Search Results (11)

Objective: This study aims to develop an intranasal (IN) delivery system for glioblastoma multiforme (GBM) management using repurposed superparamagnetic iron-oxide (SPION) loaded with atorvastatin (ATO)-nanostructured lipid carrier (NLC). Methods: Emulsification and ultrasonication were used to formulate ATO-NLCs, and the best formula was loaded with SPION to make the final atorvastatin/superparamagnetic iron oxide-loaded nanostructured lipid carrier (ASN) formulation. Entrapment efficiency (EE%), particle size (PS), zeta potential (ZP), and drug release after 6 h (Q6h) were evaluated for NLCs. ASN was tested for cytotoxicity on T98G cancer cells, and the cell cycle was examined to determine cell death. Furthermore, the ability of the optimal formulation to suppress the levels of inflammatory biomarkers was investigated in Lipopolysaccharide (LPS)-induced inflammation. The brain-targeting behavior of IN-ASN was visualized in rabbits via confocal laser scanning microscopy (CLSM). Results: The optimum NLC exhibited a spherical shape, EE% of 84.0 ± 0.67%, PS of 282.50 ± 0.51 nm, ZP of −18.40 ± 0.15 mV, and Q6h of 89.23%. The cytotoxicity of ASN against cancer cells was 4.4-fold higher than ATO suspension, with a 1.3-fold increment in cell apoptosis. ASN showed significantly reduced pro-inflammatory biomarkers (IL-β, IL-6, TNF-α, TLR4, NF-қB), whereas CLSM revealed enhanced brain delivery with no observed histopathological nasal irritation. The in silico analysis demonstrated enhanced ATO-ADME (absorption, distribution, metabolism, and excretion) properties, while the network pharmacology study identified 10 target GBM genes, among which MAPK3 was the most prominent with a good binding score as elucidated by the simulated docking study. Conclusions: These findings may present ATO/SPION-NLCs as significant evidence for repurposing atorvastatin in the treatment of glioblastoma multiforme. Full article

Objectives: This study aimed to develop hesperidin solid lipid nanoparticles (HESP-SLNs) to enhance their stability, solubility, and sustained release for wound healing; further enhancement was achieved through prepared nanostructured lipid carriers (HESP-NLCs) using Tea Tree Oil (TTO) to explore their synergistic efficacy. Methods: A factorial design of 2⁴ trials was established to evaluate the influence of lipid type (X1), lipid conc (%) (X2), surfactant type (X3), and sonication amplitude (%) (X4) of prepared HESP-SLNs on the particle size (nm) (Y1), polydispersibility index (Y2), zeta potential (Y3), and encapsulation efficiency (%) (Y4). The optimized HESP-SLNs formula was selected utilizing Design Expert^® software version 13, which was additionally enhanced by preparing TTO-loaded HESP-NLCs. In vitro release, Raman spectroscopy, and transmission electron microscopy were carried out for both lipid nanoparticles. Cytotoxicity, in vivo wound-healing assessments, and skin irritancy tests were performed to evaluate the performance of TTO-incorporated HESP-NLCs compared to HESP-SLNs. Results: The optimized formula demonstrated PS (280 ± 1.35 nm), ZP (−39.4 ± 0.92 mV), PDI (0.239 ± 0.012), and EE% (88.2 ± 2.09%). NLCs enhanced Q6% release, (95.14%) vs. (79.69%), for SLNs and showed superior antimicrobial efficacy. Both lipid nanoparticles exhibited spherical morphology and compatibility between HESP and excipients. NLCs achieved the highest wound closure percentage, supported by histological analysis and inflammatory biomarker outcomes. Cytotoxicity evaluation showed 87% cell viability compared to untreated HSF cells, and the skin irritancy test confirmed the safety of NLCs. Conclusions: TTO-loaded HESP-NLCs are promising candidates exhibiting superior wound-healing capabilities, making them a potential therapeutic option for cutaneous wound management. Full article

