided-leaved ferns, (2) later into leaf development of divided-leaved species compared to simple-leaved species, and (3) at the leaf primordium apex and margins. H4 expression is similar in young leaf primordia of simple and divided leaves. Persistent Class I KNOX expression at the margins of divided leaf primordia compared with simple leaf primordia indicates that temporal and spatial patterns of Class I KNOX expression correlate with different fern leaf morphologies. However, our results also indicate that Class I KNOX expression alone is not sufficient to promote divided leaf development in ferns. Class I KNOX patterns of expression in fern leaves support the conservation of an independently recruited developmental mechanism for leaf dissection in megaphylls, the shoot-like nature of fern leaves compared with seed plant leaves, and the critical role marginal meristems play in fern leaf development. Full article

Unlike seed plants, ferns leaves are considered to be structures with delayed determinacy, with a leaf apical meristem similar to the shoot apical meristems. To better understand the meristematic organization during leaf development and determinacy control, we analyzed the cell divisions and expression of Class I KNOX genes in Mickelia scandens, a fern that produces larger leaves with more pinnae in its climbing form than in its terrestrial form. We performed anatomical, in situ hybridization, and qRT-PCR experiments with histone H4 (cell division marker) and Class I KNOX genes. We found that Class I KNOX genes are expressed in shoot apical meristems, leaf apical meristems, and pinnae primordia. During early development, cell divisions occur in the most distal regions of the analyzed structures, including pinnae, and are not restricted to apical cells. Fern leaves and pinnae bear apical meristems that may partially act as indeterminate shoots, supporting the hypothesis of homology between shoots and leaves. Class I KNOX expression is correlated with indeterminacy in the apex and leaf of ferns, suggesting a conserved function for these genes in euphyllophytes with compound leaves. Full article

The concentrations of dissolved inorganic nitrogen (DIN; NO₂⁻–N, NH₃–N, and NO₃⁻–N), PO₄³⁻–P, dissolved oxygen (DO), chemical oxygen demand (COD), five-day biological oxygen demand (BOD₅), oil, Si, and seven heavy metals (Hg, Cr, Cu, As, Zn, Pb, and Cd) in seawater from the Dongzhaigang National Mangrove Nature Reserve of China in 2013 were determined. Except for the concentrations of the COD, BOD₅, Cr, Hg, Cu, As, and Cd, each index in seawater were found to be over the limits of I-Class seawater standards. The index of organic pollution showed that the pollution level in this study area reached level 6; eutrophication levels indicated that the nutritional level reached level 4. According to the water quality index model, the sea area was slightly polluted by heavy metals. In a genetic algorithm-based fuzzy comprehensive evaluation, the results for organic pollutants, nutrients, and heavy metal pollution can be combined to evaluate the water quality as a whole. Results showed that the sea area in Dongzhaigang did not have a healthy water environment, but was seriously polluted by organic pollutants and nutrients. Full article

The University of Canterbury has developed a rocket research group, UC Rocketry, which recently broke the world altitude record for an I-class motor (impulse of 320–640 Ns) and has run a rocketry course for the first time in New Zealand. This paper discusses the development and results of the world record rocket “Milly” and details all the fundamental elements of the rocketry final year engineering course, including the manufacturing processes, wind tunnel testing, avionics, control and the final rocket launch of “Smokey”. The rockets Milly and Smokey are an example of the design, implementation and testing methodologies that have significantly contributed to research and graduates for New Zealand’s space program. Full article