Search Results (8)

Understanding indoor black carbon (BC) dynamics is important for assessing human exposure and informing air quality management in residential settings. This study presents a high-resolution, multi-sensor dataset collected over 24 days in a semi-occupied home in Zagreb, Croatia, designed to characterize the temporal behavior and sources of indoor BC. Indoor BC concentrations were measured at 1 min resolution using a dual-spot aethalometer, with source apportionment into biomass burning and fossil fuel components. Complementary contextual data including motion detection, door and window states, and traffic activity were collected in parallel using smart sensors and annotated experimental logs. Across the monitoring period, daily mean BC concentrations ranged from 174.7 and 1053.1 ng/m³ for biomass burning BC and between 53.2 and 880.3 ng/m³ for fossil fuel component. Statistical analyses revealed significant increases in BC concentrations during direct combustion-related activities, including scented candle burning and gas burner use. Additional BC elevations were associated with mechanical heat sources and nearby vehicle traffic, particularly affecting the fossil fuel BC component. In contrast, non-combustion activities such as brief human presence exhibited minor or inconsistent effects on indoor BC levels. This study elucidates the primary role of combustion-based indoor activities in influencing short-term BC exposure and highlights the importance of synchronized, high-resolution datasets for indoor air quality research. Full article

Understanding how traffic contributes to air pollution, especially in urban areas, is essential for designing effective strategies to reduce air pollution emissions. This study examines the hourly association between traffic volume and concentrations of two air pollution indicators (NO₂ and PM₁₀) using high-resolution data from two monitoring stations in Helsinki. A Prophet time series model was applied to forecast hourly traffic trends for 2024, which were then compared to yearly average NO₂ and PM₁₀ concentrations. Polynomial regression and cross-correlation analyses were used to capture temporal patterns and assess the strength and timing of the relationship. The results show a strong alignment between traffic and NO₂ and PM₁₀ concentrations, particularly at the traffic-heavy measuring site (Mäkelänkatu supersite), with minimal time lag observed. Root mean square error (RMSE) and polynomial fit comparisons confirmed the predictive value of traffic trends in estimating the behavior of NO₂ and PM₁₀ concentrations. These findings support the use of traffic-based proxy models as practical tools for real-time air pollution assessment and for informing targeted urban air quality interventions. Full article

The development of local energy communities observed in the last years requires the reorganization of energy consumption and production. In these newly considered energy systems, the commercial and technical decision processes should be decentralized in order to reduce their maintenance costs. This will be allowed by the progressive spreading of IoT systems capable of interacting with distributed energy resources, giving local sources the ability to be optimally coordinated in terms of network and energy management. In this context, this paper presents a decentralized controlling architecture that performs a wide spectrum of power system optimization procedures oriented to the local market management. The controller framework is based on a decentralized genetic algorithm. The manuscript describes the structure of the tool and its validation, considering an automated distributed resource scheduling for local energy markets. The simulation platform permits implementing the blockchain-based trading process and the automated distributed resource scheduling. The effectiveness of the tool proposed is discussed with a hardware-in-the-loop case study. Full article

This paper suggests an application of blockchain as an energy open data ledger, designed to save and track data regarding the energy footprint of public buildings and public energy communities. The developed platform permits writing energy production and consumption of public buildings using blockchain-enabled smart meters. Once authenticated on the blockchain, this data can be made available to the public domain for techno-economic analyses for either research studies and internal or third parties audits, increasing, in this way, the perceived transparency of the public institutions. A further feature of the platform, starting on the previously disclosed raw data, allows calculating, validating, and sharing sustainability indicators of public buildings and facilities, allowing the tracking of their improvements in sustainability goals. The paper also provides the preliminary results of a field-test experimentation of the proposed platform on a group of public buildings, highlighting the possible benefits of its widespread exploitation. Full article

At the moment of writing, in Italy, there is an ongoing pandemic of coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Its outbreak is leading to severe global socioeconomic disruptions impacting on all economic sectors from tourism, industry and the tertiary sector, up to the operational and opening of public offices, the closure of schools and the organization of families. Measures adopted by the Italian government to deal with the COVID-19 emergency have had direct effects both on people’s daily lives and on the activity of most industrial and commercial production companies. These changes have been unequivocally reflected also on the Italian electricity system, which has shown unprecedented behavior in terms of both energy consumption and volume—and subsequently, in the observed share of renewable and conventional production technologies. The goal of this study is to show the impact on the power industry of all the restrictions and lockdown of the activities in Italy and to discuss the effects of COVID-19 outbreak on the bulk power system and the entire electricity sector. In particular, the consequences on load profiles, electricity consumption and market prices in Italy, including the environmental aspects, are examined. Full article

Presented in this paper is a Multistage Design Procedure (MSDP) for planning and implementing Public Charging Infrastructures (PCIs) to satisfy intracity charging demand of Electric Vehicles (EVs). The proposed MSDP splits planning and design processes into multiple stages, from macroscale to fine-scale levels. Consequently, the preliminary results achieved at each stage can be refined at the subsequent stages, leading to determine the accurate number and precise geographical location of each charging point. The main advantage of the proposed approach is that it splits a very complicated procedure into multiple and simpler stages, at each of which appropriate goals, targets and constraints can be included. As a result, the iterative interactions among all the stakeholders involved in the PCI design process are significantly simplified. The proposed MSDP has been employed in the planning and design of the PCI of the Italian island of Sardinia, accordingly to all the public bodies. Full article

The newest Distributed Ledger Technology platforms, which delegate the execution of complex tasks in the form of Smart Contracts, make it possible to devise novel local electricity market frameworks, which are performed in a fully automated fashion. This paper proposes a novel fully automated platform for energy and ancillary service markets in distribution networks, able to run in a decentralized fashion, bypassing the need for a physical central authority. The proposed platform, able to perform the role of Virtual Decentralized Market Authority, shows excellent potential applications in the management of local ancillary service markets in local energy communities of various sizes. The proposed Virtual Decentralized Market Authority showed reasonable running costs and comparable technical management capabilities with respect to a physical, centralized managing authority. Full article

In recent years, many studies have proposed the use of energy storage systems (ESSs) for the mitigation of renewable energy source (RES) intermittent power output. However, the correct estimation of the ESS degradation costs is still an open issue, due to the difficult estimation of their aging in the presence of intermittent power inputs. This is particularly true for battery ESSs (BESSs), which have been proven to exhibit complex aging functions. Unfortunately, this collides with considering aging costs when performing ESS planning and management procedures, which are crucial for the exploitation of this technology. In order to overcome this issue, this paper presents the genetic algorithm-based multi-period optimal power flow (GA-MPOPF) procedure, which aims to economically optimize the management of ESSs by taking into account their degradation costs. The proposed methodology has been tested in two different applications: the planning of the correct positioning of a Li-ion BESS in the PG& E 69 bus network in the presence of high RES penetration, and the definition of its management strategy. Simulation results show that GA-MPOPF is able to optimize the ESS usage for time scales of up to one month, even for complex operative costs functions, showing at the same time excellent convergence properties. Full article