Etoricoxib, as a model drug, has a poor solubility and dissolution rate. Cyclodextrin derivatives can be used to solve such a problem. A comparative study was run on three cyclodextrin derivatives, namely β-CD, HP β-CD, and SBE β-CD, to solve the drug problem through the formulation of solid dispersions and their preparation into fast-dissolving tablets. Preparations utilized different (1:1, 1:2, and 1:4) drug:carrier ratios. Nine fast-dissolving tablets (containing 1:4 drug: carrier) were formulated using Prosolv ODT^® and/or F-melt^® type C as super-disintegrants. Optimized formulation was chosen based on a 3² factorial design. The responses chosen were the outcomes of the in vitro evaluation tests. The optimized formulation that had the highest desirability (0.86) was found to be SD-HP3, which was prepared from etoricoxib: HP β-CD at a 1:4 ratio using equal amounts of Prosolv ODT^® and F-melt^® type C. An in vivo evaluation of SD-HP3 on a rabbit model revealed its superiority over the marketed product Arcoxia^®. SD-HP3 showed a significantly lower Tmax (13.3 min) and a significantly higher Cmax (9122.156 μg/mL), as well as a significantly higher AUC, than Arcoxia^®. Thus, the solubility, dissolution, and bioavailability of etoricoxib were significantly enhanced. Full article

The study aims to investigate the ability of lyophilized nasal inserts of nanosized atomoxetine HCl solid lipid nanoparticles (ATM-SLNs) to transport atomoxetine (ATM) directly to the brain and overcome the first-pass metabolism. In this case, 16 formulae of (ATM-SLNs) were prepared using hot melt emulsification, stirring and ultrasonication method technique. A full factorial design was established with 2⁴ trials by optimization of four variables; lipid type (Compritol 888 ATO or stearic acid) (X1), lipid to drug ratio [(1:2) or (2:1)] (X2), span 60: Pluronic f127 ratio [(1:3) or (3:1)] (X3) and probe sonication time (five or ten minutes) (X4). The prepared SLNs were characterized for entrapment efficiency (EE%), in-vitro drug release after 30 min (Q30min), particle size (PS), zeta potential (ZP) and polydispersity index (PDI). Design Expert^® software was used to select the optimum two formulae. The morphological examination for the optimum two formulae was carried out using a transmission electron microscope (TEM). Furthermore, eight lyophilized nasal inserts were prepared by using a 2³ full factorial design by optimization of three variables: type of (ATM-SLNs) formula (X1), type of polymer (NOVEON AA1 or HPMC K100m) (X2) and concentration of polymer (X3). They were evaluated for nasal inserts’ physicochemical properties. The two optimum inserts were selected by Design Expert^® software. The two optimum insets with the highest desirability values were (S4 and S8). They were subjected to DSC thermal stability study and in-vivo study on rats. They were compared with atomoxetine oral solution, atomoxetine (3 mg/kg, intraperitoneal injection) and the pure atomoxetine solution loaded in lyophilized insert. (ATM-SLNs) showed EE% range of (41.14 mg ± 1.8% to 90.6 mg ± 2.8%), (Q30min%) of (27.11 ± 5.9% to 91.08 ± 0.15%), ZP of (−8.52 ± 0.75 to −28.4 ± 0.212% mV), PS of (320.9 ± 110.81% nm to 936.7 ± 229.6% nm) and PDI of (0.222 ± 0.132% to 0.658 ± 0.03%). Additionally, the two optimum (ATM-SLNs) formulae chosen, i.e., F7 and F9 showed spherical morphology. Nasal inserts had assay of drug content of (82.5 ± 2.5% to 103.94 ± 3.94%), Q15min% of (89.9 ± 6.4% to 100%) and Muco-adhesion strength of (3510.5 ± 140.21 to 9319.5 ± 39.425). DSC results of S4 and S8 showed compatibility of (ATM) with the other excipients. S8 and S4 also showed higher trans-nasal permeation to the brain with brain targeting efficiency of (211.3% and 177.42%, respectively) and drug transport percentages of (52.7% and 43.64%, respectively). To conclude, lyophilized nasal inserts of (ATM-SLNs) enhanced (ATM) trans-nasal drug targeting permeation and brain targeting efficiency. Full article

To explore the performance of the cationic nanocarrier leciplex (LPX) in escalating the oral bioavailability of vancomycin hydrochloride (VAN) by promoting its intestinal permeability. With the aid of a D-optimal design, the effect of numerous factors, including lipid molar ratio, cationic surfactant molar ratio, cationic surfactant type, and lipid type, on LPX characteristics, including entrapment efficacy (EE%), particle size (P.S.), polydispersity index (P.I.), zeta potential value (Z.P.), and steady-state flux (Jss) were assessed. The optimized formula was further evaluated in terms of morphology, ex vivo permeation, stability, cytotoxicity, and in vivo pharmacokinetic study. The optimized formula was spherical-shaped with an E.E. of 85.2 ± 0.95%, a P.S. of 52.74 ± 0.91 nm, a P.I. of 0.21 ± 0.02, a Z.P. of + 60.8 ± 1.75 mV, and a Jss of 175.03 ± 1.68 µg/cm²/h. Furthermore, the formula increased the intestinal permeability of VAN by 2.3-fold compared to the drug solution. Additionally, the formula was stable, revealed good mucoadhesive properties, and was well tolerated for oral administration. The in vivo pharmacokinetic study demonstrated that the VAN C_max increased by 2.99-folds and AUC_0-12 by 3.41-folds compared to the drug solution. These outcomes proved the potentiality of LPX in increasing the oral bioavailability of poorly absorbed drugs. Full article

The current study aims to develop niosomal nanocarriers for intranasal delivery of dronedarone hydrochloride to ameliorate its limited bioavailability. Niosomes were prepared by ethanol injection method and optimized using 3² full factorial experimental design. Both Span^® type (X1) and Span^®: cholesterol ratio (X2) were set as independent variables. Vesicle size (Y1), polydispersity index (Y2), zeta potential (Y3), and entrapment efficiency (Y4) were set as responses. The optimal formula was further incorporated into an ion-sensitive in situ gelling polymer for intranasal delivery. Optimal formula (N7), which is composed of Span^® 80: cholesterol (1:1), was of the least vesicle size (121.27 ± 13.31 nm), least polydispersity index (0.43 ± 0.073), highest zeta potential (−22.23 ± 2.84 mV) and highest entrapment efficiency (73.44 ± 2.8%). About 75.86% and 60.29% of dronedarone hydrochloride were released from N7 dispersion and in situ gel, respectively, within 12 h, compared to only 13.3% released from a drug-free suspension. In vivo pharmacokinetic study on male New Zealand rabbits resulted in significantly higher C_max, AUC_0–72, and AUC_0–∞ of intranasal niosomal in situ gel compared to oral suspension. Almost twofold amplification of relative bioavailability was obtained after intranasal administration of niosomal in situ gel (195.7%) compared to oral suspension. Full article

This study aims to develop efficient topical therapy for keratomycosis using sertaconazolenitrate (STZN)-loaded leciplex (LP). The D-optimal design was used to optimize STZN-loaded LP by utilizing soy phosphatidylcholine (SPC) molar ratio (X₁), cationic surfactant molar ratio (X₂), and cationic surfactant type (X₃) as the independent variables, whereas their impact was studied for entrapment efficiency percent (EE; Y₁), particle size (PS; Y₂), polydispersity index (PDI; Y₃), zeta potential (ZP; Y₄), and permeability coefficient (Kp; Y₅). The optimized formula was evaluated regarding morphology, ex vivo permeation, mucoadhesion, stability, and in vivo studies. The optimized formula was spherical and showed EE of 84.87 ± 1.71%, PS of 39.70 ± 1.35 nm, PDI of 0.242 ± 0.006, ZP of +54.60 ± 0.24 mV, and Kp of 0.0577 ± 0.0001 cm/h. The ex vivo permeation study revealed that the optimized formula enhanced the Kp and corneal deposition by 2.78 and 12.49 folds, respectively, compared to the aqueous drug dispersion. Furthermore, the optimized formula was stable and revealed promising mucoadhesion properties. Finally, the in vivo studies showed that the optimized formula was superior to the drug dispersion in treating rats with induced keratomycosis. These results confirmed the capabilities of LP as a promising nanocarrier for treating ocular diseases topically. Full article

Pioglitazone Hydrochloride (PGZ) suffers from poor aqueous solubility. The aim of this research was to design orally disintegrating tablets with self-nanoemulsifying properties (T-SNEDDS) to improve the Pioglitazone solubility and dissolution rate. Three liquid self-nanoemulsifying systems (L-SNEDDS) were formulated and evaluated for transmittance percentage, emulsification time, particle size, Poly dispersity index (PDI), percentage of content, solubility and stability. The optimum L-SNEDDS formula was converted to a solidified self-nanoemulsifying drug delivery system (S-SNEDDS) by adsorption on Syloid (SYL). Powder characterization tests, such as flowability tests, differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM), were performed for the selected S-SNEDDS formulation. Orally disintegrating tablets (ODT) were formulated by blending S-SNEDDS with tableting excipients. The ODT tablet batch composed of Prosolv was selected for tablet quality control tests, such as hardness, friability, disintegration time, content uniformity, weight variation, in vitro release, in vivo studies and accelerated stability studies. ODT tablets showed accepted mechanical properties and rapid disintegration time (<30 s). No drug degradation was observed at 3 months into the accelerated stability study. The optimized L-SNEDDS, S-SNEDDS and ODT (T-SNEDDS), showed significant enhancement of PGZ in vitro dissolution profiles compared to the pure drug (p > 0.05). In vivo pharmacokinetic and pharmacodynamic evaluation of ODTs showed better behavior compared to the raw drug suspension and the commercial tablet (p > 0.05). Orally disintegrating tablets revealed a promising potential to improve Pioglitazone poor aqueous solubility, dissolution profile and bioavailability. Full article

Bisoprolol hemifumarate (BH) is an antihypertensive drug that is used as first-line treatment for chronic hypertension and angina pectoris. Our study was performed to enhance the transdermal delivery of BH, a hydrophilic drug active with high molecular weight, through differently prepared hydrogels. The synergistic effect of permeation enhancers and iontophoresis was investigated via both ex vivo and in vivo permeation studies. Ex vivo iontophoretic permeation studies were performed by using male albino Wistar rat skin. Cellosolve^® hydrogel (F7) showed a 1.5-fold increase in Q₁₈₀, Jss, and FER compared to F5 (lacking permeation enhancer). BH pharmacokinetic data were studied in human volunteers, following transdermal delivery of F7, using Phoresor^® Unit II iontophoresis device, compared to conventional oral tablets. F7 showed 1.9- and 2-fold higher values of C_max and AUC_0–40, respectively compared to Concor^® tablets, as well as a smaller T_max (2.00 ± 2.00 h). The relative bioavailability of F7 was found to be 201.44%, relative to Concor^® tablets, demonstrating the significantly enhanced transdermal permeation of BH from the selected hydrogel by iontophoresis, in human volunteers. Finally, results showed the successful utility of permeation enhancers combined with iontophoresis in significantly enhanced transdermal permeation of BH, despite its large molecular weight and hydrophilic nature. Therefore, this strategy could be employed as a successful alternative route of administration to conventional oral tablets. Full article

Acetazolamide (ACZ) is a diuretic used in glaucoma treatment; it has many side effects. Carvedilol (CAR) is a non-cardioselective beta-blocker used in the treatment of elevated intraocular pressure; it is subjected to the first-pass metabolism and causes fluids accumulation leading to edema. This study focuses on overcoming previous side effects by using a topical formula of a combination of the two previous drugs. Sixty formulations of niosomes containing Span 20, Span 60, Tween 20, and Tween 60 with two different ratios were prepared and characterized. Formulation with the lowest particle size (416.30 ± 0.23), the highest zeta potential (72.04 ± 0.43 mv), and the highest apparent coefficient of corneal permeability (0.02 ± 0.29 cm/h) were selected. The selected formula was incorporated into the gel using factorial design 2³. Niosomes (acetazolamide/carvedilol) consisting of Span 60 and cholesterol in the molar ratio (7:6), HMPC, and carbopol with two different ratios were used. The selected formula was subjected to an in vivo study of intraocular pressure in ocular hypertensive rabbits for 60 h. The sustained gel formula of the combination decreased (IOP) to normal after 1 h and sustained efficacy for 4 days. Histological analysis of rabbit eyeballs treated with the selected formula showed improvement in glaucomatous eye retinal atrophy. Full article

Biopolymeric chitosan structure (Cs) is rationally investigated owing to its potentiality in pharmaceutical applications. The synthetic routes of biomimetic Cs-based blend electrospun nanofibers were studied. Herein, biocompatible crosslinked electrospun polyvinyl alcohol (PVA)/Cs-reduced gold nanoparticles (Cs(Rg))/β-CD (beta-cyclodextrin) in pure water were fabricated. To this end, supportive PVA as a carrier, Cs bio modifier, and gold reductant and β-CD as smoother, inclusion guest molecule, and capping agent exhibit efficient entrapment of moxifloxacin (Mox) and consequently accelerate release. Besides, PVA/Cs(Rg)/β-CD paves towards controlled drug encapsulation-release affinity, antimicrobial, and for wound dressing. Without losing the nanofiber structure, the webs prolonged stability for particle size and release content up to 96.4%. The synergistic effect of the nanoformulation PVA/Cs(Rg)/β-CD against pathogenic bacteria, fungus, and yeast, including Staphylococcus aureus, Escherichia coli, Candida albicans, and Aspergillus niger, posed clear zones up to 53 φmm. Furthermore, a certain combination of PVA/Cs (Rg)/β-CD showed a total antioxidant capacity of 311.10 ± 2.86 mg AAE/g sample. In vitro cytotoxicity assay of HePG2 and MCF-7 NF6 can eradicate 34.8 and 29.3 µg/mL against selected cells. Full article